全氧烧嘴，隔热材料，导电臂备件。
Oxy Fuel Burners, insulation material, spare parts for CC-Arms.
用阿尔康设计的烧嘴可以保证更可靠的工艺指标。
More reliable performance is assured by the alcorn burner design .
煤粉气力输送管道、喷吹系统、粉煤烧嘴点火器等。
This system consists of fine coal pneumatic conveying system, fine coal. injector, ignitor with coal burners, etc.
本文介绍了MYS 型煤气亚高速烧嘴的研究成果。
同时改进烧嘴结构，使雾化效果更好，燃烧更加完全。
The effect of atomizing is better and burning is more full by improving nozzle structure inside and outside.
烧嘴混合炉头具有短焰，宽范围，非常稳定燃烧的特点。
The NOZZLE MIX burners feature short flames, wide turndown ranges and very stable combustion.
概述辐射管的类型、辐射管用烧嘴以及辐射管的余热回收。
The types, used burners and residual heat recuperation of radiant tubes are presented.
对复合自身预热烧嘴、脉冲燃烧控制技术进行了重点介绍。
The dual self-preheating burner and pulse burn control technology are emphatically introduced.
选用高速脉冲烧嘴，搅拌能力强，燃烧充分，传热效率高。
Complete combustion and high heat transfer efficiency are achieved through the strong stirring ability produced by high-speed pulse burners.
试验结果表明，组合式烧嘴能满足锻烧水泥工艺生产的要求。
It is shown that the combined burner could meet the demand of cement calcining.
该烧嘴综合高风温无焰燃烧、分区燃烧及烟气再循环等技术；
Research shows that the burner is based on high-temperature air combustion, zoned combustion and exhaust gas recycle.
广泛与各类工业炉窑烧嘴配套使用，实现自动点火和安全燃烧。
It is widely used with burners of various industry kiln, and realize auto. ignition and safety combustion.
在烧嘴特性不清楚或者更换旧烧嘴时，这是一款理想的混合器。
It is an ideal mixer to use when the burner characteristics are not fully known or when the burner area is to be changed.
目前，我国大多数单侧上烧嘴约热炉均采用顺流的辐射换热器。
Most of top one-way-fired soaking pits in China use parallel flow radiation recuperators now.
介绍一种套筒式煤气烧嘴烘烤装置及其在钢包烘烤中的成功应用。
The ladle drying device with a sleeve type gas burner and its application in the ladle drying is introduced.
这对于确保天然气高速烧嘴的顺利点火与正确使用具有重要意义。
It is significant for guarantee the smooth ignition and used correctly of the natural gas high speed burner.
SW钙土平焰炉头是一款烧嘴混合过量空气炉头，辐射加热设计。
The SW Sidewinder Flat Flame burner is a nozzle mix excess air burner designed for radiation heating.
配合点火探测电极和燃气电磁阀用来完成烧嘴的自动点火和熄火保护。
Match with the ignite electrode, detect electrode and gas solenoid valve to realize the burner auto. ignition and flame-out protection.
应用结果表明，该烧嘴具有混合性能好、燃烧完全、节能及长寿等优点。
The application results show that the burner has advantages of good mixing property, complete combustion, energy-saving, long service life and so on.
在单烧嘴均热炉采用脉动火焰加热，根据模型实验结果，组织了工业试验。
The model test of jet angles was studied for impulse flame heating in top one-way fired pit.
首先介绍了系统测温原理和图像处理方法，再给出了烧嘴调试试验的结果。
This paper firstly described temperature measurement principle and image processing method of this system.
广泛应用于各行业工业炉窑燃烧控制系统及大气烧嘴加热系统的火焰控制中。
It is widely used on flame control in the combustion control system and air-burner heat system of various industry kiln.
介绍了烧嘴的结构和技术要求，烧嘴的实验装置和步骤以及实验结果与分析。
The paper describes the burners about their structure, technical requirement, experimental equipment and procedure as well as the experimental results and analysis.
通过对烧嘴结构进行改造，研制出了PW型新烧嘴，并取得了较高的经济效益。
Through modifying the burner structure, a new PW-type burner was developed, and quite good economical benefit was obtained.
介绍了国产化四烧嘴侧面对置式气化炉和单烧嘴顶置式气化炉的基本结构和工艺特点。
The basic configurations and process characteristics are presented of a localized laterally opposite four-burner gasifier and a top single-burner gasifier.
为解决隧道式淬火炉炉温分布不均匀的问题，采用了高速调温烧嘴脉动燃烧控制技术。
In order to reach uniform temperature distribution in tunnel bogie hearth furnace, the technology of pulse firing control of high velocity burner with air diffusion is proposed.
使用结果证明：对于单侧上烧嘴均热炉，辐射-对流组合式换热器有着明显的优越性。
The application results demonstrate that the combined radiation and convection recuperator has remarkable advantages for top one-way-fired soaking pits.
介绍平焰烧嘴在马弗炉中的应用效果，炉子结构特点，主要设计指标与投产后实际指标。
To introduce the application effect of emissive flame nozzle on muffle, the structure characteristics of muffle, main design targets and real targets of production.
为了节省时间，可采用在低温下供应大量暖空气的承包商适用的烧嘴（通常是丙烷烧嘴）。
To save time a contractor's fit for purpose burner (usually a propane burner) supplying large amounts of warm air at low temperature can be used.
为了节省时间，可采用在低温下供应大量暖空气的承包商适用的烧嘴（通常是丙烷烧嘴）。
To save time a contractor's fit for purpose burner (usually a propane burner) supplying large amounts of warm air at low temperature can be used.
应用推荐