所有的体系在熔融状态都表现出好的稳定性和正常的流动。
All systems exhibit good stability and normal flow in the molten state.
火成岩是从熔融状态(特别是通过熔化岩浆)凝固而成的石头。
Igneous rock is rock formed by solidification from a molten state; especially from molten magma.
研究表明：苯甲酸锰与苯甲酸铜在苯甲酸熔融状态下表现出相似的分解性质。
The pyrolytic property of manganese benzoate is similar to that of cupric benzoate.
在熔融状态下无铅焊料合金的行为是影响电子产品微连接钎焊性的关键因素。
The solderability of electronic solders and some factors that influence the solderability are discussed.
结果表明，利用熔融状态的高炉渣配加适量玄武岩矿石制造玄武岩棉是可行的。
The results indicated that the BF slag can be used as raw material to make basalt wool, and the sensible heat in the molten state slag is recycled and utilized.
结果表明，该聚酰胺在熔融状态下具有明显的液晶态结构，属于典型的主链型热致液晶。
The results demonstrate that this novel polyamide has an obvious liquid crystalline behavior when being heated into molten state, and is a typical kind of thermotropic liquid crystal.
利用反应性挤出技术，在熔融状态下BPO能有效地引发HBS木质素与苯乙烯的接枝共聚。
HBS lignin can be effectively copolymerized with styrene initiated with BPO in molten state by reactive extrusion technology.
该方法采用中间体悬浮液浸渍玻璃纤维，烘干，熔融状态下拉挤成棒型，切粒，注射成型。
The LGF was dipped into suspending intermediate, dryed, molten to draw- extruded to be bar, pelleted and molded.
这种密封实际上并不接触轴的表面，它的密封原理是将聚合物冷却到半熔融状态而形成自密封。
This fact does not contact the shaft seal surface, it is the sealing principle of polymer cooled to half molten state and forming the seal.
同样，在压缩段和均化段，如果塑料的熔融状态紊乱不均，也会造成磨损增快。2、转速应调校得当。
Similarly, in compression and homogenization, if uneven plastic molten state of disorder, can cause wear faster. 2, rotational speed should be proper calibration.
测试了熔融状态下三种不同组分的电解质对碳阳极和自制的镍铁尖晶石基金属陶瓷惰性阳极的润湿性。
The wettability of three kinds of molten electrolyte on carbon anode and NiFe2O4-based cermet inert anode were investigated.
分流板与喷嘴和注塑机连接，将注塑出来的熔融状态的塑胶熔体通过加热的分流板压力均匀分流到各个喷嘴。
Flow distribution plate and the nozzle and the injection molding machines are connected, the injection of molten plastic melt by heating the shunting plate pressure evenly distributed to each nozzle.
月球被认为是由约45亿年前一个火星大小的星体与当时仍然处于熔融状态的地球相撞后弹出的碎片所形成的。
The moon is thought to have formed from debris ejected into space after a Mars-sized body collided with the still-molten Earth about 4.5 billion years ago.
熔融状态下的炉渣含有大量能量，介绍了国外几种从炉渣中回收热量的方法，对回收的能量如何利用进行了分析。
There is much energy in furnace slag in molten state. Several foreign recovery methods of heat from the slag are presented and utilization methods of the energy recovered are analyzed.
近年来，多种聚合物已成功被静电纺丝成极为细小的纤维，其中大部分是溶解在溶液中，也包括少部分为熔融状态。
Various polymers have been successfully electrospun into ultrafine fibers in recent years mostly in solvent solution and some in melt form.
熔炼基本上是一个熔化过程，在此过程中炉料的组元在熔融状态下分解为两层或多层，这些层次可以是熔渣、冰铜、黄渣或金属。
Smelting is essentially a melting process in which the components of the charge in the molten state separate into two or more layers which may be slag, matte, speiss or metal.
使用化学方法制备pbo2可通过在溶液相或熔融状态下氧化二价铅的化合物，也可以通过在氧气中高温加热二价铅的化合物来制备。
Lead dioxide has been prepared chemically by methods in which Pb (II) compounds are oxidized to lead dioxide in the solution phase or in melts or by heating at elevated temperatures in oxygen.
金属热处理过程其实是一系列具体的操作，通过这些操作加热与冷却金属，但加热时进行控制，使得金属不达到熔融的状态。
The process of heat treating is the method by which metals are heated and cooled in a series of specific operations that never allow the metal to reach the molten state.
研究基于热传输理论的熔融金属从液体转变到固体状态变化过程是铸件凝固研究的重要分支。
Research on that metallic melts transforms from liquid to solid state based on heat transfer theory is an important discipline in casting solidification.
离子液体是由有机阳离子和无机或有机离子构成的、在室温或者室温附近呈液体状态的熔融盐，它完全由离子组成。
Ionic liquids consists of organic cation and inorganic or organic ions, and it is the melting state of liquid salt in the room temperature or near, also entirely composed by ion.
在定长状态下纤维的熔融吸热峰会发生很大变化，若在适当温度下进行热处理，可加速结晶形态的转化过程。
The melting peaks changed largely under fixed length state. Annialing fibers at a suitable temperature can accelerate the transition between the crystal morphologies.
采用自制单孔熔融纺丝系统，对熔融纺丝状态时聚碳硅烷（PCS）的流变特性展开了研究。
The rheological property of polycarbosilane(PCS) spinning melt is studied with self-made single-orifice melt spinning system.
随着拉伸倍数提高，纤维经松弛状态下热处理后，其熔融峰数目由1个变为2个；而经部分张力和张力状态下热处理后，其熔融峰数目均由1个变为3个。
The number of melting peaks was increased from 1 to 2 with the increase of draw ratio after heat treatment under relaxation and from 1 to 3 after heat treatment under partial tension or full tension.
结晶型树脂有很尖锐的熔点，要求大量的热能才能进行相转变并熔融到一种低粘状态。
Crystalline resins have a very sharp melting point and require significant energy (heat) input before they undergo a phase change and melt to a low viscosity.
结晶型树脂有很尖锐的熔点，要求大量的热能才能进行相转变并熔融到一种低粘状态。
Crystalline resins have a very sharp melting point and require significant energy (heat) input before they undergo a phase change and melt to a low viscosity.
应用推荐