垃圾转运站范围提供的直流电动机控制整个范围。
The RTS range provides control for the whole range of DC motors.
其次，论文对无刷直流电动机控制系统的部分关键问题进行了理论分析。
Secondly, this paper analyses theory about some critical problems on BLDCM controlling system.
介绍基于MC33035高压无刷直流电动机控制器尖峰电流的几种抑制方法。
This paper introduces the suppression methods of spike current in the high voltage brushless DC motor controller based on MC33035.
系统的测试结果表明，基于DSP的无刷直流电动机控制系统，可以实现对电动机的全数字化双闭环控制。
The testing results show that the control system based on DSP can implement closed loop control the DC motor.
本文采用了PC机、GMC2407运动控制专业平台来构成一个基于DSP的无刷直流电动机控制的试验平台。
In this paper, a brushless motor control platform which is based on DSP and made of PC and GMC2407 is adopted.
ML4428就是一种无位置传感器的无刷直流电动机控制器，是目前较先进的，集成度高的控制器，文中作了较详细的介绍。
ML4428 is a typical permanent magnet BLDCM controller without position sensor; it is an advanced high integrated controller, which was described in detail in this paper.
设计了以TMS320 LF 2407作为中央处理器的无刷直流电动机控制器，并将该控制器应用于混合动力汽车的驱动系统中。
A design of hybrid electric vehicle (HEV) brushless DC motor controller based on TMS320LF2407 with energy regeneration, which is used in the drive system of the HEV.
利用PIC系列芯片进行低成本直流电动机控制系统的设计，能够简化系统构成、降低系统成本、增强系统性能、满足更多应用场合的需要。
This new family of PIC enables cost-effective design of controllers for DC motors which can fulfill more conditions, consisting of fewer system component, lower system cost and increased Performances.
最后，文中还探讨和设计了一套基于TMS320 LF 2407 ADSP为控制核心的燃油泵用无刷直流电动机控制驱动器设计方案。
Finally, another set of controller based on TMS320LF2407A DSP is also discussed and designed to satisfy the development tendency of aero fuel pump system.
实验结果表明：在网络控制系统中无刷直流电动机转速响应快速，运行平稳，证明了这种新型控制系统的有效性和可行性。
The experimental result shows BLDCM response rapidly and run stableness in networked control system and proves the validity and feasibility of this control system.
以SPMC65 P 2404 A单片机为核心，设计了一种用于电动自行车的无刷直流电动机调速控制系统。
The design of the speed control system of brushless DC motor based on SPMC65P2404A is implemented, which used in the electric-bicycle.
本文论述了宽调速比直流电动机无火花换向区曲线分散的基本原因，并给出工程控制措施。
The paper introduces the basic cause of the sparkless space dispersion for DC motor with the wide adjustable speed ratio, and gives the control methods of projects.
根据无刷直流电动机的特点和DSP芯片的功能，提出了基于DSP的控制方案。
According to the characteristic of BLDCM and the function of the chip, sensor control solutions which are based on DSP technology are presented.
文章重点阐述利用无刷直流电动机构建的井下压力闭环实验装置和以无刷直流电动机为控制核心的软件平台。
The paper places emphasis on the closed-loop system of pressure based on BLDC motor and the correlative software.
卫星姿控飞轮是由三相轮流换向无刷直流电动机驱动的，采用力矩控制(电流反馈)模式。
Satellite attitude control flywheel is driven by three-phase alternate commutating brushless DC motor, schema of which is torque control model (current feedback).
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
介绍了无刷直流电动机的控制原理，给出了系统设计的整体方案，并详述了硬件电路和软件程序设计。
In this paper, we introduced the control theory of brushless DC motor, and proposed the design scheme, software method and hardware electric circuit for whole system.
根据无刷直流电动机的特性，讨论了数字pid控制系统的设计原理和实现方法。
The design principle and realization method of the digital PID control system are discussed according to the characteristic of DC brushless motor.
本文正是基于这一考虑，对无刷直流电动机的控制技术与控制方法进行研究。
In view of above-mentioned reasons, this thesis makes a detailed study on the control technology and methods to BLDCM.
首先，在所搭建的试验平台上，用软件设计了无刷直流电动机的全数字双闭环调速控制，验证了DSP控制器的高性能、高精度等优点。
First, speed control of motor based on DSP is designed with this platform, which approves good performance and good precision of DSP controller.
介绍一种用于人工心脏轴流式血泵的无位置传感器无刷直流电动机闭环调速控制系统的电路设计。
A kind of closed loop timing control system based on position-sensorless control for axial blood pump of artificial heart brushless DC motor is introduced in this paper.
论文针对无刷直流电动机无传感器控制中存在的问题，分别从电机的换相、闭环控制和抗干扰等方面来探讨永磁无刷直流电动机的无传感器控制。
In allusion to the key problem on the control of BLDCM, the thesis discuss some methods about control of it in aspects of commutation of motor, closed-loop control and the disturbance restraint.
本文研究了三层对角回归神经网络(DRNN)用于直流电动机实时控制的方法。
In this paper, three layers of DRNN is used in the real - time identification and control of DC motor.
但是，无刷直流电动机运行中存在转矩脉动问题，对实现更精确的位置和更高性能的速度控制有极大影响。
But the BLDCM has the disadvantages of torque pulsation, which is in the way of achieving accurate position and speed of higher performance.
在无刷直流电动机高性能速度跟踪系统中，由于PI控制的滞后性，无法根据未来动态行为产生较为理想的PWM波形。
In the environment of high-performance drives, the PWM controller can't produce a fine PWM waveform according to the future dynamic behavior, due to the lag of PI regulator.
设计了基于可编程控制器PLC的程序控制系统、直流电动机的驱动控制系统和数字显示系统。
The program controlling system based on PLC , the drive system for controlling DC motor and the digital showing system has been developed in present work.
研究基于智能功率模块IPM构成的永磁无刷直流电动机新型控制器。
A new type of controller of PM brushless DC motor based on IntelligentPower Module (IPM) is developed.
结果表明此无刷直流电动机的网络控制方案可行，为实现更复杂的远程控制提供了参考。
The result shows that the network control of brushless DC motor comes true, it provides reference for the more complex long-distance control.
介绍了基于单片机8051PWM 控制的电动机原理，阐述了8051与直流电动机构成的电机可逆控制和不可逆控制的实现过程。
This paper introduces the principle of electromotor based on single chip computer 8051PWM, and the realization process of reversible control and non-reversible control.
介绍了基于单片机8051PWM 控制的电动机原理，阐述了8051与直流电动机构成的电机可逆控制和不可逆控制的实现过程。
This paper introduces the principle of electromotor based on single chip computer 8051PWM, and the realization process of reversible control and non-reversible control.
应用推荐