抗磨特性优异，延长发动机寿命；
It has excellent antifraying characteristics. It helps to extend the life of the engines.
介绍了矿渣的粉磨特性。
Properites of slag's powder characteristics are introduced in this paper.
因而钢渣雷蒙磨采用高锰钢磨辊和磨环材料，来适应钢渣的粉磨特性，已经取得良好的技术效果。
Therefore use high manganese steel slag Raymond grinding milling roller and grinding ring material, to adapt to the steel slag grinding characteristics, has made a good technical effect.
试验研究依据矿物特性，采用铅锌等可浮，粗精矿再磨措施，有效地解决了铜铅锌矿物分离问题。
According to the minerals characteristic, the experiment developed con? flotationable flotation flewsheet and Pb, Zn mixed concentrate regrinded to successfully separate Pb and Zn.
采用了化学分析、激光粒度分析、扫描电镜等手段，对冀东水泥股份有限公司球磨和立磨制备的生料特性及生料易烧性进行了研究。
The chemical analysis, laser granulometer and SEM was used to study the characteristic and burnability of raw meal prepared by ball mill and vertical mill in JIDONG CEMENT CO.
通过这些方法所获得的数据能够从一方面或多方面反映油品的性能和磨粒的特性，从而得到机器故障信息。
The acquired data by the above methods can reflect oil performance and characteristic of particles, and be further analyzed to the faults in a monitoring machine.
本文主要对双圆盘磨浆机的打浆特性、典型打浆工艺流程作了阐述。
Beating Feature and typical technological process of double disc refiner were analysed.
物料的压缩—反弹特性是研究高压辊磨机动力学的基础。
The compression-expansion properties of particle beds are the basis for studying the mechanism of the high pressure roller mill.
结果表明，高效减水剂对水泥熟料具有不同程度的助磨作用，作用的大小与减水剂掺量及熟料自身物料特性有关；
The results show that superplasticizer has effect on clinker grinding in varying degrees, which depend on the amount of superplasticizer and the property of clinker.
超声珩磨与珩研复合加工技术是近来对发动机缸套等重要零件表面纹理特性研究的热点。
Ultrasonic honing and lapping complex machining technology is the hot topic of the surface texture characteristics of important parts such as engine cylinder sleeves.
分析了平面钻尖的刃磨方法，并对其几何特性进行了分析和求解。
The grinding methods of planar drill point are discussed. Geometric characteristic of planar drill point is analyzed and solved.
本文从不同方面分析了大型滚式钢球磨的特性和节能措施。
This paper analyses cylinder mill from operation characteristic and energy-saving means.
本文首先研究了闪光铝粉颜料的特性，讨论了棒磨机制备铝粉颜料的各种工艺条件对研磨效果的影响。
The paper research on the specialties of flaking aluminum pigment, discussed the related effect factors on the shape of aluminum flake which were prepared by rod mill.
以大米淀粉为材料，采用机械球磨法制得超微细化大米淀粉，研究球磨时间和温度对大米淀粉流变学特性的影响。
Rice starch was mechanically ground by ball milling. The rheological property of the super micronized rice starch was studied under different grinding time and temperature.
为了提高面齿轮副的强度并解决其磨齿问题，提出了弧线齿面齿轮副的一种新的加工方法，并研究其啮合特性。
To improve tooth strength and make tooth grinding implement for face gear, a new generating method of face gear drive has been proposed, and the meshing characteristics are investigated.
通过对大型振动磨机运动特性的研究分析，把其旋转系统简化为由两个柔性联轴节连接的三转子系统。
The revolving system of large-scale vibration mills is simplified into a three rotor system which is joined by two flexible coupling.
主要介绍褐煤的特性，论述了褐煤锅炉的设计要点及塔式锅炉的特点，说明了对于高水分褐煤锅炉采用塔式炉配风扇磨的优势。
It describes the advantage of using tower type matched with fan mill for lignite fired boiler-fan milling system has good drying capability and good adaptability for raw coal moisture.
提出了一种采用驱动的超硬度磨料的碗形砂轮在线修磨冷带轧机轧辊的方法，并给出了不同条件下的磨削特性。
A new on-line grinder with driving super-hard grinding grain is proposed for cold rolling mill. Its grinding characteristics on different conditions are given.
在动载三体磨粒磨损条件下，试验研究了冲击载荷的变化对铸态复相耐磨钢动载磨粒磨损特性的影响。
The influence of varying impact energy on wear resistance of dual phase cast steel has been investigated under impact three body abrasion.
用理论结合试验的方法研究了环缝磨内介质球运动规律和受力特性。
The method of combining theory and experimentation is used to study the law of movement and characteristic of receiving force of the medium - balls in annular gap mill.
利用单摆划痕法的冲击加载特性，研究了N i - P化学镀层的冲击磨粒磨损性能。
Impact abrasive wear behavior of electroless Ni-P coating was researched by means of single-pass pendulum scratching test characterized by impact loading.
试验研究了粉煤灰的细磨加工效应和细磨灰的特性。揭示了粉煤灰细磨加工活化机理。
The effect of fine process on fly ash has been studied by test, as well as the characteristic of fine fly ash. The mechanism to activate fly ash by fine process is unveiled.
介绍了大气孔砂轮磨粒的特性，针对胶辊磨砺过程的特殊性，重点分析了磨胶辊时砂轮的选择、修整及使用时解决实际问题的办。
Considering the special requirement of the grinding process of cots, highlight is given to the selection, finishing and application of grinding wheels in practice.
得出岩石在受到磨料射流的冲击下，磨粒与水体对岩石的冲击压力与岩石在水介质作用下力学特性的变化共同促使了岩石的破坏。
It has been shown that the impact pressure and changing of mechanical characteristic of rock together make it broken by abrasive water jet.
由于镁及镁合金的独特性能，其粉末及粉粒通常用球磨法、铣削法、雾化法生产，特别是铣削法用得最多。
The production technology for Mg and Mg alloy powders are:grinding milling, atomisation, melting and recycling, turning and chipping.
结果表明，用磷石膏配料，能改善生料的易磨性和易烧性，提高生、熟料的产量，并能改善熟料的凝结特性。
The results reveal that the grindability and burnability of raw meal , the quality and output of clinker as well as the setting time of clinker can be improved with the addition of phosphorus gypsum.
这类提升机对物料的种类、特性及块度的要求少；可提升粉状、粒状和块状物料、可提升磨琢性的物料；
This sort of elevator has few requirements for the kind, feature, and sizes of materials, so it can elevate materials in the state of powder, granule and clump.
通过机械球磨对马铃薯淀粉进行粉磨，采用流变仪研究了马铃薯淀粉及其不同微细化程度产物的糊的流变特性。
Potato starch was mechanically ground by ball milling. The rheological properties of differently micronized products were studied by rheometer.
在概括性地阐述分形理论、欧氏几何造型方法及离心式滚磨光整加工方法的基础上，重点分析了L系统分形造型方法和离心式滚磨加工过程中磨块运动的分形特性。
On the basis of generalizing the fractal theory, Euclid geometry mould and the discentral barrel finishing, L-System and the fractal characteristics of the grinder movement is analyzed.
在概括性地阐述分形理论、欧氏几何造型方法及离心式滚磨光整加工方法的基础上，重点分析了L系统分形造型方法和离心式滚磨加工过程中磨块运动的分形特性。
On the basis of generalizing the fractal theory, Euclid geometry mould and the discentral barrel finishing, L-System and the fractal characteristics of the grinder movement is analyzed.
应用推荐