同时，对湿法筑炉及其烘炉与烧结方法进行探讨。
Meanwhile, Wet methods of lining building, firing and sintering are discussed.
采用球磨和真空热压烧结方法成功制备氧化石墨烯/铜复合材料。
Abstract :Graphene oxide/copper (GO/Cu) composites were successfully synthesized through the ball milling and vacuum hot press sintering process.
由热压和液相烧结方法制得了具有各种莫来石含量和显微结构的莫来石—堇青石复合体。
Mullite - cordierite composites with various mullite contents and microstructures were prepared by liquid phase sintering and by hot pressing.
与其他烧结方法相比，激光烧结制备的纳米材料晶粒尺寸更为细小，组织结构更为致密。
Compared with other sintering methods, the nano-ceramic materials with the finer grain size and the higher density can be obtained by SLS technology.
指出要成功制备纳米硬质合金，关键在于控制烧结过程中WC晶粒的长大，探索新的快速烧结方法。
New fast sintering techniques should be employed because the key to obtaining nano-cemented carbide is to control the WC grain growth during sintering.
本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
为了保证均匀设计试验的整齐可比性，采用高温固相合成，而后高温烧结制得测试样品的方法。
In order to ensure the impartiality of the experiment data, the traditional high temperature solid synthesis and sinter method are used to prepare the sample.
采用正交设计和方差分析的方法研究了热压烧结温度、压力、时间对该砂轮性能的影响。
The effect of hot pressing sintering temperature, pressure and time on its properties are investigated by means of orthogonality rejection and variance analysis.
使用方法如电子束熔炼或选择性激光烧结。
Using methods like electron beam melting or selective laser sintering.
对石墨矿石采用不同的处理方法得到了原料石墨粉，再经高温烧结获得了高纯度合成金刚石所需的石墨粉。
Raw graphite powder made from graphite ores and treated by various methods was sintered at high temperature to obtain higher pure graphite powder for synthesizing diamond.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
采用特定的方法对金属烧结多孔材料进行表面改性和催化剂复合，开发出一种新型的催化蒸馏构件。
A new type of catalytic distillation column has been developed by means of surface modification and catalyst combination to sintered metal porous materials.
重点论述了涂层在发动机不同零件上的浆料成份及粘度、涂覆方法、烧结温度和工艺过程。
The coating of the slurry composition, viscosity, coating means, sintering temperature and coated technological process which is applied to different parts are studied.
阐述了专家系统在烧结工艺中的功能，分析了专家系统的组成和实现方法。
This paper expounds the functions of expert system in the sintering technology, and analyzes the components and implementing methods of expert system.
介绍了一种六角晶系铁氧体轴比及晶粒均匀性的控制方法，并对烧结磁体取向度的提高作了讨论。
In this paper, a control method of axis ratio and grain distribution of hexagonal ferrite is introduced, and improvement of sintered magnet orientation is discussed.
主要介绍了纳米陶瓷的制备方法，包括纳米陶瓷粉体的制备、成型和烧结。
Methods for the preparation of nano-ceramics including the preparation, molding and sintering of nano-ceramic powders are introduced in the paper.
运用模糊控制理论研制出烧结终点位置模糊控制模型。提出了前馈-反馈控制方法。
Developed the fuzzy control model of sintering burning-through-point with fuzzy theory, and put forward the feedforward-feedback fuzzy control method.
针对烧结终点控制提出前馈反馈模糊控制的方法。
A feedforward feedback fuzzy control scheme is presented for the control of sinter burn through point.
由于真空烧结涂层基体的硬度较低，采用对基体调质处理的方法来提高涂层基体的硬度。
Because the hardness of substrate was low after vacuum melting, the hardness of substrate was increased by hardening and tempering methods.
以碳化硅和碳为糊料的主要原料，采用素坯连接的方法焊接反应烧结碳化硅(RBSC)陶瓷。
A method of joining green state with carbide and silicon carbide was applied to join reaction-bonded silicon carbide (RBSC) ceramics.
介绍了风机现场动平衡的基本原理，提出适合烧结厂实际的风机动平衡方法，取得了良好的效果。
This paper presents the fundamental principle of fans′field dynamic balancing and puts forword ways of fans′dynamic balancing suitable to the real situation at the Sinter Plant.
本文在大量试验研究的基础上，应用神经网络方法和遗传算法对SLS的烧结过程和后处理过程进行了模拟和优化研究。
Using the neural network and genetic algorithms approaches, the SLS sintering process and its post-treatment process have been simulated and optimized on the basis of a series of experiments.
详细介绍了作为锂离子筛前驱体的锂锰氧化物和锂钛氧化物的制备方法，包括固相烧结法和液相反应法等。
Various preparation methods of lithium-manganese oxide and lithium-titanium oxide which act as precursors of lithium ion-sieves were introduced, respectively.
采用石灰石烧结熟料自粉化方法对从粉煤灰中提取氧化铝进行了研究，系统探讨了熟料烧成条件对氧化铝溶出率的影响。
It is studied on extracting alumina from fly ash by the way of limestone sinter and self powdering, discusses the influence of the sintered conditions of powder on alumina leaching.
介绍了超微银粉烧结过程，并且给出了用BET等温吸附方法测量烧结物表面积的结果。
A process for sintering submicron silver powders is described. The surface area of the sinter determined by the BET adsorption isotherm technique is given out in this paper.
对七种方法进行分析表明，红外线法是目前测定烧结混合料水分较为理想的方法。
As a result of analysis of these seven methods, it is concluded that the infrared moisture metering is an ideal method for mix moisture metering at present.
采用数据分析的方法建立了废气温度上升点、烧结终点、垂直烧结速度等参数的预报模型；
Predicted models of rising position of gas temperature, burn through point, vertical sintering speed, and so on, are established using dada analysis method.
论述了爆炸烧结的方法及装置，讨论了烧结过程的机理及影响其过程的主要参数。
This paper describes the method and device for the explosive sintering and discusses the mechanism of the sintering process and main parameters distributing to the process.
论述了爆炸烧结的方法及装置，讨论了烧结过程的机理及影响其过程的主要参数。
This paper describes the method and device for the explosive sintering and discusses the mechanism of the sintering process and main parameters distributing to the process.
应用推荐