热烧结矿饼由烧结矿运输带和给料桌输送到。
The hot sinter cake is fed into the crusher by the sinter belt via a feeding table.
本实用新型涉及一种锯片，具体的说是一种冷压热烧结消音锯片。
The utility model relates to a saw blade, in particular to a sound-dampened saw blade formed by cold pressing and hot sintering.
针对东烧以利用自产浮选精矿为主，进行生产酸性小球团热烧结矿的改造，进行了小球团烧结工艺的制粒研究。
Point at the Dong Anshan sinter plant will modifying sintering production to acid MPS hot sinter with self- mined flotation concentrates, the granulating research of MPS process was conducted.
首先分析了热烧结矿筛分机(简称热矿筛)筛板使用寿命短的主要原因是由于筛板材质高温硬度低、高温耐磨性差。
It is analyzed the main reason that hot mineral screen plate has short service life, it is because that screen plate had low high temperature hardness and low high temperature wear-resistance.
研究了合金在真空烧结和热等静压烧结条件下的显微组织和力学性能。
The microstructure and mechanical properties of the alloy under the conditions of vacuum sintering and hot isostatic pressing sintering were investigated.
建立了硬质合金烧结-热等静压炉内传热的三维非稳态数值仿真模型，对炉内的温度场进行仿真与优化。
A three dimensional unsteady numerical model of cemented carbide sinter-HIP furnace was established. The temperature field was simulated and optimized with this model.
并探讨了水热反应烧结机理。
建立选择性激光烧结粉末的快速成型工艺过程的数值计算模型，并用于估算热固结宽度和深度。
Numerical simulation model for the thermal process of selective laser sintering of powders was presented to predict the sintered width and depth in selective laser sintering.
用热等静压法烧结制备了高导电性ZAO（铝掺杂氧化锌）陶瓷靶材，并用直流磁控溅射法制备出ZAO透明导电薄膜。
Aluminum-doped zinc oxide (ZAO) ceramic targets for sputtering were fabricated by hot isostatic pressing (HIP) and ZAO transparent conducting thin films were prepared by dc magnetron sputtering.
结果表明，烧结-热等静压制作的硬质合金孔洞消除了，并且硬质合金的抗弯强度和弯曲疲劳寿命也大幅度提高。
The results showed that cemented carbide manufactured by sinter-HIP is free of porosity and transverse-rupture strength, bending fatigue life are also greatly increased.
烧结终点是烧结过程中最重要的热状态参数，是判断烧结过程正常与否的标志之一。
Burn-through Point (BTP) is the most important heat state parameter in sintering process, and a sign to determine whether the process is normal or not.
本文对空气和水流过烧结青铜颗粒水平多孔槽道表面上的对流换热进行了实验研究。
Forced convection heat transfer of water and air in plate channels filled with sintered spherical particles was investigated experimentally.
并对烧结硬化材料、软磁复合材料、磁致热材料等粉末冶金新材料进行了评述。
New PM materials such as sinter hardening materials, soft magnetic composites and magneto calorific materials etc. are reviewed.
采用差式扫描热分析和高温动态X射线衍射对喷雾造粒白炭黑微球的烧结行为进行了研究。
The sintering behavior of white carbon powders by spray pelletization is investigated by DSC and high temperature dynamic XRD.
分析了烧结取消热矿筛工艺的生产影响，并提出了相关工艺调整措施。
The paper discusses the influence of remove hot screen in sintering process, and gives the method to adjust corresponding process.
提出了烧结机烟气中低温废热与甲醇蒸汽重整制氢整合的新方法，模拟建立了中低温废热结合甲醇重整制氢的系统。
A new approach was presented for combining the medium-and-low temperature waste heat in sintered gas with methanol steam reforming to produce hydrogen.
推板窑作为热工烧结设备，广泛应用于电子材料高温处理。
The pusher kiln is widely used to heat the electronic material with high temperature as a sintering device.
烧结机尾部的单辊热破碎机齿冠使用寿命过短，是钢铁行业的一大技术难题。
The shorter service life of single roller crushers installed on the end of sinter machine is a difficult technology problem to the steel-iron industry.
采用化学共沉淀法合成羟基磷灰石粉料，采用注浆成型、热压烧结及热等级压后烧结等工艺制备羟基磷灰石颌面骨材料。
Hydroxyapatite ceramic powder was synthesized by chemical coprecipitation process. The. maxillofacial bone materials were made by slip-casting. HP and HIP post-sintering method.
烧结制度是经过差热-热重分析（TG-DTA）来确定的。
The sintering procedure is confirmed by differential thermal analysis and thermal gravimetric analysis(TG-DTA).
采用高温显微镜、同步热分析、热膨胀实验等方法，系统的研究了亚微细硬质合金的烧结特性。
In this thesis, some test methods, such as Heating Microscope, DTA-TG, Thermal Dialation Testing, were used to research the sintering properties of cemented carbide in submicron grain, systematically.
在质量上熔融烧结熟料和死烧块状料优于葡萄状熟料，而还原料是所有热料中质量最差的。
The quality of molten sintering clinker and dead burned dense clinker is better than that of the grape like clinker, but the quality of clinker produced under reduced condition is the worst of all.
为回收烧结矿显热，研制出烧结环冷机余热锅炉。
The waste heat boiler of sinter ring cold machine was developed to recover sensible heat of sintering mine.
所述烧结包括保护气氛烧结、真空烧结、热压、热等静压、放电等离子体烧结。
The sintering treatment includes protective atmosphere sintering, vacuum sintering, hot pressing, hot isostatic pressing and spark plasma sintering.
结果表明，保护性高温烧结工艺的发热体可进行热态弯曲成形，表面没有发现裂纹，试样中的气孔已明显球化。
The result shows that the heating element of protect high temperature burning procedure could heat bend. No crack on the surface was found and pore was evidence spheroid.
热室用于压坯的脱脂、成份调整和烧结。
Its sintering chamber is used for defatting, adjustment of composition and sintering.
耐热输送带主要用于输送高温物料，如烧结矿、热焦炭、水泥熟料、热铸件等。
The heat-resisting conveyer belt is used for transporting high-temperature supplies, ore, hot coke, cement grog, hot casting, etc. such as friting mainly.
其特点是容易快速烧结，具有高致密度、强度和热阻，以及优良的体积稳定性能、抗钢水渗透冲刷性能和耐炉渣侵蚀性能。
The characteristics are sintering rapidly, possess high compactness, strength, heat resistant, volume stability, resisting molten steel permeability and eroding, corrosion resistant.
在不考虑横向烧结非均匀性的情况下，将烧结过程热状态描述为料层各带厚度的分布和迁移速度的变化。
Take no account of transversal heterogeneity, thermal state of sintering process is described as the change of the thickness of each zone in bed layer and migration rate.
采用热压、热等静压和真空、氢气中烧结工艺、可将上述材料制备成具有良好透明性的透明陶瓷。
The material can be prepared to transparent ceramic with excellent transparency with the processes of hot pressing, hot isostatic pressing and vacuum and hydrogen gas sintering.
应用推荐