根据试验数据。确定了合适的烧结工艺参数。
Based on the testing data, the suitable sintering process parameters were defined.
根据输出结果成功进行激光烧结工艺参数优化。
The laser sintering parameter was optimized successfully according to exported results.
金属粉与铬酐的质量比、甩液、烘干和烧结工艺参数。
These include mass ratio of metallic powder to chromium trioxide and technological parameters of paint throwing off, drying and sintering processes.
试验和分析结果将为建立非等温烧结模型和烧结工艺参数的优化方法提供依据。
The experimental and analytical results make the reference for building the non-isothermal sintering model and for the optimization of sintering process parameters.
对于各种粉末材料在选择性激光烧结成形过程中温度场的模拟与预测，是合理选择其烧结工艺参数的基础。
The simulation and prediction of sintering temperature field in SLS process play a basic role in determining the optimal processing parameters for different powder materials.
在分析宝钢烧结配矿方案、工艺参数以及产质量指标三者相互关系的基础上，提出了两种优化烧结工艺参数的数学逻辑模型。
Two kinds of optimization logic model of sintering process are put forward after analyzing the relation of mix ore scheme, process parameters and product quality index of Baoshan iron plant.
研究了合金成分、烧结方式、工艺参数等对表层缺立方相碳化物形成过程的影响。
The influence of alloy contents, sintering method and process parameters on the formation of surface layer deficient in cubic carbide has been studied.
研究了原料粉末性能、烧结温度和时间、热处理的工艺参数对高密度钨合金的塑性的影响。
The effect of the performance of raw powder and process parameter such as sintering time & temperature , heat treatment time & temperature on the plastication of tungsten alloys has been studied.
通过优化烧结时间和烧结温度等工艺参数，铬环靶材的烧结成本大大降低。
Through optimizing the process parameters including sintering time and sintering temperatures, the sintering costs of ring Cr-target are decreased greatly.
介绍选择性激光烧结及烧结技术的基本原理，探讨了树脂基复合成型材料选择性激光烧结工艺及参数。
The basic theories of selective laser sintering and its sintering technique are introduced, and the sintering process and parameters of the resin-based prototyping composites are discussed too.
研究了液态硅参与下的反应烧结碳化硅的工艺参数、显微组织对其电阻率的影响。
The relationship of technological parameters and microstructure to the resistivity of reaction-bonded silicon carbide(RBSiC) in the presence of liquid silicon was studied in this paper.
对烧结温度、烧结时间等工艺参数对材料力学性能、微观结构和致密度的影响进行了分析。
The influence of sintering temperature and holding time on the density, micro-structure and mechanical properties of the ceramic tool materials are studied.
并对制备过程中的压制压力、烧结温度和烧结时间等工艺参数对材料密度、硬度和组织的影响进行了研究。
We studied the effect of suppress pressure, sinter temperature and sinter times on density, hardness and structure of the materials in the course of preparation.
本文叙述了冷等静压-烧结-液体浸铜工艺制取高密度高性能钨-铜触头的工艺过程、工艺参数控制及使用设备。
The process, technological parameters and equipments for producing W-Cu contact with isostatic pressure-sinter infiltration in copper bath were described.
叙述了鼓风返烟烧结机的投产实践，介绍了工艺参数的确定，生产过程的控制，出现的问题及解决措施。
The paper describes the practice of put into operation for up-draught gas back sintering machines; introduces technical parameters determined and production control and solve measures for problems.
本文就铁精矿球团烧结的部分工艺参数进行了试验研究和理论探讨，指出了球团烧结的部分最佳工艺参数。
In this paper, some technological parameters of pelletized sintering are studied experimentally and discussed theoretically, and the optimum parameters are given out.
粉煤灰的颗粒组成、粒度分布是影响高掺量粉煤灰烧结空心制品坯料成型工艺的重要参数。
Fly ash grain composition, particle size distribution are the important process parameters that effect the molding of body stock of high content fly ash sintered porous product.
采用不同的燃料配加工艺，其混料造球、燃料分布及烧结过程参数等均会不同，最终获得的技术经济指标也有所差异。
Adoption of different fuel addition process results in different mixed material balling, fuel distribution, firing process parameters and technical and economical indexes.
研究了钾钙肥生产的工艺参数(原料配比、烧结温度及烧结时间)。
A study is made of the process parameters in the production of a potassium calcium fertilizer, such as the proportion of raw materials, sintering temperature and duration of sintering.
探讨了混粉工艺、烧结气氛、压制压力、烧结温度等工艺参数对材料组织和性能的影响。
The microstructure and mechanical properties was investigated by varying process parameters such as power blending technique, pressure, sintering atmosphere, sintering temperature.
考虑到放电等离子烧结的一步成形工艺，将粉末材料的热电性能参数假设为温度和密度的双变量函数。
Considering the single step processing technique of SPS, the thermal-electrical properties parameters of powder material were assumed as bivariate functions of temperature and the relative density.
介绍了微波烧结原理与特点、微波烧结设备与工艺参数以及微波烧结技术在陶瓷材料领域中的应用和所取得的研究成果。
Principles, characteristics and equipment of microwave sintering are introduced for ceramics. This paper introduced the coefficient of microwave sintering and its application technic.
介绍了微波烧结原理与特点、微波烧结设备与工艺参数以及微波烧结技术在陶瓷材料领域中的应用和所取得的研究成果。
Principles, characteristics and equipment of microwave sintering are introduced for ceramics. This paper introduced the coefficient of microwave sintering and its application technic.
应用推荐