优异的涂层与金属基体的结合力。
涂层与基体之间结合力为15N左右。
The adhesive force between the coating layer and matrix is about 15N.
测定了锡镀层的孔隙率、可焊性和结合力。
Deposit properties such as porosity, solderability and adhesion were tested.
结合力实验也表明镀层与基体具有良好的结合力。
The adhesion between the composite coating and the matrix was fine.
讨论了真空蒸镀镀膜的形成和镀膜与基体的结合力。
Formation of vacuum evaporation coatings and bondability of the coating to the substrates were discussed.
基材与胶层结合力大，在存放或施工过程中不存在脱胶现象。
Bonding force of substrate and adhesive layer is large. No adhesive failure occurs during storage and construction.
采用钛铝-钼过渡层，金刚石膜和铜衬底间的结合力大大提高。
Results showed that adhesion between film and copper substrate could be greatly improved using such interlayers.
从附着功的角度对金属与陶瓷薄膜间的结合力进行了初步的探讨。
Bonding forces between metals and ceramics films were studied from the viewpoint of adhesion work.
通过各种测量，给出了吸收系数、电阻率、应力、硬度和结合力。
We measured the optical absorption, resistivity, film stress, hardness and cohesive force.
我们两人间的结合力是牢不可破的。我将在你身旁，不要再哭了。
This bond between us can't be broken. I will be here, don't you cry.
处理后的纤维表面粗糙度增加，提高了纸页成形中纤维间的结合力。
The surface roughness increases after treatment, which can improve the physical bond between the fibers.
测定了它们的冷压生坯密度、模拟生坯强度以及高频钎焊的结合力矩；
Green-pressing density, simulated green-pressing strength and bonding momental of high frequency brazing were assayed.
研究结果表明选择带电入池，无冲击电流方式时，可增强银镀层的结合力。
The result showed that the mode of sample entering electroplating bath with electrification and without impact current could made the adhesion harder.
简要概述了界面结合力的类型以及木材胶接操作过程中胶合强度的形成过程。
The type of interfacial binding force was discussed in this paper, and formation process of bonding strength during wood gluing operation was also discussed.
为什么电子比质子或中子活动更大？这是因为电子质量轻，结合力弱的缘故。
Why are electrons more mobile than protons or neutrons? It is BE cause they have lighter mass and less firm binding.
据此推测胰岛素受体结合力的降低可能是NIDDM胰岛素抗性的主要原因。
It is speculated that the decrease of insulin receptor may be the major cause of insulin resistance in NIDDM.
使用分子筛型镀液添加剂对提高镀层厚度、镀层结合力及其稳定性都非常有利。
Using molecular sieve type plating solution additive is very favorable to raising coat thickness, coat adhesion and its stability.
本工艺方法所制得的复合镀层具有分布均匀、结合力牢固、耐蚀性能好等优点。
The composite coating obtained with this process has such advantages as even distribution, high bonding strength, good corrosion resistance, etc.
实验结果表明：压电陶瓷表面化学镀的镀层具有优良的结合力和耐海水腐蚀性能。
Experimental results indicated that the film on PZT had a excellent adhesive strength and a seawater corrosion resistant property.
结果表明：该工艺镀液稳定、易于维护，所得镀层光亮、结合力好、抗变色能力强。
The results show that the process has strengths such as high bath stability, easy maintenance, bright deposit, good adhesion and antitarnishing ability.
经小槽电镀，获得外观致密均匀，似镜面光亮，结合力强，具有优良的可焊性镀层。
A uniform, compact, bright lustre, good adhosive and excellent solderable coating was obtained by the experimental electroplating.
研究了刷镀参数、底镀层种类和电源输出方式等对电刷镀铁层光洁镀与结合力的影响。
The effects of parameters, subbase deposit and power output on surface roughness and adhesion of the brush plated iron film were studied.
铝材灯饰零件对镀层光亮度和结合力有着比较高的要求，采用电镀加工方法废品率高。
The excellent brightness and cohesion of the plating layer are needed for aluminium lamp finishing parts.
利用片状锌粉、铝粉、铬酐及其它有机物配制的锌基涂料具有良好的结合力和耐蚀性。
Zinc basic coating, prepared with flake zinc powder, aluminum powder, chromic anhydride and some other organic compounds, possessed good combination force and corrosion resistance.
铝及铝合金化学氧化后涂漆，可大大提高基体与涂层的结合力，并增强铝材的抗蚀能力。
With chemical oxidizing and subsequently paint ing of aluminum and its alloy, adhesion of aluminum substrate with coatings coul d be greatly improved, as well as corrosion resistance.
研究了软熔处理温度与保温时间对锡镀层的镀层结合力、镀层表面形貌和孔隙率的影响。
The effects of temperature and retaining time in mild melt treatment on the bonding strength, surface morphology and porosity of tin coating are studied.
锡焊件、铅锡合金、锌压铸件、铍青铜、磷铜等合金在电镀前也常用预镀铜来改善结合力。
Tin welding parts and lead-tin alloy die casting, zinc, beryllium bronze, phosphorus copper alloy in electroplating copper with commonly used before also gets to improve adhesion.
与其它导电金属层相比，镀铜层具有应力小、机械强度高、塑料基体与镀层结合力好等特点。
Compared with other conductive metal layer, copper coating with small with stress, high mechanical strength, the plastics substrate and coating binding force is good wait for a characteristic.
与其它导电金属层相比，镀铜层具有应力小、机械强度高、塑料基体与镀层结合力好等特点。
Compared with other conductive metal layer, copper coating with small with stress, high mechanical strength, the plastics substrate and coating binding force is good wait for a characteristic.
应用推荐