该共聚物具有较好的粘接性能。
对多种建材有良好的粘接性能。
Have good cementation ability for various building materials.
为提高聚硫密封剂的粘接性能提供了技术依据。
The study provide the technical accumulation for developing of polysulfide sealant and increasinging the bonding capability of polysulfide sealant.
作为一个通用密封材料具有优异的粘接性能的各种感光。
Used as a general purpose encapsulant that has excellent adhesion to a wide variety of substrates.
本文研究共辐射接枝法改善聚四氟乙烯车削板的粘接性能。
This is a work to improve viscous property of polytetrafluoroethylene turning plate by, mutual radiation grafting.
讨论了各组分用量对粘接性能的影响,确定了其最适宜用量;
The effect of the contents of the components was discussed and their optimal contents were taken.
该热熔胶在保证粘接性能的前提下,降低了体系的黏度和成本。
The modified polyester hot melt adhesive has lower viscosity and cost of system in the condition that the adhesive properties are ensued.
本文着重研究了不同表面处理条件下硅橡胶胶粘剂的粘接性能。
The bonding properties of several silicone rubber adhesives under different surface treatment conditions are investigated.
力学性能优异、低烧蚀率、良好的粘接性能仍将是未来的研究重点。
Excellent mechanical properties, resistance ablation and adhesive properties will continue to be the focus of the future research.
结果表明,室温固化型高温粘结剂对石墨材料具有良好的粘接性能。
Results showed that the high temperature adhesive cured at room temperature had satisfied bonding performance for graphite materials.
介绍了等离子体对涤纶织物进行表面处理以改善其粘接性能的研究进展。
This paper introduces the research progress on improvement of adhesion of PET fabric by plasma treatment.
文章还介绍了蜜胺衍生物作为无刺激性气味的甲醛给予体对粘接性能的影响。
Effect of melamine derivative as pungent odorless formaldehyde donor on bonding properties of adhesive was also described.
本发明加入磨细的高炉矿渣粉,既可以降低施工成本,又提高硬度和粘接性能。
By adding the grinded blast furnace slag, the invention can reduce the construction cost and improve the rigidity and the bonding performance.
紫外光固化胶粘剂是指借助UV辐射使粘接材料快速产生粘接性能的一类胶粘剂。
UV-curable adhesive is a class of important material that could be rapidly created adhesive bonding properties by the UV radiation.
在SBS上引入极性基团进行原位改性,可以提高与极性材料的相容性及粘接性能。
The compatibility with polar material and bonding performance of SBS is improved by introducing polar group.
考查了丙烯酸酯单体种类、用量以及环氧树脂用量对改性酚醛树脂粘接性能的影响。
The influence of acrylate and epoxy resins on the adhesion properties of modified PF resin was studied.
结果表明处理后PVF的粘接性能明显有所改善,剪切强度较未处理时提高两倍左右。
The experimental results show that the adhesion of PVF treated with plasma is obviously improved and its shear strength is three times as that of untreated PVF.
结果表明,处理后PVF_2的粘接性能明显改善,剪切强度较未处理提高2倍左右。
The experimental results show that the adhesion of PVF_2 treated with plasma obviously improved.
采用活性基团取代的烷氧基硅烷作为偶联剂,提高了产品对玻璃、铝等基材的粘接性能。
The use of the active group substituted alkoxy silane as a coupling agent improves the adhesion of the product to glass, aluminum and other substrates.
为了防滑涂层,有必要治疗之前,喷雾过程中,取得良好的润湿性和粘接性能最佳的涂料。
For slip-coating it is necessary to treat prior to the spray process, to achieve good wettability and optimum adhesion properties of the coating.
介绍了几种新型中空玻璃密封胶的配制,并对其气体渗透系数、粘接性能、耐候性等进行了讨论和比较。
Preparation of some new sealants for cavity-glass is described, and their gas permeability coefficients, adhesion, weather resistance are discussed and compared.
经应用及检测结果表明:HM—G热熔密封胶与组装材料有良好的粘接性能,达到了设备要求的技术指标。
The test showed that the hm-g heat melt adhesive had well cohesiveness to the substrate and meeted the technology standards of the equipment.
增塑剂的种类对SPU密封胶的力学强度有很大影响,随着增塑剂加入量的提高,力学性能和粘接性能下降。
Plasticizer had strong effect on the mechanical properties of SPU sealant. The more plasticizer was added, sealant of weaker mechanical properties and adhesion property was obtained.
实验结果表明,该泡沫材料不仅具有良好的力学性能,而且具有普通硬质聚氨酯泡沫所没有的良好界面粘接性能。
The results showed that PUF not only had the outstanding mechanical properties but also had good interfacial bond property.
研究了装演复膜胶的制备方法,探讨了引发剂用量与转化率的关系及AA用量、不同增粘树脂对粘接性能的影响。
The method preparation of finishing adhesive was studied. The effects of different amount of thickening agent, AA and initiator on the properties of adhesive were discussed.
研究了溶剂比、乳化剂与稳定剂用量、改性单体及功能单体的用量、引发剂及交联剂用量等因素对粘接性能的影响。
The effects of the ratio of solvents, the quantity of emulsifying agents and stable agent, the amount of modification monomer and functional monomers and initiator on the properties were studied.
通过万能电子拉力机测试了贻贝仿生聚氨酯的粘接性能,并通过紫外-可见光和流变行为测试初步探讨了粘接机理。
The shear adhesive strength was characterized by universal tensile machine, and the adhesive mechanism of the mimetic polyurethane was also studied by UV-vis and rheology analysis.
通过万能电子拉力机测试了贻贝仿生聚氨酯的粘接性能,并通过紫外-可见光和流变行为测试初步探讨了粘接机理。
The shear adhesive strength was characterized by universal tensile machine, and the adhesive mechanism of the mimetic polyurethane was also studied by UV-vis and rheology analysis.
应用推荐