从结构破损分析着手，探讨了结构保护的思路、目标和方法。
By starting from structure failures, thinking, the object and method for structure protection are discussed.
此研究可为工程检测、破损分析及应采取的安全措施提供一定的参考。
This article can offer paradigm to the engineering detection, damage analysis and the safety facility to the bridge.
以株洲冶炼厂锌精矿仓厂房受硫酸破损为例，有针对性地进行破损分析和加固处理研究。
Taking the zinc fine-ore bin which is corroded by the sulfuric acid as example, this paper made relevant breakage analysis and reinforcement research.
如果你找不到好的跑鞋商店，以下是如何分析你鞋的方法。首先为了分析你的鞋，找一双穿破的鞋，看看鞋的鞋底，注意破损的模式。
If you notice that your shoes are wearing in the normal pattern, from the outside of the heel to the ball of the foot, that means you are a normal pronator.
重点分析炉身破损的原因。
Emphasis is laid on analyzing the causes of the stack damage.
本文对电解槽破损原因进行了综合分析，探讨延长电解槽寿命的措施。
This article analyses the reason of the trough breakage and discusses the measures to prolong its service life.
分析了切削硬岩时的刀具磨损和破损特征。
根据罐式煅烧炉结构及硅砖的特点，分析罐式煅烧炉破损原因，探讨延长罐式煅烧炉炉龄的途径。
The analysis of the damaged reason for pot type calcine furnace and the probe into the path which prolong the age of the pot type calcine furnace.
根据试验数据，对切削过程中产生的振动信号进行了分析与处理，提出了能过反映刀具破损的特征量。
According to experiment data, as for vibration signals sent out during cutting, is used to analysis and disposal, and characteristic value reflecting tool breakage is extracted.
在应用弹性理论对刀具破损进行应力分析的基础上，指出提高刀具寿命的措施。
Based on the stress analysis for cutter damage with elastomechanics theory, measures for improving cutter life are proposed.
我们在分析破损材料时，通常需要先做直观判断，再做实际试验。
When we are doing and analysis of a damaged material, usually it requires intuitive judgment followed by real-life testing.
分析了切削过程中切削力的变化情况，并指出负剪切现象对刀具破损的影响。
Analysis is conducted for the variation of cutting force during the cutting process and the effect of negative shearing on the cutter damage is pointed out.
通过SEM和电子探针分析，提出了钙熔盐电解过程石墨阳极的破损机理。
With the analysis of SEM and electron probe, the destroying mechanism is put forward.
本文在综述混凝土强度破损检测技术的同时，重点对每项技术的操作要点进行了归纳分析。
This paper summarizes destructive testing techniques for concrete strength focusing on making an induction and analysis on main operating points for each technique.
用有限元和断裂力学方法分析大型整体机翼下壁板的破损安全特性。
The fail safety of large integrally stiffened panel is investigated based on the linear elastic fracture mechanics and finite element analysis.
分析了厚料冲孔用冲头破损的主要原因，针对这些易产生的问题，设计了一种冲头，并说明了其特点。
This paper analyzes main reason why thick sheet piercing punch is easily destroyed, and design a new punch to above-mentioned problem and introduces its some characters.
通过分析热轧窄带钢用精轧工作辊破损形式，阐述其生产及使用要点、使用效果。
This paper describes the broken forms of precision roll, elucidates the production, main points and effect of application of the roll.
通过对锻造加热炉炉门破损原因的分析，制定了延长炉门使用寿命的技术措施，研制了密度低、抗热震性高的耐火浇注料。
Based on the damaging analysis of forge heating furnace gate, the technology measures are made to prolong the service life of the furnace gate.
分析了破损路面图像的像素点区域特征，针对不同区域提出加权邻域滤波和自适加权中值滤波算法。
By analyzing the weighted neighborhood filter and adaptive weighted median filter are proposed in this paper for the differences.
对焦炉钢筋混凝土结构件破损的原因进行了分析并介绍了加固修补的方法。
The cause of damage of annoured concrete framework in coke oven is analyzed, The method to repare and strengthen it introduced.
为了延长高炉大钟的使用寿命，集中力量对大钟的破损原因进行了分析，并提出了相应的改进意见。
The bell damage reason is analyzed and the corresponding improvement measures are put forward so as to prolong the service life of the blast furnace large bell.
通过药品颗粒垂直空气输送的实验，分析了回旋气流对药品颗粒破损的影响。
The effects of swirling flow upon damage phenomenon of pharmaceutical granule were investigated by performing the vertical pneumatic conveyance of pharmaceutical granule experimentally.
本文分析了铝电解槽的破损形式，提出了铝电解槽破损的检查与修补方法。
The text analyzes the damage types of aluminum reduction cell, and proposes the methods to check out and repair the aluminum electrolytic plots.
针对焦炉抵抗墙在热负荷作用下的破损情况，分析了其破损原因，介绍了在不停产条件下对热状态结构的加固措施。
This article focuses on the damage of the resistance wall of coke oven with load. The causes of damage are studied and reinforce measures introduced.
采用有限元方法分析由于防火涂料局部破损而造成的火灾下钢构件内的三维热传导问题，给出构件内温度的分布规律。
The Finite Element Approach is used to analyze the temperature distribution of steel members covered by fire insulation subjected to fire.
介绍了鸡西穆陵河大桥桥面破损原因的调查与成因分析，对维修方案做出了详细的技术经济分析。
The paper introduced the investigation and analysis on damage reasons of deck of Muling River Bridge, and compared two conceivable repair projects from the aspects of technology and economy in detail.
对刀片破损断口进行能谱分析，证实刀片与粘屑相互粘结有对方材料元素。
According to the EDX analysis on the break area of blade, it's found that the bits and blade glue the other side material elements of each.
利用杆件结构有限元动力分析计算，并通过模型梁试验，建立起简支梁在附加荷载作用下振动特性与破损模态之间的关系。
Through beam structure finite unit dynamic analysis and experiment of RC model beam, we build the relationship between beam bridge attached load vibration characteristics and damaged model.
利用杆件结构有限元动力分析计算，并通过模型梁试验，建立起简支梁在附加荷载作用下振动特性与破损模态之间的关系。
Through beam structure finite unit dynamic analysis and experiment of RC model beam, we build the relationship between beam bridge attached load vibration characteristics and damaged model.
应用推荐