纤维混杂可以改变材料的破坏模式。
岩石顺层老滑坡群的破坏模式；
不同的破坏模式对材料强度影响很大。
The failure mode also greatly influences the mechanical properties of material.
高边坡老坍塌体和斜坡滑坡的破坏模式；
The failure mode of the peak acontaining skew trees fallows big landslip.
结果显示在不同冻融条件下试件的破坏模式不同。
It was shown that different failure patterns were caused by different freezing-thawing conditions.
对于每一种破坏模式，给出了受剪承载力计算公式。
For each failure mode, an explicit formula is derived for the prediction of shear strength.
通过工程实例，验证了修正折线破坏模式是有效可行的。
Succinct has proved the two-broken line modified failure mode is effective and feasible.
本文针对剪切破坏的主要破坏模式纵向水平剪切粘结破坏。
In this paper, shear failure is mainly discussed, especially the horizontal shear-bond failure.
静力测试提供了一种检测飞机机体结构破坏模式以及静强度的试验方法。
Static trials represent an experimental test method of defected mode and static strength of a plane construction.
但岩体动力破坏模式的建立和定量的力学分析还需更多研究。
More researches are badly needed to establish dynamic failure modes of rock mass and to carry out quantitative mechanical analysis.
本文提出了一种可以考虑不同破坏模式的二维混凝土本构模型。
A constitutive model for concrete considered different failure modes is proposed in this paper.
文中给出了墙体、地基及滑动层等单元的破坏模式及处理方法。
The failure hypotheses and handling methods of brick masonry, soil foundation and slip layer are given.
破坏模式正确与否关系到土压力研究和土钉支护设计的准确程度。
The accuracy degree of the study on the soil pressure and the soil nailing design are determined by the failure mode.
在此基础上，讨论了边坡的破坏模式及土体由于开挖作用的影响。
On this basis, discuss the failure modes of the slope and the impact of excavation soil.
总结了路堑高边坡的变形破坏模式，并对其变形破坏机理进行了分析。
The deformation failure modes of high cut slopes are summarized, and analyzing the deformation failure mechanism.
也可能排除某个日期进行模式化，以通过检测特殊性来避免破坏模式。
It is also possible to exclude a date from modelisation to avoid corrupting models by detectingspecificities.
结果清楚地显示，深承台板的载荷传递机制与相应的双向剪切破坏模式。
The results clearly illustrate the load transfer mechanism in the deep pile cap and the subsequent failure mode of two-way shear.
对影响顺层岩质边坡稳定性的主要因素及其变形破坏模式进行了研究总结。
The major influence factors of stability and the deformation and failure modes of consequent bedding rock slope are summarized.
根据极限平衡条件，推求了地基整体剪切破坏模式的岩石地基极限承载力。
With the limit equilibrium condition, the ultimate bearing capacity of rock foundation was deduced under general shear failure.
本文对悬膜空间结构的一种破坏模式——膜的塑性拉伸失稳破坏进行探讨。
This paper investigates one of the failure modes of suspension membrane structures-plastic tensile collapse of the membrane.
通过与GPS技术的对比，分析了LBS物流跟踪系统的低端市场破坏模式。
Comparing with GPS technology, the mode of Low-end Disruption of LBS-LTS is analyzed.
明确加固梁具有两种不同破坏模式，其破坏是由钢板端部的主应力大小决定的。
Two different kinds of failure patterns have been observed and the failure of strengthened beam is attributed to the principal stress at the end of steel plate.
在岩体工程分析中，合理地判别岩体的破坏模式及其相应的强度有着重要的意义。
It is important to judge reasonably the failure modes and their corresponding strength in the engineering analyses of rock mass.
方法按极限平衡理论中的平面滑动破坏和楔体破坏两种破坏模式进行稳定性分析。
Methods Based on the two failure mode of plane and wedge sliding destruction of the limit equilibrium theory, rock slope stability is analysed.
在此基础上，确定了边坡岩体的破坏模式，为边坡岩体力学分析提供了重要的基础。
On this basis, it determines the failure mode of the slope rockmass and presents an important foundation for the rockmass mechanics analysis.
本文针对海上平台的工作环境及结构形式特点分析探讨了构件的其它一些破坏模式。
Based on the working environment of offshore platform and structural feature, other failure modes of structure are researched in this paper.
通过跟踪结构杆件的破坏顺序以及结构杆件重要性的变化，确定结构最重要破坏模式。
By tracing the change of the index of member importance due to failure of members, the most important failure mode is determined.
在船舶碰撞和搁浅中，薄壁结构在轴向压力条件下的压溃破坏是一种重要的破坏模式。
During the ship collision and grounding, the crushing collapse of thin-walled structure subjected to compressive load is one of the important failure modes.
对于那些长期经受交变载荷作用的机械零件和工程构件，疲劳破坏是一种主要的破坏模式。
Fatigue damage is the main destroy mode for the machinery parts and engineering structures under alternate loading over a long period of time.
对于那些长期经受交变载荷作用的机械零件和工程构件，疲劳破坏是一种主要的破坏模式。
Fatigue damage is the main destroy mode for the machinery parts and engineering structures under alternate loading over a long period of time.
应用推荐