在操作系统VSE中，用该操作系统支持的任何一种语言编写的，且已在系统子程序库中编目的一组源语句。
In VSE, a group of source statements written in any of the languages supported by VSE and cataloged in one of the system sublibraries.
介绍了汽车电器件试验系统的研制开发思路，以及PLC在汽车电器件试验系统中的应用，并给出了控制系统子程序的设计方案。
This paper introduces the development of testing system used for automobile electrical parts, application of PLC and offers a sub-programming design plan in control system.
首先，您的全局钩子程序可以很容易地拖慢整个系统，如果你不小心。
First of all, your global hook procedure can easily slow down the whole system if you are not careful.
在硬件设计的基础上，文中对系统软件设计中的检测主程序、A/D转换子程序、定时器A中断子程序和液晶显示子程序的设计进行了系统性介绍。
On the base of the hardware design, this paper introduces the main program, A/D convert subprogram, Timer A abruption subprogram and liquid crystal display subprogram of software systematic.
指出利用数控系统的子程序和参数编程功能可以完成一些特殊零件的加工。
This paper points out that the functions of subroutines and parametric programming of the nc system can complete machining of some special parts.
系统软件包括主程序、子程序、显示程序。
The system software consists of main program, subprogram and display program modules.
由于电脑的子程序出现问题，导致整个系统都瘫痪了。
A problem with the subprogram has paralyzed the entire system.
该系统由几何处理模块、工艺处理模块、后置处理模块和子程序库组成。
The system includes geometry processing module, manufacturing technology module and subroutine program library.
该子程序的开发扩展了数控系统的编程功能。
The development of the sub-program has expanded the programming function of CNC system.
该系统由一个知识库和三个子程序组成。
The system consists of a knowledge base and three subprograms.
整个软体是菜单式的，重点介绍了色品坐标和亮度测量的软体，包括标准输入、系统定标和测量子程序。
The interface of the sofyware is menu - styled. the components that deal with color and luminous density measurement, including standard input, system calibration, are emphasized.
该软件具有较强的适应能力，既可以进行整个系统的设计计算，又可以调用其中某子程序，进行单个子系统的计算。
This software can be not only used for the design calculation of full system, but also can be used for the calculation of single subfile system by calling the subprogram in it.
在软件设计中采用MSP430汇编语言，实行模块化设计，文中给出了软件系统设计总流程图和部分子程序流程图。
Uses the MSP430 assembly language in the software design, implemented the modular design, the paper gives the software system design flow chart and part of the subroutine flow chart.
该系统在几个6502汇编语言子程序的支持下，具有快速、灵活、多功能的特点。
This system is supported by several subroutines in 6502 assembly language, which is of high-speed, flexibility, multi-functions.
在SIEMENS数控系统功能的基础上，开发出了摆线凸轮加工子程序，该子程序使用等误差直线逼近来保证凸轮的精度。
On the basis of the functions of SIEMENS CNC system, the sub-program for cycloidal cam machining has been developed.
系统具有间隙补偿，子程序调用，图形显示，现场修改工艺参数等标准数控功能。
The CNC system used on the machine enables backlash compensation, subroutine call, graphic display, on-the spot change of machining data and the like standard CNC functions.
分析了系统软件的功能，采用模块化软件设计方法，设计了控制系统主程序、中断服务程序以及子程序。
After analysis the function of system software, main program, interrupt service program and subroutine were designed use modeling develop ways.
发现数据库的数据有错误后，系统自动对系统数据进行校验，并运行纠错子程序纠正数据错误。
When discovering data errors in the database, the system will check the system data automatically, and run rectifying subprogram to correct them.
全面介绍了采用模块化设计方法所设计的系统主程序及设定、预压、通电、中断、模糊控制、熔核尺寸预测子程序等系统软件。
The soft-wares of system main program adopting modularization designing method and subprogram of setting, prepressing, electrifying, interrupting and fuzzy control are generally introduced.
触发器可以设置为实时更新统计结果。系统通过调用带有统计触发器的子程序来执行实时更新动作。
Real-time update is done by calling a subprogram with the statistical trigger code as an argument.
然后阐述了控制器软件系统设计方案，并给出关键模块子程序流程图或算法描述。
Then the thesis states design decision on controller software system and the flow chart or the calculating description on sub-process of key module.
介绍HAGC软件包的编程方法、系统和各子程序，以及系统的网络配置等。
The programming method of HAGC software package, all the subroutines, as well as the network configuration of the system are introduced in the paper.
本文介绍一种窗口式交互程序系统的开发软件——PWP窗口处理子程序包。
This paper describes the development of window software in dialog system PWP window process package.
介绍了系统PLC主控制器I/O端口设计，系统硬件组成和系统软件中主程序及自动加工子程序设计；
The I/O design of PLC controller, the hardware configuration and the main routine and auto-machining subroutine of software program are presented.
本文给出了系统方案设计、各个部分电路原理及主要的子程序，从而完成了视频字符叠加与红外无线传输的系统。
The scheme design of the system, the circuit basis of each part and the key programs are described in this dissertation, the whole character-overlapping and wireless transmission system is fulfilled.
并阐述了该系统软件的关键部分：初始化子程序、发送子程序和接收子程序。
The key parts of the system software, which is composed of the initialization, transmission and receiver program, are described in details.
论文给出了系统的软件流程图和部分重要的子程序。
The software flow chart as well as some key subprogram is given in this paper.
当一些程序进入系统，这些程序就由任务排队子程序放在队列里(图10.3)。
As programs enter the system, they are placed on a queue by the job queuing routing (Fig. 10.3).
所设计的计算矩阵指数的子程序保证了系统仿真精度不受计算步长的限制，从而大大提高了计算效率。
The procedure for calculating the exponential matrix guarantees that the simulation accuracy is not restricted by the calculating step length, then the calculating efficiency has been raised greatly.
所设计的计算矩阵指数的子程序保证了系统仿真精度不受计算步长的限制，从而大大提高了计算效率。
The procedure for calculating the exponential matrix guarantees that the simulation accuracy is not restricted by the calculating step length, then the calculating efficiency has been raised greatly.
应用推荐