介绍了选择性激光烧结技术的工作原理。
The operating principle of the selective laser sintering technology was introduced.
最后总结了选择性烧结技术的发展前景。
The prospect of selective laser sintering technology is summarized.
本文介绍了一种新型压制阴极的成型与烧结技术。
The paper introduce the moulding and sinter technology of a new kind of tyrannous cathode.
采用松装烧结技术在不同条件下制备出多孔钛板。
The porous titanium plates were prepared by loose powder sintering technology.
最后,提出了选择性激光烧结技术进一步研究的方向。
Finally, the coming study directions of selective laser sintering technology are described.
简述了近年来国内外等离子体活化烧结技术的新进展。
The recent developments of the plasma activated sintering technology are briefly stated in this paper.
最后,提出了选择性激光烧结技术进一步研究的方向。
Finally, the coming study directions of selective laser sintering technology are describe...
利用放电等离子烧结技术尝试烧结出了超细纯碳化钨粉。
Attempt to sinter ultrafine Pure WC by spark plasma sintering was made.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
技术支撑:大异制品的成形、烧结技术与设备,显微结构控制技术。
Technical support: technologies and equipment for pressing, sintering of large products, technologies for controlling of microstructures.
结论采用粉末烧结技术研制的多孔板的特性满足水升华器的性能要求。
Conclusion Porous plates developed by making use of sintered powder technology could meet requirements of performance of water sublimator.
用放电等离子烧结技术将WO3和炭黑的混合粉原位合成为致密的wc块体。
The mixed powder of WO3 and carbon was in-situ synthesized to get the dense WC bulk by a spark plasma sintering technique.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金粉末复合在碳素钢的表面。
Steel-bonded cemented carbide powders being compacted by explosive compaction were bonded to the surface of carbon steel using liquid phase sintering.
厚料层烧结是一项很重要的烧结技术,具有改善烧结矿质量,降低燃料消耗等优点。
As a important sintering process, the deep-bed sintering play the roles of improving sinter quality and decreasing fuel consumption.
结果表明,微波等离子体烧结技术与常规法相比,其烧结时间明显缩短,性能有所改善。
The result indicates that the microwave plasma sintering can short the sintering time and improve the properties of CaZrO3 ceramics as compared with the routine methods.
指出了选择性激光烧结技术成型金属零件所存在的一些问题和选择性烧结技术的发展前景。
Some existing problems of forming metal parts by selective laser sintering technology were pointed out. The development prospect of the technology was summarized.
电火花烧结技术是一种新型的快速烧结技术。具有升温速度快、烧结时间短、效率高等特点。
Spark plasma sintering (SPS) is a type of novel fast sintering technology, which is characterized by high heating rate, short sintering period and high efficiency.
目前,国内外研究者主要是通过改进传统烧结技术或采用新型烧结技术烧结制备纳米复相陶瓷。
Nanocomposite ceramics are prepared by improving traditional sintering techniques or take new sintering techniques in the present years.
间接法选择性激光烧结技术制备金属件的后处理工艺包括脱脂、预烧结、高温烧结以及渗金属。
The post-processing of indirect SLS includes debinding, pre-sintering, high temperature sintering and metal infiltration.
该方法主要包括三个部分:(1)利用放电等离子烧结技术实现氮化铝陶瓷的较低温度烧结;
The method comprises: (1) sintering aluminum nitride ceramic at a low temperature by plasma-discharging sintering;
脉冲大电流快速烧结技术是材料制备新技术之一,具有很大的发展潜力,但烧结机理一直存在争议。
Pulse electric current sintering is an advanced technology for materials synthesis and processing with potential application. But the sintering mechanism is in dispute.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、高烧结矿强度、低燃料消耗等优点。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
针对太钢高炉的炉料结构和烧结原料特点,分析了在该厂推广应用小球团烧结技术的必要性和前景。
Point at the properties of Taigamg BF burden composition and the raw material of sintering, the necessity and outlook of using MPS technique were analyzed.
一个减少,变薄虚拟假体设计的基础上,面部图像和快速原型蜡成用选择性激光烧结技术的假体转换。
A decreased and thinned virtual prosthesis was designed based on the facial image and converted into a rapid prototyping wax prosthesis using a selective laser sintering technique.
介绍选择性激光烧结及烧结技术的基本原理,探讨了树脂基复合成型材料选择性激光烧结工艺及参数。
The basic theories of selective laser sintering and its sintering technique are introduced, and the sintering process and parameters of the resin-based prototyping composites are discussed too.
低碳厚料层烧结是一项重要的烧结技术,具有改善烧结矿质量、提高烧结矿强度、降低燃料消耗等优点。
Low carbon and thich sinter bed sintering is an important sintering technology, featuring the advantages of high quality, high strength and less fuel consumption.
通过理论和实践分析,探讨了采用“温压技术和颗粒界面液相烧结技术”生产发动机连杆(典型零件)的可能性。
The possibility of forming connection rods of engines by "warm pressing and liqUid phase sintering on boundary of particles " is explored in theory and experimentally.
采用液相烧结技术成功地将爆炸压制后的钢结硬质合金混合粉末(对应国家牌号TLMW50)复合在碳素钢的表面。
Steel-bonded cemented carbide powder mixture(TLMW50) processed by explosive compaction was successfully bonded to the surface of carbon steel through liquid phase sintering.
本文叙述了新的PM技术如超细粉制造技术、快速凝固制粉技术、机械合金化技术、液相烧结技术、快速固结技术等。
The new PM technology has been introduced, such as superfine powder manufacture, rapid solidification processing, mechanical alloying, liquid phase sintering, rapid consolidation etc.
介绍了微波烧结原理与特点、微波烧结设备与工艺参数以及微波烧结技术在陶瓷材料领域中的应用和所取得的研究成果。
Principles, characteristics and equipment of microwave sintering are introduced for ceramics. This paper introduced the coefficient of microwave sintering and its application technic.
应用推荐