研究者们用薄膜聚合物做成了人工翅膀，用加上塑料制的血管，使它就像是一只真正的燕尾蝶。
The researchers made artificial wings from a thin film of polymer, fabricating them with plastic veins mimicking those of an actual swallowtail butterfly.
用接触电位差（CPD ）方法研究了导电聚合物MEH-PPV薄膜的光电特性。
The photoelectric characteristics of conducting polymer MEH - PPV film were studied using contact potential difference ( CPD ) method.
聚氨酯薄膜的耐磨性胜过许多其他常见的聚合物。较天然橡胶耐磨五倍以上，是耐磨制品的首选材料之一。
Polyurethane film handily outperforms many other common polymers when it comes to abrasion resistance. Five times more resistant than natural rubber, the material is of choice of wear products.
总的说来，此聚合物与低密度聚乙烯性质相似，但在薄膜中的强度性质要好一些，因此这就是其主要应用领域。
Overall the polymer has similar properties to LDPE, but has somewhat better strength properties in films, and hence this is its major area of use.
具有要增湿的固体聚合物薄膜的燃料电池，燃料电池系统，以及用于燃料电池的增湿方法。
Fuel cell with solid polymer membrane to be moisturized, fuel cell system, and moisturizing method for fuel cell.
纳米孔隙聚合物薄膜为我们提供了一种全新的思路。
Nanoporous polymer films give us a totally new idea to solve these problems.
有机、聚合物薄膜电致发光是近几年来国际上一个研究热点。
Organic and polymer thin film electroluminescent devices have become a fascinating field in recent years.
采用单光束Z扫描技术对新型光学存储材料偶氮分散红聚合物的薄膜样品进行了测量。
A new type of optical storing material, the film sample of azobenzene disperse red polymer is measured by using the single beam Z-scan technique.
本文对CCD扫描式聚合物薄膜缺陷检测的关键技术进行了深入研究。
Key technologies of CCD scanning polymer film materials defects detection are deeply investigated in this thesis.
研究了不同偏振全息模式下基于交联偶氮苯聚合物薄膜的相位光栅的形成机理、衍射效率和偏振特性。
The forming mechanism, diffraction efficiency and polarization characteristic of phase gratings written in cross-linked azobenzene copolymer films under different holography modes were studied.
实验结果表明该掺杂偶氮苯聚合物薄膜在低激励光强下具有良好的光信息储存性能，是一种很有潜力的光储存材料。
The experimental results showed that the new polymer film has a good characterization for optical storage with the conditions of low exciting beam intensity.
本文实验研究了偶氮侧链聚合物液晶薄膜(P -CN)的光致双折射和光存储性质。
Optical storage based on photoinduced birefringence in azobenzene side-chain polymer liquid crystal (P-CN) film is reported.
利用ICP -CVD工艺制备出一种新型厌水性碳氟聚合物薄膜，并给出了制备薄膜的工艺参数。
It puts forward the techniques of depositing hydrophobic thin films of the fluorocarbon polymer by ICP-CVD and the process factors of ICP-CVD.
综述了有机硅烷偶联剂的种类、成膜机理、聚合物-金属界面模型、薄膜制备、薄膜及涂层制品的性能。
The types of silane coupling agents, the mechanism of film formation, model of polymer-metal interface, the preparation of silane films and the properties of films and coatings were summarized.
并用此装置测量了一系列聚合物薄膜的透氧性。
With this apparatus, a series of polymeric membranes were tested.
用接触电位差(CPD)方法研究了导电聚合物meh - PPV薄膜的光电特性。
The photoelectric characteristics of conducting polymer MEH-PPV thin film were studied using contact potential difference (CPD) method.
报道了一种测量聚合物薄膜电光系数的简单方法。
A simple interferometric method for measuring the linear electro optic coefficients of poled polymer films is described.
报道了偶氮苯聚合物薄膜中的斑图形成，横向效应及准晶结构。
Pattern formation and transverse effect are reported for azobenzene polymer film.
文章综述了测量非线性光学(nlo)聚合物薄膜材料光波导传输损耗的三种新方法及原理，分别给出了典型的实验装置结构图，并对它们的特点进行了比较。
The principles of the common methods to measurement the propagation loss of the NLO polymer film optical waveguide are summarized, and the typical experimental arrangements are presented.
淬火可以使聚合物薄膜材料改性。
应用最小二乘法，通过对中心复合设计实验数据的拟合，建立了旋涂法制备聚合物薄膜的膜厚回归模型。
In this paper, the regression model of the polymer film-thickness spin-coating is established by using the least squares and the experimental data fitting with central composite design.
在聚合物薄膜和基板之间可以包括压花层。
An embossing layer may be included between the polymer film and substrate.
本文演示了用阿贝折射仪测定染料掺杂聚合物薄膜热光系数的方法；
The measurements of thermal optical coefficient (TOC) for organic dye doped polymer films using Abbé refractometer was demonstrated;
其次，在光致各向异性研究的基础上，完成了两种偶氮液晶聚合物薄膜中的偏振全息记录。
Second, on the basis of the characterization of photoinduced anisotropy, polarization holographic recordings are accomplished in the azo-containing liquid crystalline polymer.
本文对标准模板和聚合物薄膜材料进行了实验验证。
具有结构紧凑、设计合理、 能同时对聚合物薄膜两面进行镀覆膜层的特点。
The coating device has the characteristics of compact structure, reasonable design and the capability of simultaneously plating two sides of a polymer film with film covering layers.
聚合物薄膜是制造聚合物光电调制器的基础。
Polymer film is the basis for fabricating electro-optics polymer modulators.
本发明公开了其至少一个表面上具有微结构特征物的拉伸制品(如取向的聚合物薄膜或纤维)以及用于制备此类制品的方法。
Stretched articles, such as oriented polymeric films or fibers, having microstructure features on at least one surface thereof, and processes for making such articles, are disclosed.
叙述了聚乙炔的合成和结构、聚乙炔掺杂以及近年来新开拓的导电聚合物-聚荼、硅-酞菁聚合物及聚噻吩薄膜；
It stated Polyacetylene synthesis and structure, mix of polyace-ty and recently developed new electric polymer: polynaphthal-ene, polysiliconphthalocyanine and polythiophene membrane.
叙述了聚乙炔的合成和结构、聚乙炔掺杂以及近年来新开拓的导电聚合物-聚荼、硅-酞菁聚合物及聚噻吩薄膜；
It stated Polyacetylene synthesis and structure, mix of polyace-ty and recently developed new electric polymer: polynaphthal-ene, polysiliconphthalocyanine and polythiophene membrane.
应用推荐