通过力学和物理性能分析和测试，采用以上方法研制这种坐衬零件满足使用要求。
By analyzing and testing its mechanics and physics ability, it is proved the new method is successful.
利用石英砂制备高性能石英砂烧结砖，通过对原料和砖体物相分析、砖体的显微结构分析以及砖体的物理性能分析，研究温度制度对砖体性能的影响。
The paper studies the influence of temperature system on the microstructure and behaviors of high-performance quartz sand sintering brick by XRD and SEM analyses.
利用石英砂制备高性能石英砂烧结砖，通过对原料和砖体物相分析、砖体的显微结构分析以及砖体的物理性能分析，研究温度制度对砖体性能的影响。
The paper studies the influence of temperature system on the microstructue and behaviors of high-performance quartz sand sintering brick by XRD and SEM analyses.
因为某些元素(尤其是碳)的微小百分比极大地影响物理性能，所以必须知道对钢的分析。
The analysis of the steel must be known because small percentages of certain elements, notably carbon, greatly affect the physical properties.
从硅材料的物理性能出发，分析其微细电火花加工的可行性。
This paper analyses the micro EDM feasibility for semiconductor silicon from the physical properties of silicon.
分析了苎麻纤维的化学及机械物理性能，阐述了浆料配方的依据，提出了苎麻纱的上浆要求及上浆工艺路线。
This paper analyses chemical, mechanical and physical properties of ramie yarn fiber, expounds the basis of selecting sizing agent and points out the requirements and routes of the sizing process.
通过试验分析了美棉的物理性能，美棉纤维成熟度好，纺纱过程中杂质易排除，因而成纱疵点明显减少；
Physical property of American cotton was analyzed through test, American cotton fiber has good maturity, and the impurities were easy to excluded, so the yarn defects were obvious reduced.
纤维体积分数是物理性能研究的最主要参数，力学分析以复合材料的弹性性能为主。
The fibre volume fraction is the primary physical performance parameter, while the mechanical research focuses on the composite elastic properties.
分析了各种对丙纶纺粘非织造布物理性能的影响因素。
This article mainly analyzes the influence of all kinds of factors on the physical properties and performances of PP spunbonded non-woven fabric.
本文用凝胶—沥青复合粘结剂研制成一种新型少烟害炭素电极，并对其主要物理性能作了测试分析。
A new type of carbon electrode using colloid-pitch as complex binder was made. It's main physical properties were measured and analyzed.
介绍了彩色三维打印（3DP）成形技术的工作原理及其成形工艺，分析了彩色三维打印的原型件的物理性能。
The operation principle and working process of color Three Dimensional Printing(3DP) technology are introduced, and physics performances of the color 3D Printing prototype are analyzed.
液体硅橡胶（LSR）具有独特的物理性能，通过液体硅橡胶注射模设计实例，分析了其注射模设计中应注意的几个问题。
The liquid silica rubber(LSR) had unique physical performance, through the liquid silica rubber injection mold design example, analyzed several attention points in designing injection mold.
为了对天然彩色棉进行抗紫外线处理，首先分析了彩色棉自身的一些特点，包括它的物理性能和化学性能。
In order to precede resisting-ultraviolet treatment, at first analyzing some characteristics of colored cotton, including its physics performance and chemical property.
采用力学、物理性能测试，金相、扫描电镜、能谱和X衍射分析研究了气门座圈产品失效的主要原因。
The failure of the powder metallurgy valve seat was analyzed by optical microscopy, scanning electronic microscopy, X-ray energy spectrum and X-ray diffraction.
通过金相、扫描电镜分析和物理性能测试等手段，对由镀铜石墨粉制备成的复合材料的组织、性能进行研究。
By means of the analyses of SEM and metallograph and physical tests, the microstructure, properties of composites made from copper-coated-graphite powder were studied.
文章分析了具体原因，并采用简化的有限元计算证明了不同材料的热物理性能对这一激光加工过程的影响。
The paper analysed the reason and proved the effect of different thermal physical properties of different kinds of metal powder on manufacturing process by FEM-Calculation simplified.
本文作者对部分国内外锌锰干电池用浆层纸的物理性能及缓蚀性进行了一些测试，并对测试结果进行了分析。
Physical performance and corrosion inhibitive rate of some coated paper made both at home and abroad were tested. The testing results of all these coated papers were analyzed.
分析了温度、水分等工艺条件对大豆组织化蛋白物理性能的影响。
Effects of temperature, moisture and other factors on physical characteristics of soy texturized protein were studied.
有关三维编织复合材料的理论分析研究归纳为：基于细观结构几何模型的物理性能研究和力学性能研究两部分。
The research on 3D braided composites can be classified with the research of physical performances based on mesoscopic geometrical model and mechanical properties.
在金相显微镜下对材料的增强结构进行了分析，并对材料热物理性能进行了测定。
The composite reinforced structure was analyzed with a metallograph, and thermal physical properties of material were measured.
通过不同林龄木材物理性能和纤维形态、化学分析及纸浆造纸性能确定工艺成熟龄。
The technical maturity of the plantation was determined according to physical property of wood, fibre form, chemical components, and pulp characters.
讨论了石墨的物理性能，分析了片状和球状石墨聚集状态对铸铁气割性的影响。
The influence of flake and spheroidal graphite on oxyacetylene cutting characteristic of cast iron has been analysed.
以电磁学理论为基础，测试、分析了超薄导电片的电磁参数并对其基本物理性能进行了研究。
Based on the electromagnetic theory, the electromagnetic parameters and basic physical capability of ultrathin electric slice are measured and analyzed.
探讨棕叶纤维脱胶方法和工艺以及其物理性能，分析了化学成分。
The de-gumming method and process of palm leaf and it's physical properties are probed. It's chemical composition analyzed.
通过对长江淤泥进行化学分析、矿物分析及物理性能测定，对长江淤泥的性能及分布进行全面的评价。
Through chemical test, mineral test and physical performance measurement for Changjiang slit, the paper takes a full evaluation on its property and distribution.
分析了进口原棉的特性，对其物理性能指标进行了测试，并进行了单唛试纺。
The property of import raw cotton is analyzed, and the p hy sical performance index is tested. Single test spinning is also done.
通过实验分析了硅光电子开关的物理性能。
The physics characteristic of silicon optoelectronic switch is discussed through the experiment.
本文介绍了该产品的生产工艺和物理性能，分析了中国的生产状况和消费环境，认为中国有一个正在兴起的干法造纸产品市场。
The paper introduced the production technique and physical performance of the products, analyzed production condition and consumption surrounding in China. Airlaid nonwovens market is born in China.
分析了纯棉用胶圈、化纤用胶圈胶料的物理性能及在不同品种上的纺纱试验结果，指出了现有胶圈适纺性差的原因。
Physical property and spinning test result of apron used in cotton and chemical filament fiber are analyzed, and the cause of bad spinnability is pointed out.
用透射电子显微镜、扫描探针显微镜、紫外-可见分光光度计和热重分析仪表征了复合材料的物理性能，分析了其吸收蓝移及热稳定性提高的机理。
The physical properties are characterized by TEM, SPM, UV-Vis and TGA. The mechanism of absorption blue-shift effect and the improving of thermal stability of nanocomposite materials are analyzed.
应用推荐