用扫描电镜（SEM）分析了粉末结构及制备工艺对涂层显微组织的影响。
The effects of material structure and preparation process on microstructure of the coating were studied by SEM.
阐述了生物矿化作用机理及其主要的生物控制因素，介绍了模拟生物矿化控制超细粉末结构形貌的三个途径，并展望了其发展趋势。
Three main approaches controlling structure and morphology of ultrafines by modeling biological mineralization are introduced, and its development is looked for ahead.
当制造过程结束，材料凝固，为凝固的粉末被喷气头吹掉，这样，整个的结构就显现出来了。
When the process is complete and the material is set, the loose powder is blown away with an air jet to reveal the completed structure.
有机化合物，一种应用在环氧粉末涂料作为固化剂使用的一种化学结构。
Organic compounds. A structure sometimes used in curing agents in Epoxy powder coatings.
大多数用固定模压制的结构件都是铁基的。粉末可以是单一元素、预先合金或部分合金。
The majority of the structural components produced by fixed die pressing are iron-based. The powders are elemental, pre-alloyed, or partially alloyed.
活性粉末混凝土(RPC)作为一种高性能结构材料，与常规混凝土相比，具有超高强度、高韧性、高耐久性等优良特点。
Compared with conventional concrete, Reactive Powder concrete (RPC) possesses excellent properties such as ultra-high strength, high toughness and high durability etc.
射线粉末衍射数据确证了其晶体结构，证明这些荧光粉晶相组成纯净。
The data of X-Ray Powder Diffraction have proved these phosphors 'structure and their pure crystal composition.
结果发现，球磨时间对混合粉末的结构及颗粒形貌存在显著影响。
The results show that the milling time has significant effect on the powder structure and particle configuration.
晶粒细小，结构疏松，应变能大的氧化镁粉末具有较高的活性。
MgO powders, with small particle size, loose structure and high strain energy, have high activity.
本文还分析了这种钢镀覆石墨粉末及其烧结材料的金相结构，解释了材料的高导电性的原因。
Metallographic structure of copper coated graphite powder and sintering material were analyzed and the reason of the material having high conductivity was illustrated.
通过X -射线粉末衍射证明了溶析结晶与冷却结晶得到的晶体结构相同。
X-ray powder diffraction showed that crystals prepared by cooling and dilution crystallization were of the same structure.
射线粉末衍射仪表征了它们的结构特征。
Their crystalline structures were characterized by X ray powder diffraction.
并综述了功能梯度材料目前常采用的一些制备方法及使用情况，包括火花等离子烧结技术、粉末冶金法、离子结构工艺等。
And, some preparation methods of FGM and their applications are dealt with, including spark plasma sinter technology, powder metallurgy method and plasma structure craftwork.
经元素分析、X -射线粉末衍射、中红外、远红外光谱进行表征，确定了配合物的组成和结构。
Its chemical composition and structure are characterized by the chemical analysis, elemental analysis, IR patterns and X-ray powder diffraction.
研究了粉末烧结双相不锈钢及其时效后的相结构和强韧性。
The phase structure and high toughness of powder sintered biphase stainless steel and after its ageing have been studied.
本文着重介绍了拉挤毡用粉末粘结剂NJP—328的结构、性能以及生产工艺等。
The structure, behavior and production process of powdered binder NJP - 328 for pultrusion mat are emphatically introduced in this paper.
多孔显示板材料的孔隙结构和特性是影响其显示图像的主要因素，而孔隙结构和特性又主要取决于粉末原料的性质及制取材料的工艺。
Pore structure and characteristic of porous display plate materials are the main factors affecting the image, and in turn depend on the properties of powder and its manufacture technologies.
研究表明，采用粉末与钢板轧制工艺可以成功地制备出钢面板泡沫铝夹心结构；
The results show that coiling the powder together with steel plates can successfully form the structure of aluminum foam sandwich (AFS).
本文根据文献的有关资料，综述了粉末衍射图形拟合修正晶体结构的方法。
The refinement of crystal structure by the powder diffraction profile fitting method is reviewed on the basis of the relevant in the literature.
根据渐开线齿轮的基础知识及粉末压制烧结理论确定了设计模具型腔及结构的原理和方法。
According to the requirements for the involute gear and powder metallurgy theory, the present article gives a principle and method for designing die cave and structure.
应用分析电子显微术对粉末冶金高速钢的精细结构进行了研究。
The fine scale microstructure of powder metallurgy high speed steels has been investigated by using analytical electron microscopy.
蜂窝状筛网催化剂的高开孔结构，使其较粉末催化剂具有较低的压力降，较蜂窝状堇青石催化剂具有较高的传质系数。
Wire mesh honeycomb combines a low pressure drop compared with powder catalyst and high mass transfer compared with ceramic honeycomb, mainly attributed to the high porosity of wire mesh structure.
粉末和陶瓷体材为立方结构。
The phase structure of both powders and ceramics was cubic phase.
通过该结构电流电压特性的测量和发光特性的观察研究了金刚石粉末冷阴极的电子场发射性能。
By measuring current voltage characteristics and observing light emission of these diodes, electron emission feature of these diamond powder cold cathodes were investigated.
结果表明，在构造胞状结构过程中，有机添加剂起到了粉末流动载体及对坯件的保形作用。
The results indicate that the chosen additive is the carrier of powder and has a good effect of holding shape in co-extrusion process.
介绍带台阶并在圆柱体上有三棱面的粉末冶金村套的材料配方、压制方法和模具结构。
Material compoSition, compacting method and die structure of P/M bush with step and prismatic surface on cylinder were outlined.
利用透射电镜（TEM）、X射线衍射（XRD）、X射线光电子谱，表征了金纳米粉末的结构、形貌及其化学组分。
Their structure, morphology and components have been characterized using transmission electron microscope(TEM), X-rays diffraction(XRD), and X-rays photoelectron spectrometer(XPS).
研究了粉末冶金法制备泡沫铝时泡沫孔结构及胞壁微观组织变化的规律。
Evolution of pore morphology and cell wall microstructure of aluminum foam during powder metallurgical foaming was studied.
研究了粉末冶金法制备泡沫铝时泡沫孔结构及胞壁微观组织变化的规律。
Evolution of pore morphology and cell wall microstructure of aluminum foam during powder metallurgical foaming was studied.
应用推荐