该配料控制器还配有标准的RS—485总线接口,较好地实现了配料控制系统的网络化设计。
The batch controller also has a standard interface of RS-485 bus, preferably achieved the network design of the batch control system.
对于多款微处理器本身没有USB的控制器,为了在嵌入式系统中使用USB设备,需要自行扩展usb接口。
When some microprocessors working with USB equipments in embedded systems without their own USB controller, their USB interface must be expanded.
单片机是将运算器、存储器、定时器、模数转换器和串行通信接口等集成在一个芯片上的小型计算机系统,它可以被嵌入到各种自动控制器和智能电子产品中。
Microcontroller is a small computer system that integrates ALU, memory, timer, ADC, UART, etc in one chip. it can be embedded into many kinds of controllers and intelligent electronic products.
方法:应用蓝牙模块、80c 552微控制器和RS- 232接口组成了医院导诊服务机器人的通讯系统。
Method: the communication system in the service robot side includes80C552micro-controller, bluetooth module and RS-232interface.
介绍基于UHCI的USB主机系统的硬件核心主机控制器接口规范,分析US B协议栈的硬件层实现。
The paper presents the interface specification of USB host controller based on UHCI, analyzes the implementation of hardware layer in USB stack.
文中介绍了CAN接口电路设计s、JA1000 CAN控制器的初始化流程和液压综合试验台控制系统的设计。
It introduces the interface circuit design of CAN, Procedure of initializing of SJA1000 CAN controller and the design of hydraulic pressure colligation test-bed.
本文以内藏液晶显示控制器(T6963C)的液晶显示模块为例,介绍了其在DSP测控系统中与DSP芯片(TMS320C542)的软件和硬件接口形式。
The article takes the LCD module of T6963C controler with built-in LCD for example, presenting its software and hardware interface with DSP(TMS320C542) in DSP application.
介绍了液晶显示控制器在嵌入式系统设计中的地位和作用,液晶屏接口信号的定义及作用。
The status and function of the LCD controller in the embedded system, and the liquid crystal displayer's interface signal's definition and function are introduced.
接下来对本系统所用到的CAN总线的原理、CAN控制器和CAN高速收发器进行了详细的介绍,并给出了CAN总线接口的设计方案。
Then detailed representations for CAN-BUS principle, CAN controller, CAN high-speed transceiver, and design project for CAN-BUS interface were given.
该文在研究边界扫描体系结构和TAP接口控制器的基础上,在一个测试系统中,实现了基于JTAG规范的主ta P接口设计。
On the basis of research on the bound ary-scan architecture and TAP controller, the paper implements a design for a t ap interface based on JTAG specification in a test system.
控制器的系统软件设计分为人机接口程序和控制程序。
The software design of controller is divided into Man-machine interface program and control program.
最大限度地减少相对昂贵的组件(如微控制器、接口控制器、电流隔离器和晶体)可以显著降低系统的总体成本。
Minimizing the number of relatively costly components, such as microcontrollers, interface controllers, galvanic isolators, and crystals, can significantly reduce total system cost.
还介绍了其控制系统的架构和控制方式,给出了PLC与机器人控制器的接口方法。
The control frame and mode of this system and the interface between PLC and robot are introduced, too.
对基于4位嵌入式微控制器的计算器电路进行了综述,包括功能框图与工作原理、指令系统、内核硬件结构以及系统与外界接口等。
Summarization about calculator circuits based on 4 bit embeded system is given, include block diagram and work principle, the instruction system, the structure of MCU core and the I/O.
本课题研究在微控制器系统中,把嵌入式usb主机接口作为一个功能模块,实现了车载多媒体视音系统嵌入式usb主机的的实际应用。
This study applys embedded USB HOST interface as a module to the Microprocessor and realizes the practical application of embedded USB HOST to the auto-multimedia system.
为了组成高能物理实验中所使用的漂移室读出系统的测试系统,研制了一种CAMAC控制器,作为TRS-80微计算机与CAMAC机箱的接口。
In order to compose the test systems for drift chamber readout used to high energy physics exeper iments, a CAMAC controller has been designed.
将USB所具有的独特优点引入到以GPIB为标准的自动测试系统中,设计并开发了具有USB总线的GPIB接口控制器和性能较为完善的VISA函数库,介绍了所设计的GPIB控制器VISA标准函数的格式与功能。
The inimitable merits of USB are introduced into the GPIB automatic testing system and the GPIB controller with the USB bus and the VISA function lib is designed and developed.
本设计为SOPC系统中嵌入usb主机控制器提供了有效可行的实现方案,拓展了SOPC系统的外设接口,具有较高的应用价值。
This design provides feasible and effective implementations for embedding USB host controller in the SOPC system, expands the peripheral interfaces of SOPC system. It is of higher application value.
智能型控制器带有可通信接口,通过现场总线由计算机控制,实现供电系统的遥测、遥调、遥控和遥信功能。
The intelligent controller has the communication capable interface and is controlled by computer via fieldbus, therefore it is able to have function of remote me…
本文对存储系统的控制器、接口、链路等做了比较研究。
This paper conducts a comprehensive comparison study on controller, interfaces, linkage, etc.
系统的扩展和移植难度发现的PCI(外设组件接口)总线运动控制器或PC(可编程控制器)的手段。
Difficulty of system Extending and transplant are found by means of PCI (Peripheral Component Interface) bus motion controller or PC (Programmable controller).
本文阐述了可编程控制器控制系统中,通过ASCII模块,实现远程操作站与可编程控制器的连接,并开发了ASCII模块中的接口通讯程序。
This paper expounded that the long distance operating station connect to PLC control system with ASCII module, and edited the communication program stored in ASCII module.
本文阐述了可编程控制器控制系统中,通过ASCII模块,实现远程操作站与可编程控制器的连接,并开发了ASCII模块中的接口通讯程序。
This paper expounded that the long distance operating station connect to PLC control system with ASCII module, and edited the communication program stored in ASCII module.
应用推荐