可以认为颗粒与基体间弱界面的解聚是熔融石英颗粒复合材料韧化的原因。
The decohesion of the weak interface between particle and matrix may be considered as the origin of toughening.
木塑复合材料的加工技术是把塑料、木质纤维(稻壳、木屑等)与助剂一起熔融、混炼制成颗粒，再经过挤出成型的一种加工方法。
Processing technology of WPC is a kind of processing method that plastics and wood fiber are melted, smelted and extruded together with chemistry assistant agents.
结果表明：该复合材料有优良的拉伸强度、抗水性和熔融流动性；
The modification results in the excellent mechanical properties, water resistance and melting fluidity of this composite material.
通过熔融混合挤出得到增强HIPS复合材料。
Mixed melt extrusion through enhanced HIPS composite materials.
由于TLCP和PET在热力学上不相容，单纯用熔融共混法，以TLCP来对PET进行原位复合增强效果不明显。
Because PET and TLCP are not miscible in thermodynamics, the effect that only using TLCP to "In-situ" reinforce PET by melt blending is not clear.
挤出共混法通过熔融混炼聚合物和纳米微粒可加工成稳定的纳米复合材料。
Extrusion blending method can process a stable nanometer compounding material through melt-mixing polymer and nanometer particle.
采用一种新的熔融浸渍工艺制备了长玻纤增强尼龙6复合材料，研究了玻纤含量、玻纤长度分布对复合材料力学性能的影响。
The long glass fiber reinforced PA6 was prepared by using a new melt impregnation process. Influences of the glass fiber content and distribution to the composite were studied.
本文分别采用熔融法和热压烧结工艺制备了致密的二硅酸锂微晶玻璃及其复合材料。
The lithium disilicate glass-ceramics and their composites with high relative density were prepared by melting method and hot-pressing technology, respectively.
用XRD、IR、DSC和SEM等分析方法研究了聚合物粉末直接熔融嵌入合成聚氧乙烯（PEO）-蒙脱石夹层复合材料的过程。
The synthesis of poly(ethylene oxide)(PEO) montmorillonite composite by direct melt intercalation of polymer powders in layered silicates is studied by using XRD, IR, DSC and SEM, etc.
采用熔融插层法制备SBS 4402/有机蒙脱土（OMMT）纳米复合材料。
The melting intercalation method is used to produce SBS 4402/organic montmorillonite (OMMT) nano composite material.
为采用高速熔融纺丝法应用纳米抗菌PET复合材料提供了实验数据与理论依据。
The results provide a basis for the application of high speed melt spinning to nano-antibacterial PET composites.
首先通过熔融插层法制备了HDPE/MMT复合阻燃材料和煤改性HDPE/MMT 复合阻燃材料。
Firstly HDPE/MMT flame retardant composites and coal modified HDPE/MMT flame retardant composites are prepared through melt intercalation method.
采用二次多项式逐步回归法得到淀粉复合膜感官评价、穿刺强度和熔融体黏度等指标的回归方程。
Therefore, the sensory performance and puncture intensity of starch complex film could be predicted by melt viscosity of film liquid.
成功地制备了以泡沫金属镍为基体和熔融盐复合形成新型高性能复合蓄热材料。
We successfully prepared the high quality composite heat storage materials by combining foam metal nickel base and some kinds of molten salts at certain temperature.
通过碱金属离子与聚氧化乙烯（PEO）的络合配位制备了不同比例的PEO聚电解质，将PEO聚电解质与尼龙6熔融共混挤出，制备抗静电尼龙6复合材料；
Nylon 6/Polyethylene oxide (PEO) polyelectrolyte composites with different molar ratio of alkali metal ion and PEO polymer unit were prepared by means of complexation reaction.
利用差示扫描量热仪（DSC）研究了炭纤维（CF）表面异氰酸酯化改性后阴离子接枝尼龙6（PA6）对CF/PA6复合材料中PA6的多重熔融行为的影响。
The effect of surface isocyanation of carbon fiber on the melting behavior of PA6 in CF/PA6 composites was studied by Differential Scanning Calorimetry(DSC).
选用熔融纺丝法制备PDLLA／HA复合纤维，探索了熔融纺丝过程中温度、挤出机转速、拉伸速率、加料速度和冷却速率等一系列工艺参数的选择及其影响因素。
PDLLA/HA composite fibers were produced by melt spinning, and the choices of the process parameters such as temperature, revolving speed and drawing speed etc were discussed.
熔融造粒法具有简化工艺流程、降低能耗和生产成本的特点，生产的硝基复合肥产品合格率高。
Nitro-compound fertilizer produced by melt prilling method, which had the characteristics of simple process, low energy consumption and low production cost, had high quality.
对复合体系的形态结构、熔融及非等温结晶行为进行了研究。
The morphological structures and melting properties as well as non-isothermal crystallization behavior of blend were investigated.
采用液态金属渗透法把碳纤维与熔融锌和锌合金制成复合材料。
The composite has been prepared by the infiltration of carbon fibres with melting zinc and the zinc alloy.
该抗菌抗紫外线复合功能健康纤维，使用复合功能健康纤维母粒，通过熔融高速挤压纺丝制得。
The antibacterial anti-ultraviolet compound function health fiber USES compound function health fiber master batches and is made through melting and extruding spinning in a high speed.
蒙脱土特殊的层状结构使得利用熔融共混在机械力的作用下插层到纳米级复合材料成为可能。
The lamellar structure of montmorillonite makes it possible to intercalate PA 6 into the nanocomposites under the action of mechanical force during the melt blending process.
用熔融共混法制备出聚丙烯基纳米复合材料，研究了形状和大小不同的纳米介孔MCM - 41填充物对聚丙烯基纳米复合材料的拉伸性能与热性能的影响。
The influences of the different shape and the different size of nano-sized mesoporous MCM-41 on the tensile properties and thermo-stability were investigated.
以L-乳酸和淀粉为原料，采用微波熔融共混法，制备出PLLA/淀粉复合材料。
PLLA/starch composites were prepared by microwave melt-blending method from L-lactic acid (LLA) and starch.
采用气流磨粉碎的方法制备了平均粒径在微米尺寸的三角蚌贝壳粉，将此贝壳粉与环氧树脂进行熔融共混得到一系列不同配比的复合材料。
Shell particles in micrometer level have been prepared by a jet milling, and it was used as filler to modify the properties of epoxy resin (EP) by melting-blending.
本研究采用粉末烧结工艺将陶土分别同性能优良的高温熔融盐复合，成功地制备出蓄热密度高、耐腐蚀性好且成本低廉的相变蓄热复合材料。
We have succeeded in making a kind of phase change material (PCM) of high thermal storage density, good corrosion-resistant performance and low cost of preparation by powder sintering method.
本文的主要研究内容包括：首先，以复合熔融盐为反应媒介合成了长达毫米数量级的单斜钨酸铅纳米带。
The main contents can be summarized as follows: Firstly, the raspite PbWO4 nanobelts with length up to a few millimeters were obtained by a facile composite-salt-mediated synthesis method.
本文的主要研究内容包括：首先，以复合熔融盐为反应媒介合成了长达毫米数量级的单斜钨酸铅纳米带。
The main contents can be summarized as follows: Firstly, the raspite PbWO4 nanobelts with length up to a few millimeters were obtained by a facile composite-salt-mediated synthesis method.
应用推荐