本实验采用湿法纺丝工艺纺制出了弹性纤维。
The elastic polyurethane fibers (spandex) were prepared by wet spinning.
探讨了纺丝工艺对纤维成形及产品力学性能的影响。
The influence of TCS process conditions on the fiber formation and mechanical properties was discussed.
重点讨论了纺丝工艺及后加工工艺等对该纤维质量的影响。
The influence of spinning process and after processing on the fiber quality was discussed emphatically.
根据所建立的模型,模拟了纺丝工艺条件对纤维异形度的影响。
The effect of spinning technology conditions on fiber shaped degree was simulated by using the established model.
文中对复合纺丝法制备聚合物瓣状光纤的纺丝工艺进行了研究。
The spinning technology of fabricating polymer segmented cladding fiber by bicomponent spinning is studied in this paper.
连续纺丝工艺是黏胶纤维行业中先进的纺丝技术,对水质要求很高。
Continuous spinning technique, the advance technique in viscose fibre production field, has higher demand on water quality.
找到了HSPET的最佳纺丝工艺,且能够达到控制其收缩率的目的。
The optimal spinning process of HSPET, which can be used to control the fiber shrinkage, has been found.
研究了铸膜液的构成、纺丝工艺条件和后处理方法对膜结构和性能影响。
The effect of dope composition, spinning condition and post-treatment on structure and property of packed hollow fiber membranes were investigated.
通过改进纺丝工艺以及纺丝后处理方法可以改善人造蜘蛛丝的力学性能。
Artificial spider silk with mechanical properties similar to the nature spider silk should be able to be produced by varying the spinning parameters and post-process.
本文对多功能共聚酯在常规纺丝过程中的树酯质量和纺丝工艺进行了研究。
This article studies the process parameters of multifunctional Polymer-blend Polyester resin and quality in the process of conventional spinning.
并对凝固浴浓度和温度、挤出速率、芯液流量等纺丝工艺条件进行了探讨。
Several spinning procedure conditions were discussed, such as coagulation bath concentration, temperature, extruding rate and core layer liquid flow rate etc.
该膜制备方法采用本发明所述的配方和优化的干-湿法纺丝工艺进行纺丝。
The method for preparing the membrane adopts the formula in the invention and an optimized dry-wet spinning process for spinning.
通过选择纺丝工艺制得收缩差大于10%、异纤度比大于2的三异共纺长丝。
Depending on the selected process, the multi-filament can have a contraction and titre deviation respectively more than 10% and 2.
从熔体输送和纺丝工艺条件分析、探讨影响PET直纺FDY满卷率的因素。
The factors affecting full-package rate of direct-spun PET FDY were analyzed and discussed from the aspects of melt transfer and process conditions.
对复合PET/EVOH吸湿纤维进行纺丝实验,得到最佳的纺丝工艺参数。
PET/EVOH sheath-core fiber was prepared and the optimal spinning parameters were obtained.
研究了香料的选择、香母粒的制作、共混纺丝工艺及芳香聚丙烯的结构和性能。
The selection of spices, manufacture of spice matrix , technology of blending spinning, structures and properties of the fiber are discussed.
本发明还包括止血纤维的气体牵伸法纺丝工艺,该工艺流程简单、生产效率高。
Said invention also includes the air-drawing process spinning technology for styptic fibre.
介绍了尼龙66纺丝工艺对工业丝物理性能如线密度、强力、定负荷伸长率的影响。
The effects of spinning process on linear density, tenacity and elongation of Nylon 66 technical yarn were described.
简述了生产聚氨酯弹性纤维的原料、制备工艺及纺丝工艺,重点介绍了其技术进展。
The raw materials, manufacturing technology, spinning process of polyurethane elastic fiber are introduced briefly. Its technique progress is summarized emphatically.
介绍了铝氧化反应结合技术与干湿法纺丝工艺相结合制备氧化铝中空纤维膜的方法。
The preparation method of alumina hollow fiber membrane by reaction bonding of aluminum oxide (RBAO) technique combined with dry wet spinning process was introduced in this paper.
简述了生产聚氨酯弹性纤维的原料、制备工艺及纺丝工艺,重点介绍了其技术进展。
The raw materials, manufacturing technology, spinning process of polyurethane elastic fiber are introduced briefly.
凝胶浴的浓度和温度、纺丝工艺等都会影响共混体系的相容性并改变膜的结构和性能。
The concentration and temperature of the coagulation bath and spinning conditions all have a great effect on structures and properties of PVDF/PVC hollow fiber membranes.
利用电子探针、扫描电镜研究了聚丙烯腈在湿法纺丝工艺中的横截面形貌与皮芯结构。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
用去酸水再生,可减少污染,降低纺丝工艺排水酸度,具有明显的社会效益和经济效益。
Using the acid washing water can reduce pollution and the acidity of the water being drained off in fibre spinning technology. It has obvious economic benefit and social benefit.
介绍了复合纤维的纺丝工艺以及一些特殊的后处理方法,对复合纤维的应用进行了综述。
The spinning process and some special post-treatment methods of composite fiber are introduced. The application of composite fiber in various fields is summarized.
介绍了新的纺丝工艺生产的纤维的加工性能,并对常规纤维和新型纤维的特征进行了比较。
This paper reports the fiber properties produced new spinning technology and compares the characteristics of standard fiber with new fiber.
通过对阳离子可染切片(CDP)结构与性能的分析,提出了纺丝工艺设定与过程控制的方法。
Through the analysis on the structure and characteristic of CDP, the method of process design and control is put forward.
介绍了聚乳酸纤维的纺丝方法、聚乳酸熔融纺丝工艺流程及目前国内外聚乳酸纤维的生产、开发情况。
It described the spinning method including solution-spinning and melt-spinning and process of melt-spinning of polylactide and companies manufacturing polylactide fiber in the world.
介绍了聚乳酸纤维的纺丝方法、聚乳酸熔融纺丝工艺流程及目前国内外聚乳酸纤维的生产、开发情况。
It described the spinning method including solution-spinning and melt-spinning and process of melt-spinning of polylactide and companies manufacturing polylactide fiber in the world.
应用推荐