其中包括计算矩阵的特征值问题,误差问题等。
Including the calculation of matrix eigenvalue problem, error and so on.
通过分析TDOA定位误差模型,讨论了同一辆公交车上同一时刻的多部手机的定位误差分布特征。
Then, we analyze the error statistic model when using TDOA to locate, discuss the statistic character of error distribution when using multi-phones location.
轴系回转误差运动的特征是一项复合信号,它含有周期分量和随机分量。
The characteristics of error motion of shafting is a complex signal which includes periodic component and random term.
最后,给出了一种基于汉字图形轮廓特征的误差估计方法,并利用误差估计初步建立了一套带有反馈的汉字识别系统。
At last, a set of Chinese characters recognition system with reaction are constructed, based on and using the error estimation approach of Chinese characters Outlines feature.
在实验的基础上,对磨削过程振动特征以及由此产生的磨削表面形貌误差进行研究。
The vibration characteristics of external plunge grinding and the ground surface profile error are investigated through experiments analysis.
通过对机械加工表面轮廓特征的分析,说明了在表面轮廓参数测量中,消除各种误差影响的必要性。
Based on the analysis of the characteristic of machined surface profile, the necessity to eliminate errors' influence on the measurement of surface profile parameters was explained.
根据该差分方程的特征值表达式讨论了AGC模型设定序列的稳定区域和稳态误差与AGC模型参数之间的关系。
On the basis of the expression of characteristic value of the differential equation, the relationship between the stable domain, steady state, steady-state error and AGC model parameters is discussed.
轮廓的尺寸量、位置量以及形状误差估计值的不确定度与测量误差、被测轮廓的形状特征以及采样策略等有关。
Sampling strategy, measurement errors and measured contour form features are all related to the uncertainty analysis for dimension, position and form error estimated.
并对产品测试任务共性特征、系统集成原理、测试安全性、系统故障诊断功能、系统误差进行了分析。
And the general character, system integration principle, test security, system fail diagnosis and systematic error of the test task are analyzed.
由于馈电误差随机分布,提出了采用数字统计特征分析旁瓣电平恶化情况的方法。
As feed errors are distributed random, a method of adopting statistical characteristics to analyze the degradation of sidelobe levels is proposed.
本文提出了三维地理信息系统中几何特征的误差模型。
This paper presents the error models developed for handling geometric features in three dimensional Geographical Information Systems.
只要预处理、特征抽取及分类得当,时间间隔和实验误差等因素对运动想象识别的影响不大。
With the suitable pretreatment, features extraction and classifier design, the influence, which arose from time interval, experiment error and so on, can be nearly ignored.
基于齿轮副的动态啮合模型,对具有误差激励的齿轮副按长、短周期从理论上研究了其动态响应特征。
The paper researches the spectrum characteristics of dynamic response of the gear pair with the error excitation in the long and short period based on dynamic mating model of the gear pair.
利用灰色理论本身的特征对经济参数进行预测,并运用自适应模糊神经网络对其拟合误差进行预测,从而达到较好的预测效果。
This article utilizes the character of Gray Theory to predict the economy parameter, and then in order to obtain a better predicting effect, the ANFIS is employed to predict its simulating error.
通过分析网络误差曲面特征,提出了快速BP算法,它可以大幅度地提高学习速度。
Based on analysing characteristics of error curved surface of the network, the authors have advanced the rapid BP algorithm, which can greatly raise the learning speed.
提出的过零点检测算法,较好解决了脉搏信号时域特征点参数多,分析复杂,误差较大的问题。
The algorithm of measuring zero-crossings can better solve the problems that the characteristic parameters of the pulse signal are complicated in the time field and the measuration errors are greater.
针对柔性加工过程的特征,研究了基于遗传神经网络的加工误差在线建模预报的方案和关键技术。
According to the feature of flexible machining, it be studied that the scheme and key technology of on-line modeling and prediction of machining error based on genetic neural network.
基本思想是利用已知的最大定位误差,确定两点对的最小匹配度量,从而减小虚假特征点对匹配结果的影响。
The known error bound of location deviation is used to determine the minimum matching merit for two point pairs so that the effect of spurious feature points can be reduced.
由于薄板冲压件的易变形性和制造误差特征,薄板焊装夹具设计显著区别于普通机械加工工件定位夹具。
Due to forming error and compliance of stamping, the fixture design of sheet stamping assembly is different from the fixture design of common machining component.
分析了用夫朗荷费衍射测量微小尺寸的原理误差,包括夫朗荷费近似误差和极值特征点位置探测误差。
Analyzes the principle errors in measuring small dimensions by Fraunhofer diffraction, including Fraunhofer approximation error and the place detecting error of extreme value characteristic aspect.
采用信号四阶和六阶统计量提取信号特征,使用新设计的误差函数训练RBF神经网络,使得识别的效率和正确度得到了明显的改善。
The forth-order and sixth-order cumulants of received signal are adopted for features extraction while RBF neural networks with a new designed training cost function being used for classifier.
通过验证,所产生的调制信号具有良好的误差向量幅度(EVM)和频谱特征。
The algorithm is verified by experiments and the modulator can produce digital modulation signals with good EVM(Error Vector Magnitude) and spectrum mask.
在研究整体最小二乘法的基础上,分析摄像机成像误差的统计特征,明确误差对基础矩阵估计算法的影响。
This paper analyzes the statistical characteristics of camera imaging error based on studying total least squares, and clarifies the error effect on estimating fundamental matrix.
这舍入误差的特征是浮点计算。
This rounding error is the characteristic feature of floating-point computation.
线性模型的基本特征是,模型的未知参数是线性的,同时又线性的包含了随机误差项。
The basic characteristic of the linear model is the unknown parameter of the model is linear and it also includes the linear random error.
分析了GPS卫星星历误差的影响特征与规律,提出了广播星历误差影响诊断与预测模型。
This paper analyzed the characters and rule of the satellite ephemeris error. It proposes the Model of the diagnosis and Forecast for the GPS broadcasting ephemeris error.
通过分析某精密转轴轴心径向回转误差运动轨迹的方差变化规律,证明该轴的回转运动具备了分数布朗运动的基本特征。
According to variance changing laws of a precise rotor radial rotating error motion, it can be proved that the rotor's motion track is characterized by fractional Brownian motion.
并根据加工过程中的进给步距和不同波长面形误差的特征分析了研抛盘直径的合理取值范围。
Based on feeding pace and error component of various wavelength, reasonable diameter of abrasive disk is analyzed.
根据暂态时滤波误差发生突变的特征,提出误差比阈值法判断暂态过程的起止时间。
Considering the characteristic of filtering error which occur mutation when there is a transient signal, the met.
通过对背景误差方差、特征长度的调整,显著改善了背景误差功率谱的分布特点,使得NMC方法结果与更新矢量方法结果更为吻合。
After the tuning of background error variance and de-correlation length, results from the NMC-method are closer to those of the innovation vector method, and the analysis results are improved.
应用推荐