所建立的模型可以通过简单应力路径下的试验测定模型参数。
These four models' parameters can be determined conveniently by tests with simple stress path.
用不同的简单应力状态下的应力-应变试验曲线，可以得到不同的广义等效应力-应变关系。
Using experimental stress-strain curves in various simple stress states, generalized effective stress-strain formulae may be derived correspondingly in various forms.
其公司战略也应该十分简单，执行力也应力求完美无缺。
Its strategies, then, should also be pretty simple and its execution near flawless.
此外还研制了简单综合方法用于确定滚道型面并计算了摆线滚道与球齿的接触应力。
A simple synthesis method was also found to determine the raceway forms and compute the contact forces among the balls and raceways.
不过，这个方法可以非常有用的一个简单的识别的最大应力区。
However, this method can be very useful for a simple identification of maximum stress areas.
复杂应力条件下的黄土损伤演化方程的表现形式与简单加载条件下的完全相同，区别只是在于损伤参量的影响因素不同。
Although the expressional form of damage evolution equation in complicated stress condition is the same as that in simple load condition, the influence factors are different of the damage parameters.
相反，在变形较简单的部位其应力变化较平缓。
In contrast, at simple deformed structural parts the stress become more moderate.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
最后，对新本构关系与其它理论的本构关系作了比较，计算了简单剪切变形的应力。
Finally, the stresses of simple shear deformation are worked out to examine some constitutive relations.
笔者对锚杆检测技术的历史进行了简单的总结，并详细、重点介绍了目前被广泛使用的应力波反射法。
This paper summarizes simply the history of bolt testing technique, describes in detail stress wave reflection method.
通过对深圳地区地应力场的算例，表明这种方法是简单而有效的。
The practical application of this method to Shenzhen area shows that it is simple and effective.
实际岩脉式从理论上可以通过两个最简单的应力场的叠加复现。
The real dike pattern can be approximately duplicated theoretically by the superposition of two very simple stress fields.
解决工程问题时，可以选择简单的参考状态，并用拟合岩石单轴受压的全过程应力应变关系曲线确定扰动因子的参数。
Simple reference states can be used to solve engineering problem. Through simulating the overall curvature of rock's stress-strain relationship under uniaxial compression, parameters are attained.
通过对试算结果与实测结果的对比，说明有效应力迭代算法是一种简单实用的方法，可用于指导桩基础的设计。
By comparing the calculation result with the field measured value, effective stress iterative method is verified to be simple and practical and can be used in pile foundation design.
应力函数法是求解应力边值问题和混合边值问题，诸如弹性固体接触问题简单、直接的方法。
Stress function method is a simple and straight approach for stress or mixed boundary value problems, such as solids under contact.
利用简单条分法对海床和建筑物进行稳定性分析，在滑动面上考虑波浪附加应力的影响。
The influence of wave induced excess stresses on the slip surface is considered in the stability analysis.
由于壳体经向应力求解过程比较简单，本文只给出了如何应用截面法求解壳体环向应力，并举例说明了该方法在其它方面的应用。
As the procedure is simple for stress in meridian direction, this paper only discusses how to use the cross-sectional method to determine hoop stress and other aspects of applications.
其具有承载稳定、支承载荷受力简单、应力较低等优点，具有较高的使用价值。
It has the load bearing stably, the supporting load stress simple, the stress is lower and so on the merit, which has the higher use value.
结果表明，该方法简单方便、应力分布均匀、试验结果稳定、尺寸效应较小，是混凝土一种理想的拉伸试验方法。
The results show that it is a reasonable tensile test method characterized by its convenience, uniform stress distribution, higher stability and lower size effect.
根据复合材料平均应力与应变关系，获得了预测有效轴向模量的形式简单的代数方程。
Further a group of algebraic equations to predict effective longitudinal shear modulus of multiphase fiber composites were obtained by virtue of the averaged stress strain theorem.
其结构简单，能实现预应力锚固，支护效果好，具有广泛的实用性。
The structure is simple, the prestressed anchorage operation is realized, the supporting effect is good, and the practicability is wide.
报告了用简单的应力方法使均匀光栅成为线性啁啾光纤光栅的技术，并推导出了相应理论。
The technique for turning a uniform grating into a chirped grating by using a simple strain method is reported and the corresponding theory is deduced.
结论周向应力的近似公式及其绝对误差的公式简单易行，便于临床应用。
Conclusion the approximate formula of circumferential stress and the absolute error is accepted, which is easy for the application.
它具有辅助电路简单，辅助电路的电感、电容和二极管的电流电压应力小，副边占空比损失小等优点。
This auxiliary network has the advantages such as its circuit is simple, the current stresses and voltage stresses on its components are small.
通过不同环境温度下的简单拉伸试验和应力控制下的低周疲劳试验，找出了环境温度对应力控制下的疲劳行为和疲劳强度的影响。
Simple tensile tests and low-cycle fatigue tests under stress control at different temperature were conducted to investigate the effects of temperature on fatigue behavior and fatigue strength.
本文从平面应力场理论分析入手，介绍了简单褶皱的力学模式、复合构造模式，并进行了构造裂缝的理论分析。
Starting from analyzing the theory of plane stress field, the paper introduced mechanical mode for simple fold and composite structural mode and analyzed the theory of structural fracture.
结果表明：此方法简单方便，可在线连续地定量测试木材干供应力。
The results show that this is a simple method , by which stresses of wood in drying can be measured on-line and continuously.
根据试验观察，提出了一种模拟预应力钢索与索道孔壁接触区域和接触压力的简单、实用的方法。
A simple and practical method was proposed to simulate the contact region and the contact pressure between the prestressed tendon and the wall of ropeway.
文中利用一个简单直观的方法，解出了对称截面情况下的剪应力分布。
A simple and visual method is used tO give shear stress distribution in symmetrical section.
焊接高强钢盖板的预应力钢梁构造简单，刚度较大，节约钢材，是一种值得推广的结构型式。
The prestress of steel girder by high strength cover plate can raise stiffness and save steel, with simple configuration.
应用推荐