由NO、NO2的磁化率特性分析这两种气体对分析仪的影响，说明测氧仪的应用环境。
According to the magnetic susceptibilities of NO and NO2, the influences of these two gases on the analyzer are analyzed, and the application environment for the oxygen detector is discussed.
为了适当地分析RationalCodeCoverage特性中的覆盖率统计数据，理解场景背后所用到的技术是非常重要的。
In order to properly analyze the coverage statistics in the Rational Code coverage feature, it is important to understand the technology used behind the scenes.
本文借助连续系统理论分析了一个放置于刚性物体振源和刚性基础之间的单个隔振器的力绝对传递率特性。
The transmissibility of the isolator placed between a rigid body and a rigid base is analyzed by the use of the continuous system theory in this paper.
当回流比、溢流率和絮体沉降特性处于变化中时，可用“状态点”的概念对活性污泥— 沉淀系统进行设计工作和系统分析。
The state point analysis can be used in the design and operation analysis of the activated sludge system as the RAS ratio, overflow rate and settling characteristics of flocci are varying.
然后利用布洛赫理论分析了CPRW中存在的倏逝波的带结构，利用传输矩阵的方法讨论了有限周期的CPRW的透过率特性。
We analyze the band structure of evanescent wave in the CPRW by Bloch theory, and discuss the transmission properties of the CPRW with a finite number of periods by transfer matrix method.
从灵敏度角度出发多方面(离散相介质所在位置、离散相介质所占区域大小、离散相介质的电导率等)分析了介质分布影响灵敏场分布这一“软场”特性。
Through the analysis of the soft-field characteristic, it is found that the sensitivity field distribution is affected by the location, the size and the conductivity of the disperse phase medium.
本文从加筋土补强机理出发，对其进行了试验研究与分析，得出了加筋土结构中加筋率与伸长应变两个主要因素对其强度特性的影响规律。
Research and analysis on these two factors are conducted herein started with the mechanism of reinforced earth strength and the law of influence on strength by these two factors are acquired.
采用静态力学法，分析了中等密度、孔隙率的泡沫钼静压全程加载-卸载特性曲线。
The characteristic curve of full loading unloading with mid density sintered porous Mo specimens has been analysed under lower hydrostatic pressure.
应用此模型，既能有效方便地研究分析界面特性对电子迁移率的影响，又为将来的电路模拟打下了基础。
The model can be used to study and analyze influences of interface characteristics on electron mobility and is also a basis of circuit simulations in the future.
本文分析了轴对称场的光学特性，在此基础上，给出了一种计算轴对称场中折射率分布的新的再现方。
On the basis of analysising the optical characteristic of axisymmetrical field, this paper shows a new way to calculate the distribution of refraction index axisymmetrical field.
分析了比表面积、平均孔径、孔隙率等孔隙特性参数对扩散的影响，获得了分形多孔介质中气体扩散系数与平均孔径的函数关系。
The effect of pore characteristics on gas diffusion was analyzed. The relationships between the specific area, average pore diameter and porosity with the diffusion coefficient were obtained.
本文采用矩阵光学的方法，分析了高斯光束经球端面抛物型梯度折射率棒透镜的传播与变换特性。
Based on the matrix optics, the propagation and transformation characteristics of Gaussian beam through a parabolic gradient-index rod with the spherical end surfaces are analyzed.
为此，对变电站所在地的土壤进行了电阻率调查，分析了导电混凝土的特性及其技术经济指标，最终确定了地网方案。
Therefor, the soil resistivity of the substation is investigated; the features and the techno economical indexes of conducting concrete are analyzed, thus setting the scheme of the ground net.
在分析传感器几何特性、材料发射率、温度分布和环境温度对有效发射率影响的基础上，给出了传感器结构的优化参数。
On the basis of factors analysis of structure, material emissivity, temperature distribution and surrounding temperature, the sensor's optimum parameters are obtained.
