直到最近，很多人认为跑步所带来的撞击或碰撞力会导致骨头轻微变形。
Until fairly recently, many thought that the pounding or impact that you get from running, for instance, deformed the bone slightly.
第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。
The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.
船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形而言，存在一定程度的滞后效应。
The rigid body motion of a struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形存在一定程度的滞后。
The rigid body motion of struck ship in collision is delayed to a certain extent, compared with local damage deformation of collision zone.
分析了用变形能网格图计算斜碰撞速度时产生误差的主要原因。
The main reason producing error is analyzed when using deformation energy square calculates oblique collision speed.
还有的原因是表把容易受外力的冲击和碰撞，造成表把的歪斜变形，会影响防水性能和操作。
The reason is that the table is easy to be affected by external shocks and collisions, resulting in a table to the skew deformation, will affect the performance and operation of water.
移动变形壁障是实车侧面碰撞试验时用来撞击试验车辆的标准试验工具。
The movable deformation counterguard is the standard test tool in vehicle crash test to impact the test vehicle from side direction.
对于变形体的碰撞检测算法，本文从两个方面对传统的算法进行改进。
This paper has tried to make improvements from two aspects for the collision detection algorithm of deformable objects.
同时也分析了冲头对圆管碰撞时，导致圆管由弹性变形向塑性变形转化学的临界速度值。
We also analyse the critical velocity, at which elastic deformation translate to plastic deformation when the bullet impact the tube.
根据求得的时域内抽油杆柱受力变形值以及与油管柱碰撞接触力，计算了抽油杆柱动强度和扶正器安放位置。
The dynamic strength of rod string and the mount position of centralizer were calculated, according to the acquired deformation of rod string and its impact contact force with tube in the time domain.
采用有限元数值计算方法，研究冷喷涂材料改性过程中铜粒子与铜基体非垂直碰撞的变形行为。
Based on developed numerical simulation method, the impacting behavior of copper particle colliding copper substrate in process of transforming material property is investigated.
龙泉关韧性剪切带的变形特征反映了五台山晚太古代碰撞造山带的构造演化。
The deformation characteristics of Longquanguan DSZ reflect the tectonic evolution of the late Archaean collision orogenic belt in Wutaishan area.
常见的事故类型通常都伴随着车辆的碰撞变形，事故车辆动能的一部分在碰撞中转化为变形能。
Traffic accident will generally lead to vehicle's impact crash, and part of kinetic energy of the damaged vehicles is transferred to deformation energy.
车体前部碰撞变形产生的脚舱侵入量对人体下肢的损伤会产生一定的影响。
Variety of footwell intrusion induced by impact deform of car forepart will influence lower extremity injuries severity to a certain degree.
这些伸展构造很显然是扬子克拉通和华北克拉通在三叠纪碰撞时，大别山造山带前陆位置岩石圈弯曲导致地壳上部产生非弹性变形的结果。
Such structure in the collision foredeep of the Dabieshan Orogen was resulted in inelastic extensional deformation of the conver side of the flexed plate aroused by lithospheric flexure.
沿江前陆盆地形成于扬子与华北板块碰撞活动中的前陆变形带上。
The around-Yangtze foreland basin occurred in a foreland deformation belt caused by the collision between the Yangtze and North China plates.
分析求解了在碰撞过程中汽车变形的位移、速度、加速度和碰撞力；
The displacement, speed, accelerated speed and collision force during collision are analysed and solved.
车辆被动安全系统主要包括了吸能的车前端碰撞区、加固防止变形的车仓、车门、安全带系统、安全气囊系统等等。
Passive safety system comprises deformable and energy-absorbable car crash zone, reinforced passenger cabin and pillar, seatbelt system and airbag system.
通过计算绝热压缩温升和畸变形能沉积产生的温升，给出熔化判据，定量估计出了在小碰撞角下爆炸焊接界面熔化层厚度。
Throughcalculation of temperature rising callused by them, melt criterion is given, the thickness of melted layer near explosive welding interface with small collision Angle is estimated.
碰撞颗粒传热是基于球体接触时的弹性变形的分析得到的。
The heat transfer between the particle-particle collisions is analyzed based on the elastic deformation of the spheres during their contact.
准噶尔盆地南缘的晚新生代构造变形被认为是天山地区对印度和欧亚板块的碰撞与会聚作用过程的构造响应。
The late Cenozoic deformation is considered as a response to the India and Eurasia plate collision and continuous compression.
使用现有任何一种滚磨设备加工滚柱轴承保持架都存在零件间的碰撞、变形或效率低等缺点。
There are many defects of impacting between parts, parts deforming or lower efficiency in using any kinds of present rolling grinding equipments to remove the burr on roller bearing maintainer.
使用数值方法模拟考虑接触变形的梁受到球横向弹性碰撞的全过程。
The elastic impact procedure of a beam under lateral impact of ball was simulated by using numerical method in which the contact deformation was considered.
在服装的变形过程中，加入有效的碰撞检测技术是对服装变形技术的有力支持。
During garment deformation, effective collision detection technology is a powerful sustentation for deformation technology.
高压开关在合闸时，触头碰撞会产生很大的冲击力，不仅对操动机构造成很大震动、使触头及杆件弯曲变形，而且会造成碰撞后，触头产生弹跳。
It not only makes the operating mechanism shocked hardly and the contactor and poles distorted, but also cause the bounce of contactor after the impact.
碰撞接触容易引起塑性变形，这种变形与踏面形状无关，应注意消除轮轨间的不平顺。
The plastic deformation would more easily occur due to the impact contact, but it is independent to the shape of tread. However, to eliminate the irregularity between the wheel and rail is necessary.
本文采用动力接触有限元法分析了强夯对地基土的冲击碰撞过程。夯击过程中，夯点周边地基土存在局部大变形现象。
This paper uses dynamic contact FEM to analyze impact and collision course of dynamic compaction to foundation soil.
对于一维碰撞，根据碰撞后车辆的滑移距离和车辆的塑性变形量，反推计算出车辆碰撞后的速度和碰撞前的接触速度；
For collinear collision, the preceding collision velocity and post collision velocity are calculated on the basis of the slippage distance and unreturnable distortion of collision vehicle;
自碰撞检测是可变形体模拟过程中最耗时的环节，提出一种使用图形硬件的快速算法。
Self collision detection is the most time consuming process in deformable object simulation. In this paper, a novel algorithm is presented for performing self collision using graphics hardware.
自碰撞检测是可变形体模拟过程中最耗时的环节，提出一种使用图形硬件的快速算法。
Self collision detection is the most time consuming process in deformable object simulation. In this paper, a novel algorithm is presented for performing self collision using graphics hardware.
应用推荐