重熔层组织致密，未发现未熔会及夹渣等冶金缺陷。
The microstructure of coat was compaction, and any metallurgical defects, su…
快速冷却的合金由于表面组织致密和缺陷少，耐蚀性较高。
The corrosion resistance of rapid-cooling alloys is high for their compact structure and little defects.
高速离心铸造，组织致密，无砂眼、夹渣，表面光滑、壁厚均匀。
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
实验表明：激光合金化层组织致密，晶粒细化，与基体呈冶金结合。
The results show that the microstructure of laser alloying zone is compact, grain is fine, and has metallurgical bonding with matrix.
高速电弧喷涂镍铝涂层结合强度高，涂层组织致密，是优良的打底涂层。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
通过显微组织、X射线衍射分析表明，所得堆焊层组织致密、结合强度高。
The analysis of microstructure and XRD indicates that the bead welding is of good densification and has high combination strength.
结果表明：所制得熔覆层组织致密、无裂纹，与基体形成了良好的冶金结合。
The results show that the cladding layer has compact and flawless microstructure and has been metallurgically integrated with pure copper substrate.
生产实践表明，采用该铸造工艺，生产的铸件组织致密，符合生产技术要求。
The productive practice indicates that the castings' microstructure produced by the technology is compact and the quality of the castings can meet the technical requirements.
结果表明，采用合适的冷压焊工艺可以实现锌铝合金的对接，焊缝组织致密。
Results show that cold pressure welding is suitable for zinc alloy. The microstructure of welding seam is compact.
结果表明，堆焊技术是可以用于快速成型的，并可以得到组织致密的金属零件。
It is found that surfacing welding shaping can be applied in rapid prototyping, and consequently metal components with compact texture can be obtained.
零件组织致密， 成分均匀，力学性能较铸态有所提高，能满足直接使用的性能要求。
The obtained microstructure is fully dense and evenly distributed. The mechanical properties are somewhat higher than that for casting, and meet the requirement for real usage.
电熔镁砂结晶体大、组织致密、高温性能好、抗渣性强，是生产耐火砖和散状料的优质原料。
It is an ideal raw material for producing firebrick and monolithic materials, with the characteristic of big crystal, compact texture, high temperature property and high slag resistance.
电熔镁砂结晶体大、组织致密、高温性能好、抗渣性强，是生产镁碳砖和铝镁碳砖的优质原料。
It is an ideal raw material for producing magnesia carbon brick, with the characteristic of big crystal, compact texture, high temperature property and high slag resistance.
结果表明：在给定实验条件下，渗硼层组织致密，硼化物呈针齿状楔入基体，与基体结合牢固；
The results show that, in the given conditions, the microstructure of boronizing layer is dense, boride wedged base in the shape of spider, which combines with base firmly;
发现，采用消失模铸造耐磨槽铸件，尺寸精度高，表面质量好，组织致密，使用寿命可提高50%以上。
It was found that the wear-resistant trough cast with EPC process was of high dimension accuracy, good surface quality, dense structure, and its working life could be increased by more than50%.
结果表明，电冶钢结合金组织致密、强度高、韧性好，尤其是具有高的抗磨损性能，用其所制的钢丝轧辊成本低、使用寿命高。
The results show that this material has many advantages, such as dense microstructure, high strength, toughness and wearing resistance. The roll from this material has a low cost and long life time.
致密区域表明了组织中腺体比脂肪多，这会造成更难识别出，或从正常腺体组织中分辨出钙化物质和团状物。
Dense areas indicate tissue that is more glandular than fatty, which can make calcifications and masses more difficult to identify or differentiate from normal glandular tissue.
癌症之类的更致密的组织会显示为光亮的和白色的，反之脂肪之类没那么致密的组织就显示成黑暗的或灰的。
Denser tissue, such as cancer, appears bright and white, whereas less dense tissue, such as fat, appears dark or gray.
右边是致密的粉红色结缔组织硬脑膜。
在供体手术中，供体肝组织活检显示：门脉区域扩张伴淋巴细胞浸润以及胆管周围致密向心性纤维化。
In the donor operation, the donor liver biopsy revealed expansion of the portal zone with lymphocytic infiltration and dense concentric fibrosis developed around a bile duct.
与其他烧结方法相比，激光烧结制备的纳米材料晶粒尺寸更为细小，组织结构更为致密。
Compared with other sintering methods, the nano-ceramic materials with the finer grain size and the higher density can be obtained by SLS technology.
结果表明，在一定条件下，激光熔凝处理可进一步提高纯铁渗稀土层组织的致密性与均匀性，显著提高稀土渗层的耐蚀性。
The results show that the laser surface melting treatment improves greatly the homogenization, compaction and the corrosion resistance of rare earth permeating layer under the condition of test.
中间层凝固和轴向凝固的出现，不利于获得致密的轧辊组织，促进轧辊产生裂纹。
The appearance of mesosphere solidification and shaft direction solidification was infaust to obtain compact roll structures, that accelerated the roll to produce crack.
碳化硅作为铸铁件激冷材料，可以使铸件获得致密而耐磨的组织。
Carbofrax used as the chill material for casting may make casting obtain compact and wear-resistant structure.
所成型金属零件的组织均匀、致密，没有缺陷。
The as-formed metal parts are fully dense, homogenous and free of defects.
结果：滑膜下致密纤维组织中弥漫浸润的巨噬细胞和异物巨细胞内有大量磨屑。
Results: in the dense fibrous connective tissues, there are infiltration of macrophages and foreign-body giant cells with plenty of wear debris.
结果表明当年生枝条茎段组织培养春天比秋天成活率高，绿色致密的愈伤组织能够成苗。
The results showed that shoot segment in vitro survive rate is larger in spring than in autumn, and green dense callus could form plantlet.
结果表明当年生枝条茎段组织培养春天比秋天成活率高，绿色致密的愈伤组织能够成苗。
The results showed that shoot segment in vitro survive rate is larger in spring than in autumn, and green dense callus could form plantlet.
应用推荐