经过多年的努力,材料储氧性能的抗老化性已经得到了较好的解决,但是高温对材料织构性能的破坏作用仍然很严重。
Now, the thermal stability of materials' oxygen storage capacity (OSC) has been improved greatly, but its textural properties, especially after being aged at high temperature, are still dissatisfying.
结果表明,较低的铁素体轧制温度和较高的铁素体区压下量时,IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。
The results showed that the if steel has better deep drawability, higher mechanical and texture strength and elongation if the hot rolling temperature was low with big reduction in ferrite region.
含有粗大的铁素体晶粒和残留的热轧织构,引起力学性能的各向异性,导致了抗拉强度和延伸率的降低。
Big ferrites and hot rolling texture are left behind in particle structures, Which leads the anisotropy of mechanics, so the tensile strength and elongation rate reduce.
讨论了钢板的织构类型及其均匀性对硅钢电磁性能及冲压性能的影响。
The influences of texture typos and their homogeneity on the properties of magnetic and press were discussed.
if钢的冷轧压下率分配对深冲性能有重要的影响,是由于冷轧过程的压下率对(111)织构的形成有影响。
The reduction partition has effect important in two-time cold rolling on Drawability of IF steel, because reduction has effect in cold rolling on {111} texture.
采用基于N - S方程的CFD方法,研究矩形、斜面台阶形、圆弧形、三角形、多圆弧形以及正弦形织构表面的动压润滑性能。
The hydrodynamic lubrication performance of rectangle, inclined plane, circular-arc, triangle, multi-arc and sine surface texture was researched with CFD method based on N-S equation.
通过轧制温度、轧制方式实验,以及织构和力学性能分析,研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。
The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.
研究了一种双取向硅钢不同方向的磁感(B8)及其与织构和磁晶各向异性能(EK)之间的关系。
The relationship between the different direction magnetic properties (B8), texture and the magneto-crystalline anisotropy energy (EK) of a doubly oriented Si steel has been investigated.
用X射线衍射技术(XRD)研究了PLT薄膜结晶性能,结果表明PLT薄膜为(111)择优取向钙钛矿相织构。
X-ray Diffraction(XRD)was applied to study crystalline properties of PLT films, and XRD patterns of PLT thin films show that there appeared(111)preferred-oriented tetragonal perovskite phase.
通过拉伸、宏观织构、FLD等实验,测试并比较了SPCD和SPCE冷轧板的成形性能。
The forming properties of SPCD and SPCE cold-rolled sheet are tested and compared through experiments such as drawing, macrostructure and FLD.
通过铁素体区热轧工艺生产elc钢的工业试验,研究了一种ELC钢的热轧组织、织构及性能。
The hot rolled steel microstructure, texture and properties of an ELC steel was conducted to study through ELC steel hot rolled in ferrite region process industrial production experiment.
结果表明,较低的铁素体轧制温度和较高的铁素体区压下量时,IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。
The relationship of deep-drawing property and rolling parameters of IF steel was researched by the testing of ferritic rolling and annealing.
本文综述了钛合金织构与力学性能之关系诸方面研究。
In this paper, a brief review on the relationship between the mechanical properties and textures in titanium alloys was made.
由于应变和织构的存在,塑性变形对TNTZO合金腐蚀性能的影响比较复杂。
Due to the existence of the strain and deformation texture, the effect of deformation on corrosion property of the TNTZO alloy is not monotonic.
偏离轧制方向不同角度处的磁性能大小取决于织构类型、强度及分布状态;
Magnetic properties of different directions in relation to rolling direction depend on type and distribution state of texture component.
列举织构对钛合金弹性、屈服、拉伸强度、断裂及疲劳等各种性能的影响;讨论了有关钛合金织构强化实际应用的一些问题。
The effects of textures on the elastic modulus, yield and tensile strength, fracture and fatigue properties as well as some problems on the application of texture strengthening were discussed.
对冷轧及退火后无取向硅钢织构及磁性能的变化进行研究。
The variation of the texture and magnetic properties of non-oriented silicon steel after being cold-rolled and annealed is studied.
通过铁素体区热轧工艺生产ELC钢的工业试验,研究了一种ELC钢的热轧组织,织构及性能。
The hot rolled microstructure, texture and properties of an ELC steel hot rolled in ferrite region, cold rolled and annealed were studied.
通过铁素体区热轧工艺生产ELC钢的工业试验,研究了一种ELC钢的热轧组织,织构及性能。
The hot rolled microstructure, texture and properties of an ELC steel hot rolled in ferrite region, cold rolled and annealed were studied.
应用推荐