在原油罐运行过程中，自然腐蚀、介质腐蚀和磨损腐蚀都将引起原油罐的腐蚀损坏。
During the operating of oil tank, natural corrosion, medium corrosion and erosion corrosion will make the oil tank to damage.
司太立合金是一种能耐各种类型磨损和腐蚀以及高温氧化的硬质合金。
The stellite alloys are hard alloys which can resist various wear, corrosion and oxidation at high temperature.
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
摘要介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi-arc ion plating technology and wear resistance corrosion resistance heat-proof property and absorption property of solar spectrum were also discussed.
针对PA6+60%GF的材料的磨损和腐蚀特性，我们的热流道系统选用了特殊的材料及特殊的浇口结构，以保证系统的使用寿命！
In terms of the PA6 + 60% GF wear and corrosion properties of material, we choose the special materials and special gate structure to prolong system longevity.
叶轮：严重汽蚀(特别是主叶片)、过度腐蚀、磨损、破损时，要求更换叶轮。
Impeller: Sure to change impeller if it has serious cavitations (main vanes in particular), over corrosion, wear and tear and breakage.
它具有滚压刚化表面，不仅断裂模数大、耐压强度高，而且具备良好的抗磨损和抗热气腐蚀能力。
It has a rolled, rigidized surface which gives it a high modulus of rupture and compressive strength as well as high abrasion and hot gas erosion resistance.
问题：位于中央位置的门牙是非常容易受到腐蚀的，而下颚的门牙则直接则特别容易遭受磨损。
PROBLEMS: The central incisors are most vulnerable, but those in the lower jaw are particularly affected by teeth grinding, which 8 per cent of us do unconsciously.
球从制造的陶瓷材料是极其耐腐蚀和磨损，并提供优良的性能特点。
Balls manufactured from ceramic materials are extremely resistant to corrosion and abrasion, and offer excellent performance characteristics.
而增加含硅量后的低铬白口铸铁的腐蚀磨损耐磨性将比普通白口铸铁的高。
The corrosion wear resistance of low chromium white cast iron increases when the silicon content increases in it.
一些高铬钢能通过热处理硬化，可用于抗磨坏，抗磨损，抗腐蚀需求的地方。
Some high chromium steels can be hardened by heat treatment and are used where resistance to wear, abrasion, and corrosion are required.
耐候性钢材应谨慎使用，因为表面机械磨损经常会大幅度降低其抗腐蚀能力。
Weathering steels should be used with caution as their resistance to corrosion is often significantly reduced by mechanical wear att he surface.
重型、铸造304或316不锈钢阀体具有很强的耐腐蚀耐磨损性能，能够经受最恶劣的液体泥浆和干燥物体介质的处理应用场合。
The heavy duty, cast 304, 316 stainless steel body provides corrosion and abrasion resistance on the toughest liquid slurry and dry material handling applications.
填料密封腐蚀磨损是填料密封装置失效的主要原因。
Corrosion wear is the major reason of the packing seal destruction.
高温耐腐蚀、耐磨损、耐冲刷、抗氧化。
High temperature corrosion resistance, wear resistance, scouring resistance, oxidation resistance.
车轮转向节因为进入了湿气而腐蚀，从而导致磨损的结果。
Wheel control joint corroded due to moisture ingress and worn out as a result.
最后探讨了冲击载荷下磨损与腐蚀的交互作用机理，以及冲击功对交互作用机理的影响。
The influence of impact energy on the synergy and the mutual effect mechanism between corrosion and wear were discussed.
本文对螺旋式食品膨化机螺杆由于磨损和腐蚀的综合作用引起的正常破坏以及受力情况进行了分析。
In the article, the normal damage to the screw of the spiral food expansion machine and its conditions of tolerating force because of the comprehensive action of wear and corrosion are analysed.
严重的玻璃生物淤积、理磨损和化学腐蚀可能影响感觉表面。
Also, severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface.
利用电沉积表面工程技术可以有效地降低材料的磨损与腐蚀，延长工件使用寿命。
Optimum application of electrodeposition surface engineering techniques can considerably decrease the wear and corrosion loss, and hence effectively prolong the serving life of components.
结果表明载荷与腐蚀磨损间仍然存在线性关系。
The linear relationship, with different slopes between corrosive wear and loads was confirmed.
讨论了施镀温度对镀层成分、结构和抗腐蚀磨损行为的影响。
The dependence of plating composition, structure and the behaviour of corrosive wear resistance on plating temperature is also discussed.
空心圆柱滚子轴承为应力腐蚀磨损失效。
The failure of the hollow cylinder roller bearing is stress corrosion wearing.
介绍了利用多弧离子镀工艺制备黑色氮钛膜，并对其耐磨损、耐腐蚀、热稳定性及太阳光谱吸收等性能进行了研究。
Black tin coating was prepared by multi arc ion plating technology, and wear resistance, corrosion resistance, heat proof property and absorption property of solar spectrum were also discussed.
器材腐蚀或磨损严重部位要及时的补救。
Vital parts that are corroded or abraded should be repaired promptly.
这种结构形成了抗磨损的优化表面层和抗腐蚀的钝化层，明显改善了材料表面抗磨损、抗疲劳和抗腐蚀特性。
This structure forms the passivation layer against corrosion and wear. The optimum layer against wear improves the resistance of material surface in corrosion, wear and fatigue extremely.
有机耐磨防腐涂料该涂料是由几种耐腐蚀，耐磨损的陶瓷骨料，环氧树脂，改性的聚氨脂树脂，固化剂，及少量添加剂配制而成。
Organic Anticorrosive coating The coating are preparation with a series ceramic powders, epoxy resin, modified polyurethane resin, solidification agent and a few additive.
磨浆段螺旋套主要的失效形式为高应力磨料磨损，同时伴有腐蚀磨损。
The main failure form of pulping scroll cover is high stress grinding abrasion accompanying corrosive abrasion.
磨浆段螺旋套主要的失效形式为高应力磨料磨损，同时伴有腐蚀磨损。
The main failure form of pulping scroll cover is high stress grinding abrasion accompanying corrosive abrasion.
应用推荐