运用工程热力学的理论计算组成物料的各气体、汽体、液体于绝热过程中对外所作的膨胀功、爆沸功。
According to the engineering thermodynamic theory, the inflating work and ebulliency work exerted by the materials composed of liquid, vapour and gas during the adiabatic process are calculated.
选择两组不同密度组成的物料进行了不同时间的跳汰分层试验。
Experiment is carried out on stratification of material with different density components in jigging process at different time.
在二维流化床试验装置上,对由大颗粒物料组成的密相鼓泡流态化床进行了试验研究。
On the equipment of two dimensional fluidized bed, we were primarily engaged in experimental research on coarse particle dense bubbling fluidized bed.
工业工程是对人员、物料、设备、能源和信息所组成的集成系统,进行设计、改善和设置的一门学科。
The branch of engineering concerned with the design, improvement, and installation of integrated systems of people, material, information, equipment, and energy.
金属注射成形是一种用来制造形状复杂金属零部件的新型近净成形技术,其物料组成为金属粉末和粘结剂。
Metal injection molding is a new net shape technology applied to produce complex-shaped metal parts, in which materials are metal powder and binder.
分析了不同物料、粒级组成,孔隙率等因素对压缩性能的影响。
The affect factors such as different filling materials, composition of size and porosity inferred with compression property also had been analyzed.
本机由加料机构及粉碎机构组成。结构简单,清洗方便,与物料接触部分全部采用不锈钢制造。
The machine is made up of feeding material part and crush part. Its configuration is very briefness, all the part which contact the material are made of stainless steel.
即内层迭代是将物料平衡方程和相平衡方程联立,化为三对角矩阵形式,由之解出各板液相组成后,通过泡点计算法求定各板新的温度和相平衡常数。
The internal iterative calculation is to correlate the equations of mass and phase equilibrium into a triple diagonal matrix from which the liquid compositions can be found out.
浮选试验及生产过程中,人们往往过多强调入选物料的细度,而忽视了入选物料的粒度组成对浮选过程的影响。
In flotation test and production it is often the case that, the fineness of milling material is overstressed while the effect of its particle size composition on the flotation neglected.
讨论了一种小剂量粉末状物料装瓶机构的设计原理、组成结构。
The design principle and main structure of a bottle filling device for small quantity powdery material are discussed.
花纹输送带是由带体和花纹部分组成,由于运输的物料不同和输送机倾角大小,要求花纹的开头和高低深浅也不同。
Patterned conveyor belt is composed of belt carcass and pattern. Pattern shape and height (depth) may be different because of different conveyed material and gradient of conveyor.
基于炭催化剂特性、原料气组成和重整转化反应器的尺寸参数,建立了重整反应器体系的物料平衡和热平衡方程;
Based on the properties of carbonaceous catalyst, composition of feed gas and the size parameters of reforming reactor, heat and material balance of reactor were established.
介绍了基于计算机的农业物料碰撞特性数据采集系统的组成和测控软件的设计要点。
An automated data acquisition system for the impact characteristics experiments of agricultural materials was developed.
机加工车间由机床和物料传送系统组成,车间生产是一个将制造资源转化为产品的生产过程。
The machine shop is composed of the machine tools and the material handling systems, the machine shop works as transfer the raw material to the product.
均化矿石组成,均匀加入拜耳法赤泥,使物料组份在合理的范围内波动,有利于获得高标准的合格料浆。
Homogenization of components of ores and homogeneous adding of red mud of bayer process can confine the surge of material components within a rational range, thus high qu...
物料输送系统和通风除尘系统是小麦加工工程中的重要组成部分。
Material conveying system, and aeration and dedusting system are also the main parts of wheat processing.
该螺杆由芯轴和几个空心螺杆段组成,对于不同的物料,只需更换其中某些空心螺杆段即可。
The screw consists of core spindle and several hollow screw segments which can be replaced easily for different materials.
分选系统是光电分选机的重要组成部分,它的任务是利用光电技术将物料中的次品分类检出并剔除。
As an important portion of the photoelectric sorter, sorting system is a way to sort and remove infested objects by using photoelectrical technology.
铝土矿中的含硅矿物在磨矿过程中极易泥化,产生大量的次生矿泥,严重影响了反浮选脱硅过程,入选物料粒度组成的影响就更不容忽视。
The silicon containing minerals in bauxite are very apt to be slimed so as to produce a large amount of secondary slime which can seriously affect the silicon removal in reverse flotation.
它是由几个量料辊子和其上面的相应物料箱及其下面的分流板和集流板组成的。
It consists of material weighing rollers, material cases over the rollers, lower dividing plates and flow collecting plates.
从抗压强度和安定性两方面测试了中温处理铁尾矿、钢渣及油页岩渣后物料的胶凝性能,利用XRD对中温处理后物料的物相组成进行了分析。
The cementing performance of such wastes as iron mine tailings, steel slag and oil shale residue was tested with XRD at middle temperature in the perspective of compressive strength and stability.
NBE实芯管式螺旋输送机是在一个散装物料输送系统设计中的关键组成部分。
NBE solid core screw conveyors are a critical component in the design of a bulk material transfer system.
在制造企业中,按物料需求的采购与库存管理是日常经营管理中必不可少的组成部分。
In manufacturing enterprises, according to the demand of materials purchasing and inventory management is an indispensable part of all manufacturing enterprise's daily life.
设备由箱体、热风循环系统、旋转式物料盘、刮料装置、传动系统等组成。
It is composed of cabinet, hot air recycle system, rotary, and scraper device and transmission system.
阐述全能纸张烘道系统主要组成,根据烘干物料的不同,选择红外线干燥或紫外线固化,烘干后经运风降温冷却,提高纸张的干燥效果。
According to the different papers, infrared drying or UV curing was selected, and then the cooling systems made the paper cool to improve the drying effect.
气化过程的物料衡算可以用来预测气化煤气的基本组成。
高压静电分选腔是电选机的重要组成部分,对矿物及物料的分选起着决定性的作用。
As an important part of the tribo electrostatic separator, the high-voltage electrostatic field plays a key role in the mineral and the material processing.
翻浆造纸工厂物料平衡的测定和计算是技术管理的一个重要组成部分。
The measurement and calculation of material balance in pulp and paper mill is one of the important parts of technical management.
花纹输送带是由基带和花纹两部分组成,由于运送物料不同和输送倾角大小不同,要求花纹形状和高度也不同。
Patterned conveyor belt is a belt and tread base of two parts, as delivery and distribution of materials with different Angle sizes, shapes and height requirements are also different patterns.
花纹输送带是由基带和花纹两部分组成,由于运送物料不同和输送倾角大小不同,要求花纹形状和高度也不同。
Patterned conveyor belt is a belt and tread base of two parts, as delivery and distribution of materials with different Angle sizes, shapes and height requirements are also different patterns.
应用推荐