并且将弧形电极设计成多弧形结构可省去透明电极的制作，降低生产成本。
The arc electrode can be designed into multiple arc structure to save the production of transparent electrode for lowering the production cost.
这种四电极设计使得一个传感器能够同时测量两种气体并且输出两种不同的信号。
This 4-electrode design is able to produce two separate signals which allow two gases to be measured with one sensor.
不仅如此，采用柔性的电极设计还可以覆盖较大面积的脑部，这样便可以捕获更大脑部区域的脑波信息。
The flexible electrodes in the implant also means that the implant can be stretched out to cover larger sections of the brain allowing the capture of signals from a larger section of the brain.
讨论了FPS - MS型视象管的工作模式和三种不同结构全静电型视象管的图案电极设计及其工作性能。
The operating model of FPSMS vidicon is presented. and the pattern yoke designs for three types of all-electrostatic vidicons with different structures and their performances are discussed.
目前有几种不同类型的电极设计。一些设计是将电极置于锅炉内部，一些则是将电极安装在锅炉以外的安装区域。
There are several different types of electrode designs currently in use. Some designs are internal to the boiler while others are installed in external mounting POTS.
他们设计出的电极由多孔碳和锂氧化物制成。
They designed an electrode made from porous carbon and lithium oxide.
一种增大燃料电池内电极表面积的新设计也提高了这种设备的总功率。
The total power of the device should improve further with a new design that increases the surface area of the electrodes within the fuel cell.
最终，该设备将被设计成使用者不需知道脑电图或者如何设定电极。 使用说明会简单明了。
Ultimately, the device will be designed so that you don’t even need to know about EEGs or how to set up electrodes.
碳块中有两个彼此间隔的电极，任意高于设计标准的电压都可以跨过电线入地。
The carbon block consists of two electrodes spaced so that any voltage above the design level is arced from line to ground.
介绍一种新型三电极结构SO 2气体传感器的工作原理、结构设计及其关键制作技术。
The working principle, structure design and critical fabricating technology of a new type of SO2 gas sensor with three-electrode structure are introduced.
软启动电路设计保证了电极和喷嘴等易损件的长寿命耐用。
Soft start-up circuit designed to ensure that the electrodes and nozzle, etc, wearing parts of long life and durable.
在此基础上进行了电弧炉电极调节自适应控制系统的设计，推导出了递推的离散时间模型参考自适应律。
Based on this the design of arc furnace electrode regulator adaptive control system is made, the rule of discrete-time model reference adaptive control is proven.
电极的设计是制作碳纤维水泥石压敏传感器的重要环节之一。
Design of electrode was one important technology of manufacturing of carbon fiber reinforced cement sensor (CFRCS).
我们设计并实现了一个基于物理模型的32电极的高精度iceit数据采集硬件系统。
We design and set up a high accuracy ICEIT hardware system with 32 electrodes based on physical phantom.
优化设计电极图形可以获得高的光电转换效率和加工质量的一致性。
Optimum design for coranercial cSi solar cell electrode, we can get high photoelectric efficiency and consistent quality in products.
同时设计并制备出差分输出感应电极用以抵消共模干扰。
We also design and realize the differential inducting electrodes to counteract the common-mode noise.
报道了汞膜修饰掺锡三氧化二铟导电玻璃电极的制备及其薄层电化学池的设计，测试了电极和薄层池的光、电化学性能。
A tin doped indium trioxide conducting electrode coated with mercury film (Hg ITO) was obtained and an optically transparent thin layer electrochemical cell with Hg ITO as electrodes was designed.
在MATLAB6.5环境下，通过编写和调试m文件，对电弧炉电极调节系统PD控制器进行设计与仿真。
Afterwards, the PD-controller of electrode regulator system of electric arc furnace is designed and simulated on MATLAB6.5 by compiling and debugging M-files.
本文以实例介绍晶体硅太阳电池上丝网印刷电极的优化设计。
For example, this paper introduces advantageous design for commercial cSi solar cell electrode.
电容近炸引信探测电极的设计，对确定引信灵敏度至关重要。
The design of detecting electrodes in a capacitance fuze is a critically important factor that determines its sensitivity.
在定量分析了两者对齿轮精度的综合影响之后，运用反补偿法预先修正齿形凹模，并进行了齿模电极的设计。
Quantitatively analyzing the effect of two to the profile of tooth, the inversing compensation method is then put forward to modify the die cavity and the electrode is designed.
通过分别以催化剂层和纳米颗粒层分别作为底部电极和顶部电极，研究人员成功地设计了一个气体传感器并测试了其传感性能。
By employing the catalyst and nanoparticle layers as bottom and top electrodes respectively, the researchers successfully designed and tested a gas sensor.
在此基础上，设计了用于12个电极点的卡肤电极或者10个电极点的剑状电极四通道神经信号激励模块。
Based on the module, a four channel module for the FES of neurons is designed for 12 sites cuff electrode or 10 sites shaft electrode.
介绍了电极的快速设计过程与防止薄筋电极加工时发生变形的方法，最终达到缩短模具制造周期的目的。
The quick design process of electrode and the method of the avoiding deformation in reinforced electrode manufacture are introduced, the aim is to shorten the cycle of die manufacture.
将单链DNA作为探针点在电极表面， 测量晶振频率的改变量，并设计出后续处理电路。
With the ssDNA as probe on the electrode surface, we can detect the frequency change and show it on the computer display.
为研究表面型人工视网膜微电极阵列在人眼压力环境下的位移，特别设计了多种微电极阵列，进行了应力仿真。
To study the displacement of MEA under the stress of eye, different kinds of electrodes were designed and stress simulation was carried out in the design process.
设计出新型旋转圆盘电极体系回收金属镉，电流效率达到90%以上。
A rotating disc electrode system was designed to recover Cd and the current efficiency was over 90%.
设计出新型旋转圆盘电极体系回收金属镉，电流效率达到90%以上。
A rotating disc electrode system was designed to recover Cd and the current efficiency was over 90%.
应用推荐