而近来，由于镍合金的质量得到提升，等离子体炬已能保证持续工作了。
These days, though, the quality of the nickel alloys has improved so that the torches work continuously.
其它正在研究的可用于未来锂离子电池的材料包括锡合金和硅材料。
Other materials being investigated for use in future lithium-ion batteries include tin alloys and silicon.
等离子体炬的核心部分是一对电极，通常用以镍为基础的合金制成。
The core of a plasma torch is a pair of electrodes, usually made from a nickel-based alloy.
研究了在不同气氛下进行离子渗氮对TC 4钛合金渗氮层的组织与性能的影响。
The effect of the atmosphere on the structure and properties of ion nitriding layer of alloy TC4 was investigated.
气门密封面激光熔覆的工艺和性能研究较多，但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。
Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.
表面成分分析表明，氧化和离子注入后，表面形成钛氧化物，使合金的耐腐蚀性得到明显的改善。
The surface component analysis showed the titanium oxidation was formed on NiTi alloy surface after oxidation and ion implantation.
在微波等离子体化学气相沉积装置中，研究了负偏压形核对金刚石薄膜与WC 6 %硬质合金刀具附着力的影响。
The influence of bias enhanced nucleation(BEN) to the adhesion between diamond coating and WC-6%Co carbide cutting tool is researched with the microwave plasma (CVD) instrument.
其次是黑色镀层，探讨了目前较受欢迎的电镀黑色锡镍合金及离子镀碳化钛。
Then, black Sn-Ni alloy plating and ti carbide ion plating, quite well received currently, are discussed.
良好的电化学性能表明高分散锡和锡钴合金复合材料有望成为锂离子电池负极材料。
The good electrochemical performance shows that the highly dispersed tin and tin-cobalt alloy composites may be promising anode materials for lithium ion batteries.
镉离子主要来源于电镀、电池、合金制造、颜料、采矿与选矿行业排放的工业废水。
Cadmium ion mainly comes from industrial waste water discharged by electroplating, battery, alloy manufacturing, pigment, mining and refining process.
选择硫酸盐-柠檬酸盐体系锌锰合金镀液，研究了阳极、二价锰离子以及连续作用等因素对镀液稳定性的影响。
Herein, zinc-manganese alloy bath containing sulfate and citrate ions was selected, and the effect of anodes, manganous ions and continuous operation on bath stability was studied.
采用多弧离子镀制备的合金涂层成分与合金阴极靶之间通常存在一定程度的偏差。
The composition generally changes from alloy cathode target to alloy coating deposited by multi arc ion plating to some extent.
在电镀过程中，镀液主盐离子浓度的变化对镀层的影响极大，对合金电镀更是如此。
The variation of concentration of main salt in electrolyte affects the quality of metal coating obviously, and it is for alloy plating coating as well.
研究了ADC12铝合金表面微等离子体氧化法制备黑色陶瓷膜的电解液成分和电参数等对膜层性能的影响。
Influences of main parameters such as composition of electrolyte and electrical parameters in preparing black ceramic coating by microplasma oxidation on ADC12 aluminum alloy were studied.
本文用等离子体基离子注氮技术(N -PBII)对AZ31镁合金进行了表面改性处理，并在部分注氮样品上沉积dlc膜。
In this paper, magnesium alloy AZ31 has been treated by nitrogen-plasma based ion implantation (N-PBII). And we deposited DLC on a part of the nitrogen-implanted samples.
测试了锂离子蓄电池电镀锡阳极在不同充电（合金化）状态和不同充放电循环次数后的电化学阻抗谱。
The impedance spectrum of the electroplating tin anode for Li-ion batteries is measured at various states of charge(alloying)and after charge-discharge cycles.
结论镍铬合金烤瓷全冠表面镀金处理能降低铍离子的析出量，从而提高镍铬合金烤瓷全冠的生物相容性。
Conclusion the gilding treatment can decrease the quantity of beryllium ion which released from Ni-Cr porcelain crown, and improve the biocompatibility.
讨论了钛离子注入剂量对铅及铅-锑合金耐蚀能力的影响。
The effect of titanium ion implantation dosage on the corrosion behaviors was discussed.
它不仅溶解度好，而且还是非氧化性的物质，不会螯合金属离子，毒性也相对较低。
It is non-oxidizing, provides the necessary solubility, will not chelate metal ions, and has relatively low toxicity.
结果显示：每秒钟释放的离子数，以铝钒钛合金最少，3种不锈钢次之，镍铬合金较多，铜合金最多。
The results showed that: the amounts of releasing ions per second, Al-V-Ti alloy was the least, followed by 3 kinds of stainless steel, Ni-Cr alloy, Cu alloy.
二氢杨梅素抗氧化活性优异，其作用机制是通过螯合金属离子，从而消除其对自由基氧化的催化作用。
Dihydromyricetin has excellent antioxidant activity. Its antioxidant activity embodies by chelating metal ion and clear the catalysis to free radical oxidation.
第三，银粉玻璃离子具有缓慢释放氟离子的特性，而银汞合金没有。
The third , Hi-dense can release fluoride slowly, but silver amalgam alloy can't.
采用双层辉光离子无氢渗碳方法进行钛合金表面处理。
The surface treatment for titanium alloys is conducted by the new carburizing method of double layer glow plasma carburizing without hydrogen.
影响等离子表面冶金熔池中合金熔体粘度的主要因素是电流和粉末体系中的合金元素。
The electric current and alloy elements in powder system are major factors for influencing melt viscosity in surface metallurgy by plasma beam.
在钛合金表面用微等离子体氧化能产生一层陶瓷膜。
A layer of ceramic film can be grown on ti alloy by the micro plasma oxidation.
离子束混合制备表面合金相，是一种新的材料表面处理技术。
The method of producing surface alloy phases by ion beam mixing is a new technique used in the treatment of material surfaces.
简要介绍了双层辉光等离子表面合金化设备的类型、组成、功能、结构、原理等。
The type, constitutes, function, structure, principle of double glow plasma discharge alloying process equipment for surface was briefly introduced.
阴离子交换容量（AEC）是反映混合金属层状氢氧化物（MMLHC）电荷特性的重要指标。
Anion exchange capacity (AEC) is an important property of mixed metal layered hydroxide compound (MMLHC).
阴离子交换容量（AEC）是反映混合金属层状氢氧化物（MMLHC）电荷特性的重要指标。
Anion exchange capacity (AEC) is an important property of mixed metal layered hydroxide compound (MMLHC).
应用推荐