你可以检查几个太强了那些对电磁铸造页。
对电磁铸造过程温度场进行了理论推导及数值分析。
The theoretical analysis and numerical simulation of temperature distribution in electromagnetic casting procedure.
结合生产实际情况，设计出工业上实用的低频电磁铸造铝合金结晶器。
The industrial practical crystallizer for al alloy in low-frequent electromagnetic casting was designed based on the above mentioned idea.
采用互感耦合模型对电磁铸造中的液柱高度和弯液面形状进行了数值计算。
The height and shape of the electromagnetically supported column of molten me -tal in electromagnetic caster was calculated by the coupled circuit method.
相对于常规直接水冷铸造，低频电磁铸造提高铸态拉伸强度极限和延伸率。
And the ultimate tensile strength and elongation of low frequency electromagnetic cast billets are greatly increased.
分析了电磁铸造铝合金铸坯的表面和内部质量，并与普通连续铸造铸坯进行了对比。
The surface and inner qualities of aluminum alloy ingot by electromagnetic casting (EMC) have been investigated and compared with those of the direct casting (DC) one.
为了获得高质量的连铸坯，提出了在连铸结晶器外施加复合电磁场的电磁铸造方法。
In order to obtain high quality casting metal, a new casting process, i. e.
电磁铸造技术是建立在电磁流体力学基础上，并与冶金工程相结合的先进材料加工方法。
Electromagnetic casting (EMC) is an original material processing technology and a comprehensive subject based on magneto-hydrodynamics (MHD) and combined with metallurgical engineering.
针对钢密度大、电导小的特点，提出并论证了采用复合感应器系统进行钢电磁铸造的新方法。
Based on the high density and the low electrical conductivity of steel, the new compound inductor system technology of steel electromagnetic casting was carried out.
将该控制模型应用于计算机控制系统，在小型电磁铸造设备上可以精确、稳定的控制结晶器内液位。
When the model is applied to computer control system, the liquid height in the mold is controlled stably and accurately in micro-type electromagnetic casting equipment.
在结晶器外套材料的不同情况下，对低频电磁铸造铝合金过程的电磁场进行了三维有限元数值模拟。
A 3d FEM numerical simulation of electromagnetic field in the crystallizer with different outer sleeves materials for al melt in low-frequent electromagnetic casting were conducted.
设计了电磁铸造的基本设备，研究了小型扁锭的铸造工艺和成型的基本规律，测量了电磁场分布和液柱高度与形状。
Essential equipment of electromagnetic casting (EMC) has been designed, and EMC process for sma1l square ingot and the shaping behaviour of liquid meta1 has been investigated.
为了提高高温合金母合金锭的内在质量，提出了在高温合金真空熔铸的凝固过程，施加电磁搅拌的真空电磁铸造技术。
In order to improve the inner quality of superalloy master ingots, a technology of vacuum electromagnetic casting was developed for the superalloy, I.
在电磁搅拌引起的强烈混和对流作用下，熔体的动态凝固过程不同于常规铸造时的静态凝固过程。
Under vigorous convection caused by intense electromagnetic stirring, the dynamic solidification process of melt is quite different from that of conventional casting which is relatively static.
在此基础上进行了以电磁泵充型为技术核心辅之以合理的铝液熔化、净化工艺的坦克发动机缸盖铸造新工艺研究。
On these basis, we have studied the new casting technique of the tank's engine top which poured by the electromagnetic pump associated with rational melting and purifying process.
研究了低频电磁半连续铸造7A60合金铸锭的合金元素在晶内的固溶状况和力学性能。
The intracrytalline solubility of alloy elements and mechanical properties of 7A60 Al alloy billets cast by low frequency electromagnetic casting were investigated.
铝电磁铸轧系统是涉及机械、电气、铸造和加工等多领域的非线性复杂系统。
The aluminum electromagnetic roll-casting system is a nonlinear complex system because of it involves machine, electric, casting and processing and so on.
为了实现轧辊的顺序凝固，设计了一套电磁半连续复合铸造试验装置。
In order to achieve progressive solidification for roll, the test equipment of electromagnetic hemicontinuous compound casting has been designed.
指出电磁泵低压铸造技术以其特有的优势，将在镁合金轮毂的生产中发挥重要作用。
It is indicated that, with it special merits, low pressure die casting based on the electromagnetic pump will play a important role to produce magnesium wheel.
电磁泵可以用来传输液态金属并可将其应用于铸造工艺。
Electromagnetic pump can be used for casting process to transfer molten metal.
研究了铝合金电磁低压铸造工艺参数关系及控制方法；
The processing parameters relationship and control method of electromagnetic low pressure casting for aluminum alloy have been investigated.
采用0.8%钒铁变质后的高铬铸铁，进行电磁离心铸造浇铸，研究高铬铸铁组织和力学性能变化。
The high-Cr cast iron which is modified by 0.8% V-Fe is obtained by centrifugal casting and high cr iron microstructure and performance are discussed.
软接触结晶器电磁连铸方法是一项新的连续铸造技术，主要用于钢的连续铸造过程，目前已取得了较快的进展。
Soft contact electromagnetic continuous casting is a new type method for continuous casting technique which main used in the cast of steel and have been developed greatly now.
软接触结晶器电磁连铸方法是一项新的连续铸造技术，主要用于钢、铝的连续铸造过程，目前已取得了较快的进展。
Soft contact electromagnetic continuous casting is a new type method for continuous casting technique which main used in the cast of steel, aluminum and have been developed greatly now.
在传统热顶铸造基础上，开发了一种新的热顶铸造结晶器，并在铸造过程中施加了低频电磁场。
A new hot-top casting mold was explored based on the conventional hot-top casting, and low frequency electromagnetic field was applied in the process of casting.
综述了利用外力场（离心铸造法和电磁分离法）制备自生梯度复合材料的研究现状。
The developing level of the technology of producing in-situ gradient composites in outside force field (centrifugal method and electromagnetic separation method)has been reported.
试制结果表明：所设计的传输管道的结构、支架挤压铸造模具设计和电磁充型间接挤压铸造成形工艺参数合理。
All these results indicate the feasibility of the designed electromagnetic transfer system, the designed die structure, and the parameters of the indirect squeeze casting process.
电磁悬浮熔炼离心铸造（ELCC）技术是大幅度降低太阳电池硅片成本的一条新途径。
The Electromagnetic levitation melt centrifugal casting(ELCC)technology for preparing the low cost high quality silicon solar cell paves a new way for reducing the production cost of the solar cell.
研究表明：复合悬浮剂线材能实现变形镁合金的电磁-悬浮铸造，而且能改善合金的微观组织。
It shows that the complex suspension particles can be used to electromagnetic-suspension casting experiment and refine the alloy's microstructure.
研究表明：复合悬浮剂线材能实现变形镁合金的电磁-悬浮铸造，而且能改善合金的微观组织。
It shows that the complex suspension particles can be used to electromagnetic-suspension casting experiment and refine the alloy's microstructure.
应用推荐