本文叙述并分析了烧结终点微机控制系统的原理，提出了实用的控制方法和数学模型。
This paper describes and analyzes the principle of microcomputer system controlling sintering burn-through point, and provides its practical control methods and mathematical models.
烧结零件可以实现尺寸控制，因为注塑密度明显均匀，所以烧结收缩也是均匀的。
Dimensional control can be exercised on the as-sintered component as the injected density is sensibly uniform so shrinkage on sintering is also uniform.
新临钢炼铁厂通过建立循环经济生产模式，强化料场混匀工作控制，优化烧结配料比例，产生了巨大的经济和社会效益。
Enormous economic and social benefits were produced through establishing the production mode of circular economy, strengthening the control of blending yard and optimizing sinter burden proportion.
针对烧结终点控制提出前馈反馈模糊控制的方法。
A feedforward feedback fuzzy control scheme is presented for the control of sinter burn through point.
但原始激光束光强的不均匀分布影响了陶瓷改性的一致性，不利于激光烧结工艺的准确控制，严重者还会损坏陶瓷。
However, the intensity of original laser beam spot can not be distributed uniformly, which is bad for controlling the laser sintering condition. And the ceramics may be destroyed.
通过反复的试验和烧结机理分析对比，给出了最佳的控制参数。
Through repeating test and sintering theory is analyses, the best control parameters are given.
介绍了在烧结工程配料系统的控制设计中普遍采用的两种技术方案，即配料圆盘和皮带秤的同步与不同步调速问题。
In the paper, two controlling projects of sintering proportioning system were introduced, namely, synchronized and free running timing problem of proportioning disk and weight belt.
这篇论文主要研究了用粉末注射成形工艺制造各种高性能与功能烧结材料时，需要的显微组织控制。
This paper focused on the microstructural controls needed for various high performance and functional sintered materials through powder injection molding process.
介绍了一种六角晶系铁氧体轴比及晶粒均匀性的控制方法，并对烧结磁体取向度的提高作了讨论。
In this paper, a control method of axis ratio and grain distribution of hexagonal ferrite is introduced, and improvement of sintered magnet orientation is discussed.
烧结气氛的正确选择及其控制对烧结后部件的性能至关重要。
The right choice and control of the sintering atmosphere is very important for the properties of sintered components.
对铁基制品采用分解氨作烧结气氛时的脱碳原因进行了分析，探讨了几种控制脱碳的方法及途径。
The causes of decarburization in the sintering of ferrous products using dissociated ammonia as atmosphere are analysed and some methods and routes to control decarburization are discussed.
外配燃料的计量和控制是烧结工艺燃料分加技术的关键。
The metering & control for coating fuel is the key problem of fuel divided adding technique in sinter process.
本系统中的数字量由PLC控制，数字量主要控制真空系统、烧结炉和化学气相沉积炉中各通气管路中的开关量。
In the system the digital is controlled by PLC, digital is mainly used to control the switch data of pipeline in the vacuum system and metallurgical vessel and CVD vessel.
改造后的控制系统更规范、合理，自动化程度大幅度提升，极大提高了烧结矿质量和生产效率。
The control system is more normable and reasonable after improvement, automaticity, product quality and production efficiency of sinter mine are improved greatly .
结果显示，在本试验条件下，碱度为1.6左右的烧结矿不具有混合控制图的线性关系。
The analysis indicates that sinters with alkalinity in the neighborhood of 1.6 do not exhibit the linearity as shown in the hybrid control diagram.
因此如何控制烧结过程中晶粒长大成为亟需解决的问题。
It's necessary to study how to control the growth of grain size during the sintering process.
在烧结的第二阶段，一级与二级颗粒的烧结同时进行，但压块的烧结是被一级颗粒的烧结所控制。
In the second stage, sintering of primary and secondary particles occurs simultaneously, but the sintering of the compact is controlled by the primary particles.
并且通过对材料烧结工艺的控制，可以在比较大的范围内改变磁导率的调节速度。
Through control on sintering processing of materials the tunable rate of permeability is able to control in the large range.
介绍了由PLC组成的烧结燃料上料自动控制系统。
The paper related the automatic control system of sintering fuel-charge mixfure supply which consists of PLC.
技术支撑：大异制品的成形、烧结技术与设备，显微结构控制技术。
Technical support: technologies and equipment for pressing, sintering of large products, technologies for controlling of microstructures.
介绍了可编程控制器GEM80／163在烧结成品取制样控制系统中的应用，较详细地说明了所实现的功能和系统的特点。
The application of programmable controller GEM80/163 in sampling and preparation control system is described. The functions and characteristics of the system are depicted in detail.
指出要成功制备纳米硬质合金，关键在于控制烧结过程中WC晶粒的长大，探索新的快速烧结方法。
New fast sintering techniques should be employed because the key to obtaining nano-cemented carbide is to control the WC grain growth during sintering.
运用模糊控制理论研制出烧结终点位置模糊控制模型。提出了前馈-反馈控制方法。
Developed the fuzzy control model of sintering burning-through-point with fuzzy theory, and put forward the feedforward-feedback fuzzy control method.
采用了一种三段规则的模糊控制策略，对真空烧结炉的温度进行控制。
We adopt a rule of three steps fuzzy control system applying to temperature control of vacuum sintering furnace.
通过程序调试、修改，最终实现了对连续烧结炉零件输送的控制。
Through the program debugging, revision, we have finally realized to control the continuous sintering furnace parts transportation.
通过专家规则将烧结状态透气性预测的结果用于指导铅锌烧结过程的优化控制。
Am optimized control over sintering process is guided by the result of permeability calculation through expert rules.
介绍了安钢烧结厂混匀料场的工艺流程、控制系统的组成结构、功能及自动配料系统的应用和效果。
The paper introduces the process of mixing material spot in Angang sinter factory, structure of control system, function and its automatic charging system.
通过烧结杯试验，找出了宣钢原料条件下烧结矿合理化学成分、烧结矿低硅条件下各种化学成分的控制范围。
With sintering pot test it is found out the reasonable chemical component in sinter under the condition of Xuan Steel as well as the control range of various components for low-silicon sinter.
论文的最后给出了一个工业回转窑烧结温度专家控制器的设计。
Finally, an expert controller's design of sintering temperature of industrial rotary kiln is discussed.
对烧结系统环冷机运行过程中出现的打滑问题进行分析，通过增设打滑监视控制装置，实现了速度自动跟综监视控制。
The skid in operation of circular cooler in sintering system is analyzed, and automatic speed-tracing supervisory control realized by means of a skid supervisory system.
应用推荐