圆柱形球头立铣刀是一种高效刀具。
The cylindrical end mill with ball-nose is one kind of highly efficient cutting tool.
这是通用型涂层立铣刀。适合槽加工。
规格:麻花钻、三刃钻、铰刀、立铣刀。
Specification: twist drill, three-blade drill, reamer, end-milling cutter.
但由于螺旋立铣刀结构形状极其复杂,给设计和制造带来困难。
It is very difficult to design and manufacture milling cutter because its intricate geometry configuration.
分析结果可以为高速切削金刚石立铣刀的设计提供可靠的理论依据。
The results in this paper will provide a reliable theoretical guidance to the design of the diamond end milling cutter.
提出了一种新的曲面平头立铣刀加工无干涉刀位轨迹自动生成的算法。
A new algorithm of automatic generation of interference free cutter location path for nc machining of free form surfaces with flat end cutters is proposed.
该模型的建立为球头立铣刀刃磨参数选择及刃磨装置设计具有重要的作用。
It is important for the choice of sharpening parameters and the design of sharpening equipment of the cutter.
采用多因素正交试验法进行铝合金铣削试验,测得了硬质合金立铣刀的铣削力。
Milling tests for aluminium alloy are carried out with multi-factors orthogonal test method, milling force of the carbide end milling cutter is measured.
将有限元分析方法引入硬质合金立铣刀CAD中,对刀具的强度、刚度进行分析。
Let the finite element analysis method be introduced into the CAD of carbide end mill, and carry out an analysis on the strength and rigidity of the cutter.
分析高效切削刀具材料的主要特征,介绍可转位立铣刀和智能化专用刀具的应用。
The application of rotatable-position end milling cutter and intelligent special cutter is introduced in this paper.
该方法已在螺旋刃球头立铣刀的实际刃磨中得到应用,证明了其正确性和可行性。
This method has been applied in the sharpening of helical ball nosed end- mills, which shows that the method is correct and feasible.
系统地分析了刀具转速和悬伸长度对立铣刀径向位移、最大等效应力的影响规律。
At the same time, the influence laws of the rotational speed and suspended stretch of the tools on the radial displacement and the maximum equivalent stress have been investigated in detail.
通过硬质合金立铣刀高速加工铝合金的铣削试验,对螺旋状切屑的成形进行了研究。
By the experiment of high-speed milling aluminium alloy with carbide end milling cutter, the method of helical chip formation was researched.
在图形工作站上,仅需输入订货数据,即可实现可转位螺旋立铣刀的三维自动设计。
By inputting ordering data, the solid modeling design of helical end mills on graphic workstation can be realized automatically.
通过切削实验,研究了用三齿立铣刀高速铣削ZL101铸铝时切削力的变化规律。
Based on the cutting experiment, the changing rule of the cutting force in the high-speed milling of casting aluminum ZL101 by the end mill with three edges is discussed.
通过该模型,分别建立了柱面上、球面上和锥面上球头立铣刀的等导程螺旋线的数学模型。
By using it, the model of equal lead on the cutter can be applied to the cylinder, cone and sphere.
根据单点切削力模型,考虑平头立铣刀多刃和具有螺旋角的特点,建立了铣削力离散模型。
Considering the features of multi-edges and helix flutes for end milling, a cutting force discrete model base on single point cutting tools model was built.
球头立铣刀的应用越来越广泛,其质量好坏直接影响到加工对象的表面质量、精度及加工效率。
Ball End milling cutter is widely used in industry. The quality of the cutter directly decides the milling surface's roughness, accuracy and efficiency of the milling process.
根据钛合金曲面数控铣削加工特点,利用正交试验法优化钛合金曲面开槽用球头立铣刀的几何参数。
Based on the features of NC milling on ti alloy curved faces, the geometric parameters of ball end mills for fluting on ti alloy curved faces are optimized by using orthogonal test method.
对硬质合金整体立铣刀高速铣削加工航空铝合金时的刀具磨损形态及其磨损机理进行了观察和分析。
The wear patterns and wear mechanisms of solid cemented carbide are analyzed in high-speed milling of aluminum alloy.
设计者只要输入立铣刀的槽形参数,计算机便可自动计算出成形铣刀廓形坐标并绘制出刀具廓形图。
So long as designers input slot section parameters of end cutter, the coordinate of formed milling cutter profiles is calculated automatically, and cutter profile graph is drawed by computers.
由于整体硬质合金立铣刀形状结构复杂,传统的设计方法无法对刀具进行精确的强度、刚度及应力分析。
Because of complex structure, traditional designing methods can not be used to do intensity analysis, stiffness analysis and stress analysis precisely for solid carbide end mill.
多仁精工。新开发并从2006年6月开始正式市场销售的新型立铣刀力量大,可以进行高精度的中切削。
Many new development and benevolence, seiko. From June 2006 to market sales of new vertical milling power, high precision of cutting.
本论文介绍了生成三种刀具轨迹的算法,并且给出用立铣刀代替球铣刀加工实体零件时刀具中心轨迹的计算公式。
This paper presents an algorithm of generating three kinds of tool paths and a formular of calculating tool center paths when machining parts with cylindrical end-milling cutter.
我们研制的MMK6026六轴五联动CNC工具磨床用于加工锥形球头立铣刀和其它复杂形状刀具的前刀面与后刀面。
Our product MMK6026 , which is CNC tool grinder with 6-axis and 5-coordinate controls, is used to machine the rake face and relief of conical ball end mills or other complex shaped tools.
我们研制的MMK6026六轴五联动CNC工具磨床用于加工锥形球头立铣刀和其它复杂形状刀具的前刀面与后刀面。
Our product MMK6026 , which is CNC tool grinder with 6-axis and 5-coordinate controls, is used to machine the rake face and relief of conical ball end mills or other complex shaped tools.
应用推荐