门户工具包可为内容部分提供插件系统，以便在没有深入钻研许多技术细节的情况下，使设计人员从大量联机服务中挑选服务时变得更容易。
Portal toolkits could provide a plug-in system for content sections to make it easier for designers to pick from a wide range of on-line services without delving into a lot of technical details.
本文以数据仓库为基础，与目前流行的联机分析处理、数据挖掘等技术相结合，提出了基于此的决策支持系统的设计。
Take data warehouse as foundation, with the aid of on Line Analytical Processing and data Mining technology, the composition and design of enterprise Decision Support System are put forward.
本文设计的生化分析仪已经过系统的联机调试，运行稳定、结果正确，表明系统的设计是合理的、可靠的。
The design of biochemical analyzer has been adopted online system debugging, it can run stably, and the result is correct, so the system design is reasonable and reliable.
具有热水功能的多联机实现了空气调节和热水功能的一体化设计，是一种优良的家庭热力循环系统解决方案。
The functions of air-conditioner and water-heater are combined in this system. It's a good solution of domestic thermal circulation.
对并联机床数控系统进行了软件模块划分，重点介绍了程序设计模块、加工及仿真模块、手动测量模块的主要功能。
In this paper, the software module of PMT NC system is divided, and the programming module, processing module, simulation module and hand control module are introduced.
描述了一个基于特征点匹配的联机指纹验证系统设计思想和实现方法。
Describes the design and implementation of an on line fingerprint verification system based on minutiae matching.
基于ADAMS软件在多刚(柔)体系统分析中的应用，将ADAMS软件应用于平面3 -RRR并联机器人的参数化设计与仿真。
Based on the application of ADAMS in the analysis of multi-rigid (deformable) -body system, ADAMS is applied to parameterized design and simulation of a planar parallel manipulator 3-rrr.
设计用于快速的，多功能的多件头包装，联机的飞行杆式打包机有路线分割填料系统的特性，该特性将产品分成多排，可产生理想的效果。
Intended for quick and versatile multipacking, inline flight bar bundlers feature a lane dividing infeed system that dispenses products into a preconfigured number of rows, producing the desired.
本文首先对CALIS联机合作编目数据和图书在版编目中心（CIP）数据给予了介绍，然后重点就基于CIP数据应用基础上的自动化编目系统模型设计等方面做了详细阐述和探讨。
The paper has introduced CALIS and CIP, and expounded and studied in detail the model design of automatic cataloging system based on the application of CALIS and CIP data.
本文设计的基于并联机器人的平衡训练系统主要用于动态平衡能力的训练。
In this paper, a balance training system based on parallel robot is designed to train the dynamic balance ability.
本文研究了基于XML和J2ME的无线联机定购系统的实现，并且设计了一个飞机票定购系统。
This paper discusses how to carry out wireless online ordering system based on XML and J2ME and designs a system of ordering airplane ticket.
系统完成后，经联机仿真调试和实际通信结果表明：性能良好，达到了预定的设计指标要求。
The result is verified to attain the index requirements by debugging and practical operating, after system design has finished.
重点阐述了多联机空调系统的设计与应用，研究了其经济性能，论证了多联机系统的优势及发展前景。
The design and application of VRV air-conditioning system are expounded with its economic performance, demonstrating the advantages and the prospects of VRV air-conditioning system.
推导了并联机床位置、速度逆解模型，设计了面向该并联机床的CNC系统方案。
Inverse displacement analysis model and inverse kinematic analysis model are derived, scheme of CNC system for PMT is designed.
利用该评判模型，给出了一种适用于混联机械系统设计初期可靠度模糊分配的一般性方法。
A general approach to fuzzy apportionment of mechanical system reliability during conceptual design, which is suitable for a series-parallel system, is developed in terms of the improved model.
分析了柔性并联机构系统的固有频率与设计参数的关系。
The relationship of the natural frequency and design parameters of the parallel mechanism were studied.
多维联机数据分析模型(MOLDA)是笔者根据多个项目的需要而研究和设计的一个联机分析处理(OLAP)系统模型。
MOLDA (Multi dimensional on Line Data analysis) is an OLAP system model, designed and developed by the author for the development of several business analysis projects.
在研究了联机分析处理与数据挖掘集成的联机分析挖掘系统基础上，设计了基于达梦联机分析处理服务器的数据立方梯度联机挖掘工具DM_MCGOBC。
After the online analytical mining model is studied, an online cube gradient mining tool DM_MCGOBC is designed based on the online analytical processing server DM_OLAP.
将叠层橡胶支座和R／C柱的串联机构作为隔震系统的做法在实际工程中已有应用，但至今尚无规范化的设计计算方法。
The serial isolation system consisting of laminated rubber bearing and R/C column has been applied in practical building, but without the corresponding codes for calculation and design yet.
研究了基于PC机的并联机床数控系统的设计和开发。
This paper studies the design and development of a PC based NC system for parallel Kinematic Machine (PKM).
介绍了并联机床开放式数控系统的软件、硬件设计。
The paper introduces the design of the software and hardware of the opening NC system for the parallel machine tool.
实验结果表明了本并联机构控制系统硬件与软件设计的可行性、正确性与有效性。
Experiment result approved the feasibility, correctness and validity of the design of hardware and software of the parallel mechanism control system.
分析了并联机床加工中心数控系统的设计。
Design and development of a PC based NC system for Parallel Kinematic Machine(PKM) was analyzed.
论文首先在分析了并联机构的自由度、运动学的基础上设计完成了机构控制系统的硬件部分。
First of all, this paper design and complete the hardware of the mechanism control system, on the foundation of analysis DOF and kinematics of the parallel robot.
通过与所有的设备联机调试，证明系统运行稳定，数据库记录正确，达到设计要求。
Having been debugged with combined with all the relational equipments, the system was proved running stability, and the records of database were all right. The requirements of design were achieved.
对重联机车中JZ 7型制动机系统的高压安全阀的安装位置及打风压力继电器（调压器）控制风管的连接位置进行了分析、讨论，指出了现有机车中设计、制造上存在的缺陷，并在实际运用中进行了改造。
The mounted location of high-pressure safty valve and the connecting position of the control air pipe of air pressure relay of JZ-7 brake system are analysed.
介绍了并联机床虚拟产品设计系统（P MT V PDS）的基本框架及其子系统功能。
The basic framework of Virtual Product Design System for Parallel Machine Tools (PMT VPDS) and functions of three subsystems are introduced. The archetypal system is developed.
通过系统软硬件联机调试，完成了心率测量仪的设计。
The heart rate meter design is completed via software and hardware debugging.
应用单片机和相关电路，采用汇编语言编程，设计智能控制系统，与普通X线机联机，进行曝光控制。
An intelligent control system has been designed using the single chip and the related circuit, and with the assemble language. It is connected with the common X-ray units to control the exposure dose.
最后依据所开发的软件系统，对3-RPS并联机构在其工作空间内的动态特性进行了仿真分析，得出了一些对混联数控机床的设计和应用有益的结论。
Trough simulating the characteristics of the 3-RPS parallel mechanism, some conclusion can be obtained which is helpful to design the serial-parallel machine tool.
应用推荐