为了研究阳极氧化工艺条件对硬质氧化膜的厚度、耐蚀性、表面形貌的影响。
The effects of anodic oxidation process on thickness, corrosion resistance and surface morphology of hard oxidation film were studied.
加之钨钴合金本身的高硬度和高强度可以与硬质氧化膜较好地相配合，能有效地减小应力集中，膜层硬度也因此获得明显提高。
Besides, the hardness of W-Co alloy was compatible with the hard anodizing film. Stress concentration was effectively reduced, therefore the fil...
硬质合金刀具的氧化磨损主要发生在刀具前刀具和后刀面的磨损边缘区。
Oxidation wear appeared at the wear edge of rake face and flank face of cutting tool.
司太立合金是一种能耐各种类型磨损和腐蚀以及高温氧化的硬质合金。
The stellite alloys are hard alloys which can resist various wear, corrosion and oxidation at high temperature.
对工业纯铝在硫酸溶液中采用硬质阳极氧化的方法制取氧化膜的工艺进行了研究，在传统硫酸硬质阳极氧化工艺的基础上进行了改进。
By hard anode oxidation, the film is obtained when industrial pure aluminum is in sulfuric acid solution, make the improvement in the traditional sulfuric acid hard anodizing craft foundation.
对铝合金LD 7硬质阳极氧化工艺进行了研究，提出了适合ld 7铝合金的工艺配方与工艺参数。
A hard anodic oxidation technique of forge aluminum alloy LD7 for piston was studied. The prescription and parameters of the technique were set up.
采用自制脉冲恒流电源，研究了缝纫机零部件（2A12）在低硫酸浓度下的脉冲恒流硬质阳极氧化工艺。
The hardened anodic oxidation coating on sewing machine components(2A12)was investigated in different sulfuric acid density solutions with special apparatus.
传统铝的硬质阳极氧化需要较低的温度和较高的电压。
Traditional aluminum hard anode oxidation needs lower temperature and higher voltage.
简单介绍了硬质阳极氧化的工艺原理及转杯硬质阳极氧化的工艺流程和工艺装备。
The paper introduces the theory of the hard anodic oxidation and the technological process of the hard anodic oxidation of the rotor and the process equipment.
提出将脉冲技术应用于铝合金硬质阳极氧化。
Pulse current technique was adopted in hard anodic oxidation of aluminum alloys.
具有高正电荷，小离子半径的阳离子适合形成硬质玻璃，而那些低氧化态、大离子半径的阳离子则适合于形成软质玻璃。
The cations with high positive charge and small ionic radii are suitable to forming hard glasses, and those with low oxidation state and large radii are suitable to forming soft glasses.
着重评述了交直流叠加，脉冲电流和交流电源在硬质阳极氧化研究中的进展情况。
The progress of hard anodizing investigation employing A. C. superimposed on D. C. , pulse current and alternating cu…
硬质阳极氧化后表面粗糙度都增加，且经T6处理后的表面粗糙度更大、增长更快；
After hard anodizing, surface roughness increases, the surface roughness of artificial aging (T6) is bigger and grows faster.
经固溶处理和自然时效的铝铜合金可以进行硬质阳极氧化。
Hard anodizing film could be obtained on Al-Cu alloy surface which had been treated with solid solution treatment and natural aging.
本发明提供了一种在低温条件下，采用硫酸铵回收硬质阳极氧化过程中废硫酸的新方法。
The invention provides a novel method for recycling waste sulfuric acid in the oxidation process of hard anode using ammonium sulfate at low temperature.
在适当阳极氧化工艺条件下，颗粒增强铝基复合材料表面可以制得优良耐蚀性的硬质阳极氧化膜。
In a given anodic oxidation condition, a hard anodic oxidation film can be obtained on the surface of aluminum - matrix composite with an excellent anticorrosion.
研制了以硫酸、草酸、酒石酸为主要成分的铝合金硬质阳极氧化电解液。
An electrolyte solution with sulfuric acid, oxalic acid and tartaric acid as the main component for aluminium alloy hard anodization was developed.
该工艺在提高铝硬质阳极氧化槽液温度、增加膜的硬度和节能等方面都县有很大的实用价值。
This technology holds great practical values in raising the bath temperature for hard anodic oxidation of aluminium, improving t…
简单介绍了硬质阳极氧化的工艺原理及转杯硬质阳极氧化的工艺流程和工艺装备。
The paper introduces the theory of the hard anodic oxidation and the technological process of the hard anodic oxidation of the rotor...
该工艺在提高铝硬质阳极氧化槽液温度、增加膜的硬度和节能等方面都县有很大的实用价值。
This technology holds great practical values in raising the bath temperature for hard anodic oxidation of aluminium, improving the film hardness and energy saving etc.
双曲面烹饪：两个不沾和无涂层，硬质阳极氧化铝锅烹调的多功用性最大化。
Dual cooking Surfaces: Both nonstick and uncoated, hard-anodized aluminum POTS maximize cooking versatility.
这既与涂层的耐磨性、表面粗糙度和抗氧化性能有关，也与硬质合金A的硬度、韧性和抗弯强度有关。
This is related not only to the wearability, the surface roughness and the oxidation resistance of coating but also to the hardness, the toughness and the bending strength of carbide alloy A.
超微氧化镍粉作为一种纳米金属材料，在很多领域都有广泛的应用，可以作为催化剂、电池材料、硬质合金粘结剂等。
Ultrafine nickel oxide powder, a nano-metallic material, has been used in many areas, such as catalysts, battery materials, adhesives and other hard alloy.
超微氧化镍粉作为一种纳米金属材料，在很多领域都有广泛的应用，可以作为催化剂、电池材料、硬质合金粘结剂等。
Ultrafine nickel oxide powder, a nano-metallic material, has been used in many areas, such as catalysts, battery materials, adhesives and other hard alloy.
应用推荐