在调度约束条件分析和一些基本假设的基础上，本文建立了多卫星初始调度约束模型，并给出了模型求解的贪婪算法。
A constraint satisfaction scheduling model for the initial scheduling problem and a greedy algorithm for it are given based on the constraints analysis and some basic hypothesis.
通过分析系统必须满足的需求和约束条件，我们可以很方便地开发一些模型去呈现系统。
We facilitate the development of models that represent systems based on the analysis of requirements and constraints that the system must fulfill.
本系列文章的目的是帮助您理解特性、拓扑事项、以及约束条件，以便您能够创建和测试Web应用程序，并且分析其性能报告。
The goal of this series is to help you understand the features, topological considerations, and constraints so that you can create and test Web applications and analyze the performance reports.
文章分别分析了路内停车需求影响因素和路内停车供给约束条件，并把这些因素进行了量化。
This paper analyzes the influence factors of curb parking demand and the constrained factors of parking supply, and these factors are all measured.
计算考虑了积分阶次和约束条件对振型的影响，并与实验数值进行了比较，验证了理论分析的正确性。
Considering the integration order and the effect of constraint condition to the model shape, comparing model shape with experimental data, the analysis about theory is right.
通过对关节式移动机器人越障过程运动学和动力学分析，得出控制移动机器人越障时保证动态稳定性的约束条件。
Analyzed kinematics and dynamics of the obstacle negotiations for an articulated mobile robot a restriction condition to guarantee dynamic stability when it gets over the obstacles.
为了满足平顺性，建立了以冲击度为约束条件的起步与换挡控制规律，并对试验结果进行了分析。
In order to meet ride comfort, establish the start and shift control regularity that takes shock extent as constraint condition, and analyze the test results.
基于支承法兰盘的结构特征，通过目标函数的建立、设计变量的选取以及约束条件的确定建立了优化设计的有限元模型，并对法兰盘进行了静力分析。
Based on the structural characteristics of bearing flange, the optimization model is established according to the objective function, design variables and constraints, and make a static analysis.
文中通过对拍门运动的系统分析，建立了带有约束条件和目标函数的数学模型。
Based on a systematic analysis of the movement of the flap valve, a mathematical model with constraint conditions and objective functions is established.
本文通过分析经济信息的质量特征，探讨了股份经济对经济信息的质量要求，并提出了约束条件。
The paper discusses joint stock economys quality requirements for economic information by analysing economic informations quality characteristics, and put forward restriction conditions.
根据该模块的几何特点，分析了模块的对接过程和相邻两模块对接的几何约束关系，给出了当存在几何及控制不确定性时，完成对接最基本的几何约束条件。
The docking process of the module was analyzed. When the uncertainty about control and geometry occurs, the basic geometric condition is analyzed to finish the docking action.
本文介绍了马赛克图像分析的粗筛选原理，并通过实验表明该方法可以应用于约束条件下的人脸检测问题。
The experiment shows that the mosaic image analysis can be used for face detection under some constrained conditions.
文中对各种对精度影响因素进行了定量分析，并给出了应用时的约束条件。
This paper makes a quantitative analysis on all kinds of factors that influence the accuracy and gives the applied restrictions.
通过算例对比，计算分析了三种不同约束条件下结构中的温度应力，得到在地铁车站设计中应合理设置伸缩缝和沉降缝的结论。
By comparing the calculations under three different restraint conditions for thermal stress fields, it is concluded that expansion joints and settlement joints are to be set up.
约束条件下的统计推断巳成为统计分析中一个重要的研究领域，而保序回归的研究又是其中之关键。
Statistical inference under order restrictions is an important area of statistical analysis and isotonic regression theory plays a key role in this field.
同时，分析了双向组合板在不同约束条件和不同跨度比下的受力性能。
At the same time, performance of two-way composite slab with different boundary conditions and different span-ratio are analyzed.
对约束条件以及结构单元参数进行了分析，得到了龙骨结构在重力载荷作用下的应力和变形。
By dealing with constraint condition and cell parameter, results of elements' stress and nodal displacement of the keel were obtained under gravity load condition.
本文闸述了现有建筑物抗震决策的目标和约束条件、决策分析的基础研究和备选方案，探讨了抗震加固的总经济损益。
Goal of decision making and constraint condition for aseismic analysis of existing buildings and basis of analysis of decision making are illustrated in this paper.
文章在分析水夹套式氯化氢合成炉腐蚀机理基础上提出防腐壁温约束条件的合成炉换热面积设计方法。
This paper provides synthesizer's heat exchanger area design method of additive mothballing wall temperature bondage condition in analysed corrosion mechanism of hydrogen chloride synthesizer.
目的：探讨上颌骨三维有限元分析中较合理的边界约束条件的设定。
Objective: to discuss the rational boundary constraint design in finite element analysis of the whole edentulous maxillary and cranial skeleton.
在系统各单元为串联结构时，在综合考虑价格、质量和体积等约束条件下，对可靠性分配进行了分析。
When each unit of system is series structure, reliability distribution is analyzed under the conditions that cost is taken into account and mass and volume are constrained.
本文在回顾国内外有关区域主导产业理论的基础上，对区域主导产业的选择基准、选择原则、约束条件等进行了分析。
Based on the brief reviewing of theories related to regional leading industry, the essay analyzed the choosing criteria, choosing principles, constraints conditions of the regional leading industry.
以矩阵分析理论为基础，讨论了影响测量方程求解的因素，并提出了方法中重要部件手握式靶标上特征点分布的基本约束条件。
Based on the matrix analysis, the influential factors on the model solving are discussed and the restriction conditions to the distribution of the known points on the probe are proposed.
该文在分析光流模型约束条件的基础上，提出了一种鲁棒的多分辨率光流估计方法，并对光流应用于目标检测的一些实际问题进行了探讨。
Based on the detail analysis of optical flow model, a robust multi-resolution estimation approach of optical flow is proposed, and some practical problems are also discussed on target detection.
按照连续变量平衡提高各级串联环节的可靠性，分析得出了在约束条件下各个环节的并联个数的计算公式和简化计算思路。
And according to continuous variables balance raise every links reliability, the calculating formula and simplified method of every link parallel Numbers under constrain conditions are analyzed.
对建模过程中有关目标函数确定、变量分析、约束条件等进行了讨论。
Confirmation of objective functions, variables analysis and constraint conditions during modeling were studied.
考虑到约束条件的模糊性，应用遗传算法和模糊集原理对钢桁架结构进行了优化分析。
This paper optimizes the steel truss structures by taking into account the fuzziness of constraints and employing GA and the fuzzy set theory.
首先以双目平行立体视觉系统为例，分析了立体匹配基本原理及常用的约束条件。
Firstly, analyzed the rationale and constraints used in a binocular parallel stereo vision system.
给出了特定装药条件下PBXN-5的爆压值，定性分析了装药直径及约束条件对爆压的影响。
The detonation pressure of PBXN-5 is supplied, qualitatively analyzes the effect of charge diameter and constraint condition of PBXN-5 on detonation pressure.
用优化设计方法进行滚珠丝杠传动的设计，对设计的目标函数及约束条件进行了分析讨论。
An optimization method has been used in the design of teh ball screw drive. The objective function and constraint conditions are discussed.
应用推荐