本文介绍了色谱柱切换系统控制软件的主要功能以及软件系统的设计。
The designing of chromatographic columns switch system control software and the main functions of this software are introduced in this paper.
本文讨论了微机pc b数控钻床系统控制软件的设计目标、思想、原理和方法。
In this paper, we discuss the target, the idea, the principle and the way for the design of control software of the pcb-nc-driller system controlled by microcomputer.
采用梯形图编制了系统控制软件,程序能够对系统故障情况进行自动判断与处理。
The system control software is written by ladder diagram and system fault states can be judged and treated voluntarily.
该型含系统控制软件、计算机接口,可在计算机上全程记录和显示测定过程和结果。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
本文主要研究了光谱成像系统控制软件和数据处理与特征光谱曲线拟合软件的设计。
This thesis researches spectral imaging system's control software, data processing software and characteristics spectral curve fitting software design.
同时,系统控制软件还中嵌了软件可编程技术,从而简化了操作过程,明显减轻了劳动强度。
Also the software programmable technique is embedded in the system control software, which can simplify the operation procedure and relieve the work labor greatly.
分析了可编程序控制器系统控制软件及其特点,并对一些编程中的要点及注意事项作出了经验上的总结。
Analyzed PLC system control software and it's characteristics, and make experience summarize to programming main point and notice proceeding.
运用时分多任务程序结构构建系统控制软件,解决外设响应慢对实时系统地制约,从而提高程序执行效率。
Time-sharing multitask that solve slow response reaction of peripheral has powerful utilities to build embedded software system, advance efficiency for program.
完成了系统控制软件和FPGA控制逻辑设计,实现了幅频和相频测试,参数存储,Q值计算等数据处理功能。
It completes the system control software and FPGA control logic design, and achieves the data-processing function of amplitude and phase-frequency testing, parameter storage, calculation of Q-value.
对下位机子站控制系统和运行于上位机的系统控制软件进行了多方面的测试,并分析测试结果,提出了改进的方向。
The author did a number of tests of the control system and the software run by the principal machine in many ways, analyzed the results of the tests, and gave the direction for improvement.
第四章研制了计算机高速数控雕铣系统控制软件,包括控制软件结构、主要管理功能、刀具补偿功能、插补功能的分析和实现。
System software is designed and programmed in chapter 4, including the analyses and researches on software structure, module of vital manage, module of tool compensation and module of interpolation.
公司自主研发制造了DLP大屏幕、液晶大屏幕、等离子拼接大屏幕、小间距LED大屏幕、图像处理器、矩阵切换器、系统控制软件等系列产品并获的各项专利和软件著作权。
The company developed the manufacturing of DLP, LCD, Multi-screenprocessor, matrix switchers, system control software products and obtained the patents and software copyrights.
在分析系统控制方案的基础上,阐述了系统的硬件和软件设计方法,以及系统实现的功能和效益。
Bases on analyzing the control schemes of system, the design methods of software and hardware, as well as the function and benefit accomplished by the system are described.
同时给出了具体的机械设计、硬件及软件实现方法。实验结果表明该系统控制稳定、灵敏。
The experimental results indicate that this control system is steady and sensitive. The structural design and the realization of hardware and software are also given in detail.
介绍了计算机系统配置、系统硬件配置及软件设计,还详细介绍了系统控制效果。
The configuration of the computer system, system hardware and software design are presented. Also, the control results of the system are introduced in detail.
为此设计了硬件电路及控制软件,分析了系统控制精度,具有实用价值,并能够进行进一步开发。
The hardware circuit and controlling software are designed and the control accuracy is analysed in the paper. The system is valuable and can be used to develop new devices.
为了完成由计算机系统控制的全自动化膜片钳,实现整个实验过程的自动化,需要设计全自动膜片钳的软件系统。
To accomplish the automatic patch-clamp system controlled by computer system, to realize the automatization during experiment, the software system of automatic patch-clamp should be designed.
本文介绍了一种由8031单片机系统控制的程控的放大器的基本原理和硬件与软件设计思想。
This article introduces the basic principle of the programme control amplifier controlled by 8031 single chip microcomputer and the design thought of the system hardware and software.
文中将算法应用于转子实验台系统,通过实验教学软件来改变控制参数以比较系统控制性能的改善。
The algorithm is applied in the rotor test bed system and the all control parameter can be modified by the experiment teaching software to compare the control performance.
借鉴大系统控制论中广义模型化方法,建立了软件人情感控制的广义模型。
The method of generalized modeling in a large scale system was used for reference to construct a generalized model of SoftMan emotional control.
介绍PLC和变频器在圆锯变频进给控制系统中的应用,并分析系统控制方案及软件结构设计。
It recommends the application of PLC and frequency converter in Circular Saw feeding control system, analyzes the system control scheme and the structure design of software.
所设计的高性能的系统控制器硬件和实时变结构软件算法的实现,可以满足系统总体技术要求。
The designed high performance hardware and real time variable structure of software modules can meet the technical requirements of the system.
动态信号分析部分,由系统自检模块、系统控制模块、信号处理模块、报告自动生成模块、诊断与错误处理模块等软件模块组成。
Dynamic signal process system is made up of system self test module system control module the general signal process auto generate report module diagnose and error process module.
活动机头由步进电机拖动,数控系统控制,液晶触摸屏带门窗下料软件。
The moving head is dragged by stepper motor, controlled by CNC, LCD panel have a software for cutting.
介绍了最新研制的基于分布式控制系统(DCS)的火电站全CRT仿真培训装置中热力系统控制回路的可视化组态软件系统。
This paper presents the development of a visual configuration system used for a full CRT fossil power plant training simulator, which utilizes advanced distributed control system(DCS).
最后设计了气辅注射成型高精度实时注气控制系统软件,实验证明该控制系统控制性能良好,能达到令人满意的控制效果。
Then, a software with simple operation and complete function designed for the gas-injection control of GAIM is developed, whose control effect is proved to be perfect by experiments.
全伺服系统控制,全部自主编程,所有控制由软件实现,方便功能调整和技术升级,永远先进。
Full servo control system, all independent programming, all controlled by the software to facilitate the function of restructuring and technological upgrading, advanced.
全伺服系统控制,全部自主编程,所有控制由软件实现,方便功能调整和技术升级,永远先进。
Full servo control system, all independent programming, all controlled by the software to facilitate the function of restructuring and technological upgrading, advanced.
应用推荐