冯·诺依曼从数量上比较了大脑神经元和真空电子管的运算速度，大胆暗示两者可以类比。
Von Neumann quantitatively compared the speed of brain neurons and the speed of vacuum tubes, boldly implying the two could be compared.
我发现在15 -20年后将会出现一个块拥有大脑神经元数目一样的晶体管的言论是不真实的。
I find the argument that in 15 to 20 years there will be the same number of transistors on a computer chip as neurons in the human brain spurious.
著名诗人元结到容县都督府任容管经略使，在容州城东筑经略台，用以操练兵士，游观风光。
The famous poet Yuan knot to Rongxian County Dudu Fu Renjingguan by slightly, in the capacity of the East to build a little Taiwan, to practice soldiers, tour scenery.
波浪荷载沿垂直立管的分布是不规则的，这对工程中用有限元法分析立管强度进行等效波浪结点力的计算带来困难。
The irregular distribution of the wave load along the erect riser makes the computation of equivalent wave nodal force difficult when applying Finite Element Method to analyze risers strength.
远场涡流技术结合计算机技术和有限元分析方法，解决了在役铁磁性材料换热器管检验的问题。
Remote field eddy current technique combined with computer technique and finite element analysis was used to examine the inservice ferromagnetic heat exchanger tubing.
先进的IGBT平面元胞设计同二极管精密的寿命控制工程相结合，这样的芯片就具备了崭新的安全工作区。
Together with the advanced planar cell design of the IGBT and the sophisticated lifetime engineering of the diode, this chip set offers an unprecedented safe operating area.
使用有限元法计算穿孔管消声器的传递损失，并与实验测量结果进行了比较，二者吻合良好。
The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.
本文从ANSYS有限元分析和试验两方面分别对光管和波节管在承受内压爆破和承受外压失稳时的性能进行研究。
This paper studies the performance of internal pressure blasting and external pressure squirm between smooth tube and corrugated tubes from the ANSYS finite element analysis and testing.
神经芯片技术是一种将神经元或脑组织与场效应晶体管技术结合起来研究神经元电活动和大脑学习记忆等高级功能的新技术。
Neurochip is a new technology of studying the electrical activities of nerve cells and advanced functions of brain, such as learning and memory by combining with field-effect transistor technique.
本论文分别采用有限元法和等效圆筒法对波纹管在扭转载荷作用下的应力分布和位移变化情况进行了计算。
The stress and displacement distributions of the bellows under torsion loading are investigated by using both finite element method (FEM) and equivalent cylinder method.
对螺纹槽管进行了疲劳强度计算，并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
采用有限元法分析了曲线顶管施工对管节和土体的影响效应。
The influence domino effect for pipe and soil caused by construction has been analyzed by using FEM.
基于管弯曲回弹有限元模拟模型研究了弯曲工艺参数和材料参数对管弯曲回弹的影响规律。
Based on the tube bending FEM simulation model, the tube bending springback rule under the different craft parameters and the material parameters was studied.
文章对在悬索式管桥体系中应用ANSYS程序有限元结构分析方法，分析管桥主要构件的受力情况并确定安装尺寸方面进行了探讨。
This paper discusses the analysis on forces and determination of installation dimensions of main structural parts of the suspension pipe bridge by means of finite element analysis program ANSYS.
采用有限元分析软件ANSYS，对某大型固定管板式换热器管板的稳态温度场和热应力场进行了三维有限元分析。
By use of finite element analysis software ANSYS, the steady-state temperature field and thermal stress field in the tubesheet of a large fixed tubesheet heat exchanger were analyzed.
理论计算部分运用大型通用有限元软件ANSYS，对管节点进行了应力分析并计算了热点应力及应力集中系数。
In the part of theory calculation, utilize general FEM software ANSYS, calculate the tubular joints, then summarize the hot-spot location and the SCF of joints.
建立了取样管与沉积物接触的二维轴对称有限元模型。
A two-dimensional axisymmetric finite element model of sampling tube and sediments is built.
用有限元传递矩阵法分析火炮身管固有振动特性，矩阵阶次低，计算所得的固有频率与实际固有频率接近，误差在允许的范围内。
Matrix step is low by using the finite element transfer matrix method. Natural frequency by calculation approaches to actual natural frequency and the error is allowable.
根据有限元计算结果分析了螺旋槽管的主要结构参数对滚压力的影响规律。
Based on the results obtained, the effect of main geometrical parameters of the tube on roll-pressing force was analyzed.
该工作对复杂空间管架类结构的有限元自动建模有普遍应用价值。
This work is very practical for finite element automatic modeling of complex space tubing structure.
在模态分析的基础上，采用几何非线性有限元的分析方法，对悬索式管桥进行了横向风共振分析。
On the basis of the modal analysis, the nonlinear finite element is used to analyze the dynamic response of suspension pipe bridge to cross wind excitation.
本文提出了以声脉冲管测量辐射头为方形的一种阵元(纵向振动换能器)的输入力阻抗的方法。
In this paper, a method of measuring the input mechanical impedance of the array element (longitudinal vibrating transducer) with square radiation head by using impulse sound tube is proposed.
用动力接触有限元法对带间隙支座的管系非线性动力响应进行分析。
The nonlinear dynamic response of piping with gapped supports is analyzed by the finite element method for the dynamic contact problem.
为提高保护外壳的膨胀性能，提出了圆形波纹管形式外壳的设想，并采用非线性有限元方法分析了其膨胀性能。
To enhance expandable ability of expandable screen shell, a circular bellow shell is designed and its expandable ability is analyzed by non-linear FEA method.
利用有限元分析软件ANSYS，对一个典型的管母线、支柱瓷瓶和电杆系统作整体结构强度分析。
With finite element analytic software ANSYS, the intensity analysis of the integral structure for typical tubular busbar, support insulator and the pole system was made.
本文建立了悬索管桥分析的有限元模型，并考虑了悬索管桥恒载产生的初始内力、拉索垂度等几何非线性因素。
In this paper, a finite element model for the analysis of the pipeline suspension bridge was set up with considering the initial internal force and verticality of the staying cable.
本文首先通过有限元分析得到了轴力作用下的TT管节点在焊接区的应力分布以及应力集中系数。
The stress distribution and the stress concentration factor in the welding region of tubular TT-joints subjected to axial loads are analyzed using finite element method in this study.
本文首先通过有限元分析得到了轴力作用下的TT管节点在焊接区的应力分布以及应力集中系数。
The stress distribution and the stress concentration factor in the welding region of tubular TT-joints subjected to axial loads are analyzed using finite element method in this study.
应用推荐