元器件的可靠性是实验电路可靠性的基础。
The reliability of experimental circuit is based on the reliability of the components.
同时使用过流和短路保护电路,提高电路可靠性。
At the same time, the over current and short were adopted to protect circuits and improve circuit reliability.
可靠性容差设计是电路可靠性设计的重要组成部分。
Reliability tolerance design is an important part of circuit reliability design.
本文介绍了该系统的构成及其工作原理,并提出了提高电路可靠性的措施。
The system constitution and operating principle are described in this article. Measures to increase its reliability are also proposed.
理论计算和实验结果表明这种设计相比传统电路可靠性和测量精度有显著提高。
Theoretic calculating and experimentation result prove that this design has more reliability and collecting precision than the conventional analog.
本文分析了单粒子辐射对集成电路可靠性的影响,特别是对SRAM存储器的影响。
The influence of single particle radiation to IC reliability, especial to SRAM, is analyzed.
在SI3016芯片与公用电话网接口电路的设计上,采用SI3016手册推荐电路并且分析了电路可靠性。
SI3016 manual recommends using circuit analysis and reliability of the circuit. Finally, the implementation of encryption algorithm based on the hardware.
本文介绍了一种IGBT的驱动与过流保护电路,该电路可靠性高,能很好地解决IGBT的驱动与过流保护问题。
This paper presents a drive and overcurrent protection circuit of IGBT. This circuit has high reliability. It can solve the problem of drive and overcurrent protection of IGBT very well.
降额设计是电路可靠性设计中的一种常用方法,通过降额设计可以达到降低器件基本失效率、提高产品使用可靠性的目的。
Through derating design, it can derate the basic failure rate of the components and improve the useing reliability of the product.
运算放大器广泛应用于电路设计中,其可靠性指标直接影响电路系统的性能。
Operational amplifiers are widely used in circuit design its reliability is of great importance to the performance of circuits.
逆变器主电路的可靠性是变频器等功率转化装置安全合理使用的保证。
The reliability in power circuit of inverter is assurance for VFD and other power transfer application.
基于该数学模型,优化设计了高可靠性、高稳定性的信号调理电路,并在聚焦元件自动测量系统中得到了实际应用。
Based on this mathematics model, the optimum signal-processing circuit, having high reliability and high stability, is designed and applied to the automatic measurement system of the focusing units.
介绍一种旨在提高信号传输可靠性而设计的信号转换电路,它将电压信号变换成电流信号进行传输。
This paper introduces signal switchover circuit that transforms voltage signal to current signal in order to improve signal reliability.
将单片机和现场可编程逻辑器件FPGA结合运用,电路简单,控制容易,可靠性强。
Combining single-chip computer and FPGA(field programmable gate grray), makes simple electric circuit, easy control strategy and high reliability.
实践表明,该电源简化了电路,降低了成本,提高了运行可靠性,且简易可行,调节方便。
The experimental results prove that the power supply simplifies the circuit, reduces the cost and improves the operation reliability, moreover it is easy to realize and regulate.
在硬件电路设计和印刷电路板设计过程中,采取一系列措施对系统进行了可靠性设计。
During the design of hardware circuits and printed circuit board, we take a series of measures to design the reliability of the system.
在简要论述集散型控制系统可靠性理论的基础上,提出放大器硬件电路的可靠性设计。
On the basis of discussing the reliability theory by total distributed control systems, it puts forward the reliability design of series hardware circuit.
给出了设计可靠性的建模方法和用数字仿真评估设计可靠性的模型方法和仿真过程并给出了一个典型电路的仿真实例。
The model and method for estimating circuit design reliability by using digital simulation are established. A simulation example of the typical fuze circuit is given in this paper.
具有电压调节范围宽,电路简单,输出稳定,可靠性强,人机交互接口优良,应用范围广泛等特点。
And it has the features of wide range regulation of voltage, simple circuit, output stability, reliability, excellent interactive interface, being widely used and so on.
硬件电路简单,可靠性高,抗干扰能力强,是一种比较理想的晶闸管触发装置。
The hardware circuit is simple, and it has strong reliance and anti-interference ability, which is a kind of ideal SCR trigger.
同时,简化电路,提高减摇鳍的可靠性和抗干扰能力。
Besides, simplify the circuit, improve dependability of the stabilizer and interference-free ability.
IBMPC机与单片机通讯的硬件电路、软件接口以及提高通讯可靠性的措施。
IBM PC and single chip microcomputer communication hardware circuit, software interface and measure to improve reliability of communication.
提供了实验中的关键波形,说明该电路具有足够的可靠性。
The crux experiment waveform offered shows that the circuits have high reliability.
该系统有许多优点,如准确度高、可靠性好、电路结构简单、成本低等,故必将有其广泛的应用发展前景。
The system has a lot of advantages: high accuracy, high reliability, simple circuits configuration, low cost and so on, therefore it must have widely development future.
采用“断电”停止可提高高空作业车紧急停止电路的可靠性。
Reliability of emergent stop circuit of aerial platforms can be raised by using "cut off" stoppage.
面积优化通过资源共享技术实现,并使用同步电路提高设计可靠性。
The usable floor space is optimized by source sharing technique, and the reliability of design is improved by using synchronic circuit.
该电路结构简单、性能稳定、可靠性高。
The circuit has simple construction, stable performance and good reliability.
这一研究将为VLSI电路器件的严格筛选、故障诊断及定位、VLSI电路的可靠性研究提供新的理论依据和检测方法。
This study offers a theoretical basis and noise detection method for VLSI circuit components selection, faults diagnosis and localization, and reliability analysis.
确保可逆电路的正确性与可靠性,错误检测必不可少,错误定位难度更高。
To ensure the validity and liability of the reversible circuits, fault detection and fault localization are necessary.
该电路结构简单,可靠性高。
应用推荐