通过受力情况和结构特性的分析，推导出了沉积物空隙率的函数表达式，在此基础上，给出沉积物质量与体积的换算关系。
It has deduced the mathematical function of the sediment void ratio on the basis of stress and structure analysis, and then the mass and volume conversion of deep bed filtration sediment is given.
从分析石油焦原料着手，考察了其热解特性、孔隙率和石墨化程度。
The pyrogenic decomposition property, porosity and graphitization extent of petroleum coke were investigated by analyzing the petroleum coke raw material.
通过对极紫外多层膜反射特性的分析，得到了峰值反射率、带宽和中心波长分别随粗糙度、周期厚度以及比值变化的函数关系。
By analyzing reflective properties of multilayers, the peak reflectivity, bandwidth and centroid wavelength as a function of roughness, period thickness and thickness ratio were obtained.
首先对形状记忆功能高分子的特性进行了分析，提出了形状记忆性能的评价指标，即形状回复率、形状固定率、形状回复速度等。
The characters of shape memorizing polymer were analyzed and some evaluations standard on it were proposed, such as shape recovered rate, shape fixed rate and shape recovered speed, etc.
本文基于小波分析提出由高分辨率图像可得到各种较低分辨率图像的多分辨方法符合人的视觉系统特性。
The multiresolution image representation based on the wavelet analysis is introduced. By this way, the image resolution can be decreased in keeping with the human visual system characteristic.
然后对无锡地区近年来的负荷特性进行了分析，主要对不同年份负荷率、峰谷差、典型行业的日负荷曲线数据进行分析，从中找出无锡地区负荷及负荷特性的特点。
Then it analyses the load characteristics of Wuxi, mainly on load-rate of years and typical daily load data or curves so that we can find the main specialty of the local load.
根据误差的频谱特性，分析了航空矢量测量系统的分辨率，得出了一些对实测飞行有用的结论。
The resolution of airborne vector gravimetry is analyzed according to the error spectrum and some conclusions useful for the flight are drawn.
分析了系统的故障率特性，确定了系统中各部件最小维修、故障更换、机会更换、预防性更换的概率。
So the characteristics of the units failure rate are analyzed to obtain the probabilities of the minimal maintenance and probabilities of replacement due to failure, opportunistic and preventive.
基于实测的示功图，对生物添加剂加入油品后最大缸内压力和燃烧放热率等方面做了发动机燃烧特性分析。
Based on the indicator diagrams obtained, the maximum pressure in cylinder and heat release rate after adding additive were analyzed.
目的探讨高成瘤率兔VX 2肝癌模型的建立，利用超声技术对肿瘤进行检测并分析其生长特性。
Objective to explore a method of high successful rate to establish the rabbit VX2 liver tumor model, and monitor the tumor with ultrasound technique.
分析了热管的启动特性以及热流密度、蒸发段倾角和充液率对其传热特性的影响。
The effect on heat transfer performance caused by heat flux, gradient and liquid-filled ratio of evaporation end was deeply investigated.
分析了影响成型特性的因素，如煤种、粒度、水分、成型压力和成型率等。
Analyses are made for the influence factors of moulding characteristics such as coal type, size, distribution water content, moulding pressure and briquetting rate.
介绍高分辨率显示管屏空间特性分析系统。
An analysis system for screen space property of high resolution display tube is presented in the paper.
最后，本文又对一种低折射率芯光子晶体光纤基模束缚损耗特性进行了分析。
Lastly, the fundamental mode loss of a special kind of depressed-index core PCF is analyzed.
分析了单体、引发剂等因素对聚合物特性粘数和单体转化率的影响。
To analyze the influence of factors such as monomer and initiator to the polymer limiting viscosity number and the monomer conversion rate.
分析了单体、引发剂等因素对聚合物特性粘数和单体转化率的影响。
To analyze the influence of factors such as monomer and initiator to the polymer limiting viscosity number and the monomer conversion rate.
应用推荐