那就叫它龙骨翼板怎么样？
主动控制翼板是一种新型桥梁气动措施。
Using active aerodynamic wing is a new aerodynamic measure for bridge stability.
在列车上布置若干翼板。
组合梁上部为钢筋混凝土翼板及压型钢板。
The top of the composite beam is a reinforced concrete wing plate and a profiling steel plate.
本文提出了一种新桩型—带翼板预应力管桩。
In this paper, a new type of prestressed concrete pipe pile with wing plates is presented.
组合梁是钢梁和其上混凝土翼板共同抗弯的一种构件。
The composite beam is a component comprised the steel beam and the concrete flange plate on the steel beam.
混凝土翼板处于受拉区，受力复杂，需要进一步研究。
Concrete slab was tensioned, and complex situation was researched deeply.
从能量的角度研究气动翼板控制悬索桥颤振的物理机理。
Flutter control of the suspension Bridges by pneumatic winglets is studied from the standpoint of energy mechanism.
这些块不再有红色的标题；转向，悬挂，旋转，机翼，翼板。
These blocks no longer have red titles; Steering, Suspension, Spinning, Wing, Wing Panel.
国内外对组合梁混凝土翼板有效宽度的研究，弹性分析较多。
The study about effective width in and abroad are mostly based on theory of elasticity.
为此，定量研究孔型和工艺参数对翼板钢宽展的影响十分重要。
So it is very important to study the parameters of the pass and techniques for the spread of the wing plate steel.
研究还发现，体外索应力与混凝土翼板最大压应变有密切的关系。
It is also found that there is a close relationship between the stress in external tendon and the maximum compressive strain of the concrete flange slab.
分析表明，主梁下风侧附加翼板对悬索桥颤振是一种有效的气动控制措施。
The analysis shows that the additional surface attached below the trailing edge is an effective aerodynamic means for suppressing the flutter of suspension Bridges.
介绍了五座城市立交桥或高架桥的钢筋混凝土连续箱梁翼板横向开裂的情况。
The cases of transverse cracking in the flange slabs of reinforced concrete continuous box girders of five urban flyovers or viaducts are introduced.
技术特点：本生产线具有翼板与腹板自动对中组立、翼板变形矫正、焊板速度可调等功能。
Technical character:This machine can perform the centering and assembling of both flange and web automatically, straightening of flange deformation, welding speed adjustment.
剪切变形的影响使得箱形梁的翼板中出现应力不均匀现象，尤其是悬臂箱形梁剪力滞现象。
The influence of shearing deformation causes the non-uniform stress in the wing plate of the box girder, especially the cantilever box girder.
然后，按照随机的顺序，对模拟的金属翼板粘结桥模型逐一进行了整体结构的轴向剪切拉力测试。
Then axil shear tractive force of the whole structure of imitate bridge was measured in each.
该流体箱可具有至少一个封闭流体容器和将至少一个封闭流体容器与第一翼板相连的第一安装件。
The fluid box has at least one closed fluid container and at least one first installing piece for connecting the closed container to the first wing plate.
钢与混凝土组合梁的设计和分析中，通过引入有效翼缘宽度的概念考虑混凝土翼板中剪力滞后的影响。
In the analysis and design of steel-concrete composite beams, the concept of effective flange width is introduced to consider the impact of shear lag.
结果显示，变形区内横截面应变分布非常复杂，腹板和翼板间的金属交换在不同变形区域内发生方向变化。
The strain in the deformation zone distributes very complicatedly in cross section. The metal exchange between web and flange takes place in alternative direction as the deformation is in progress.
不仅如此，翼板还会充当一个手绢的角色，擦抹干净细微轨道上的残留物，比如在前一次发射时留下的斑点印记。
Not only that, but the sail will also act like a handkerchief, mopping up microscopic orbital detritus such as flecks of paint from previous launches.
本实用新型涉及一种轻型卡车复合前翼板，解决了现有轻型载货汽车 前翼板消除发动机噪声效果很差的问题。
The utility model relates to a combined front wing for a light-duty truck, solving the problem that existing front wing for a light-duty truck is poor in effect to eliminate the noise of the engine.
此外，利用ANSYS的高级应用技术，论文还对变截面翼板的变截面进行了优化设计，并得出了变截面的最优解。
In addition, based on the senior applied technique of ANSYS, the thesis makes the optimization design to the varying cross-section, and gains the optimal solution.
当然，我进入的磨坊并没有如此喧闹，我只是偶尔听到那些闲置的翼板上的横木做几下摆动罢了，一切都是如此寂静。
In my mill, of course, there is no such uproar; nothing but the occasional shaking of the cross-pieces of the idle sails. Everything is still;
如果这个被EADS(一个欧洲航空公司)出自赞助的原型成功通过测试，那么太阳能翼板就会在很多未来的卫星中使用。
If this prototype, which is paid for by EADS, a European aerospace company, proves successful, solar sails might be added to many future satellites.
在两端简支的边界条件下采用分离变量法求解偏微分方程，得到用级数表示的应力解，然后根据剪力滞系数的定义即可得到组合箱梁翼板的剪力滞系数。
Separation of variables is employed to solve the differential equation under the boundary condition of two ends of the girder being simply supported, and the solution of stress is…
采用残余应力和力学性能测定、化学成分分析、断口扫描及金相检验等方法对铁路货车用l - B型组合式制动梁撑杆翼板产生裂纹的原因进行了分析。
The integrated analysis of crack failure for L-B Composite Brake Beam Bar Flange Slab was made by means of SEM, microscope and chemical analysis.
在两端简支的边界条件下采用分离变量法求解偏微分方程 ，得到用级数表示的应力解 ，然后根据剪力滞系数的定义即可得到组合箱梁翼板的剪力滞系数。
On the basis of mathematical statistic, using the method of multiple regression analysis, the practical calculating formula of the shear lag coefficient in thin-walled curved box girders is derived.
德国站的比赛中引入了一种小巧但很有效的空气动力部件——一种新的后部绕流板，原本预期会在匈牙利站比赛中出现的附加的两片后抛翼板在主后翼的下方和后轮前方。
A small but effective aero change introduced in Germany - ahead of a new rear diffuser expected at the next round in Hungary - is this extra flip-up under the main one in front of the rear wheel.
德国站的比赛中引入了一种小巧但很有效的空气动力部件——一种新的后部绕流板，原本预期会在匈牙利站比赛中出现的附加的两片后抛翼板在主后翼的下方和后轮前方。
A small but effective aero change introduced in Germany - ahead of a new rear diffuser expected at the next round in Hungary - is this extra flip-up under the main one in front of the rear wheel.
应用推荐