这些燃料管然后通过简单的接触换热把热量传给主回路中的冷却剂。
These tubes then transfer heat to the primary circuit water, simply by contact.
而且增加多个接线和燃料管的托架位置以供较简洁的外形及更实用的无线安装。
Several mounting points for wiring and fuel tubing are also added for cleaner appearance and more practical radio installations.
如果核燃料管无法降温，就会发生熔毁，到时反应器的内核也会熔化，从而引起核泄漏。
A meltdown occurs when nuclear fuel rods cannot be cooled, thus melting the reactor core and causing a release of radioactivity.
进入管前端的空气与燃料进行混合，像热煤气一样点燃。
Air which entered the front was mixed with fuel and burnt as a hot gas.
如果内核溶解并且压力管爆炸(甚至溶解)的话，它会接住溶解的燃料以及其他任何东西。
If the core melts and the pressure vessel bursts (and eventually melts), it will catch the molten fuel and everything else.
随着纳米管里的热量反馈到燃料涂层上，一种沿着纳米管移动的热波就产生了。
As the heat feeds back to the fuel coating, a thermal wave is created that is guided along the nanotube.
但是研究者争辩说，如果把二氧化碳和水蒸气从纳米管薄膜端通入，在另一端收集甲烷燃料，整个处理过程可以变为连续性的。
But the researchers argue that their process could be made continuous if carbon dioxide and water vapour could be passed through the nanotube film and the methane fuel collected from the other side.
有研究者已利用一种纳米管催化剂，在光的作用下，把二氧化碳和水蒸汽转化为一系列的燃料，转化的速度比以往加快。
Researchers have used sunlight to convert carbon dioxide and water vapour into a range of fuels faster than ever before, thanks to a nanotube catalyst.
这种长管被称为燃料棒。
在最新的实验中，这些既导电又导热的纳米管中的每一根都涂上了一层反应燃料（reactivefuel），这种反应燃料能够通过分解产生热量。
In the new experiments, each of these electrically and thermally conductive nanotubes was coated with a layer of a reactive fuel that can produce heat by decomposing.
燃料由不同支路通过分配管，分别进入燃烧器的各通道。
Fuel coming from different branches past the distributing pipe and enters into each passage of the burner.
M 5合金是一种适用于高燃耗组件的新型锆合金，主要用作燃料棒包壳、端塞、导向管和定位格架材料。
M5 alloy was a new zirconium alloy used in high burn up assembly such as fuel cladding, end plug, guide tube and grid spring and so on.
飞船也不能长时间在天空盘旋，游戏画面右上方有燃料显示管，燃料烧完飞船将迫降了。
Not long spaceship in the sky circled the upper right corner of the game screen display of fuel fuel burning will be forced landing of a spacecraft.
阐明了核燃料元件制造的重要设备之一——自动切管机设计、研制的必要性和意义。
The significance and necessity to design and develop an automatic tube cutting machine are introduced which is the key equipment in the manufacture of nuclear fuel elements.
催化剂和碳纳米管是燃料电池最关键的材料之一。
Catalyst and carbon nanotubes as one of the key materials for fuel cells.
一个通道在第二喷嘴管的近端和远端之间延伸，并且该通道与燃料源和所述孔流体连接。
A passageway extends between the proximal end and the distal end of the second nozzle tube, with the passageway fluidly connecting to the fuel source and the aperture.
利用矩形激波管测定了几种碳氢燃料与空气混合物的爆轰极限和临界起爆能。
This paper measured the critical energy and detonation limit of hydrocarbon and air mixtures in the rectangle shock tube.
加热器的工作是预防装置进料管中的联氨燃料冻结。
The heater's job is to prevent hydrazine fuel in a feed pipe to a unit from freezing.
通过这些措施的实施，可以提高管坯的加热质量和减少燃料的消耗。
Through the measures above, better heating quality and less gas consumption were obtained.
本文介绍了纳米催化剂和碳纳米管的制备方法，分析了纳米催化剂和碳纳米管在燃料电池中的应用状况。
Introduced the methods of nano-catalyzer's and carbon nanotubes's preparations, Analyzed the applied status of nano-catalyzer and nanotubes in the fuel cell.
在激波风洞一激波管组合设备上开展了碳氢燃料超声速预混可燃气流的点火与燃烧实验研究。
Experimental investigation on ignition and combustion of supersonic premixed hydrocarbon fuel-air mixture has been conducted in the combination facility consisting of a shock tunnel and a shock tube.
本装置是通过一个橡胶管将燃料从钢或者铝制的入口配件运输至同样材料制作的出口配件。
A rubber fuel line, without any metal reinforcements, is used to convey the fuel from an inlet fitting made of steel or aluminum to an outlet fitting, again, made of steel or aluminum.
利用碳纳米管，他和他的同事在燃料电池的电子上找到了2种不同的酶，在燃料电池中他们通过释放葡萄糖的电子来产生电能。
Using carbon nanotubes, he and his colleagues immobilised two different enzymes on the electrodes of a fuel cell, where they generated electricity by freeing electrons from glucose.
综述了包括催化剂、电极、质子交换膜、电解质、双极板和碳纳米管在内的质子交换膜燃料电池的研究进展。
Research progress in PEMFC including catalyze, electrode, proton exchange membrane, electrolyte, bipolar board and carbon nano-tube were described.
为了提高彩管玻壳的生产质量，要求对做为玻璃炉窑燃料的天然气的热值进行精确控制。
The heating value of the natural gas used as the fuel for the glass melting must be accurately controlled to improve the production quality of color TV tubes.
至少一个第二喷嘴管与燃料源流体连接并从第一喷嘴管向外径向分隔开，并且该第二喷嘴管的近端固定于法兰。
At least one second nozzle tube is fluidly connected to the fuel source and spaced radially outward from the first nozzle tube with a proximal end fixed to the flange.
此外，由燃烧驱动激波管产生的高温燃气作为引导火焰点燃激波风洞产生的预混与预热的超声速碳氢燃料——空气混合物。
In addition, a hot, burned gas generated from the shock tube was used as pilot flame for igniting the premixed and preheated supersonic hydrocarbon-air mixture generated in the shock tunnel.
此外，由燃烧驱动激波管产生的高温燃气作为引导火焰点燃激波风洞产生的预混与预热的超声速碳氢燃料——空气混合物。
In addition, a hot, burned gas generated from the shock tube was used as pilot flame for igniting the premixed and preheated supersonic hydrocarbon-air mixture generated in the shock tunnel.
应用推荐