“共晶”是指一种元素或者化合物的组合，它可以在比任一成分单独时的凝固点更低的温度下保持液态。
"Eutectic" refers to a mix of elements or compound that remains liquid at lower temperature than either of its components does alone.
显然生产商需要知道产品的共晶点，而且需要使用仪器保证产品的温度是均一的。
Obviously, the manufacturer should know the eutectic point and have the necessary instrumentation to assure the uniformity of product temperatures.
经验证明，过冷现象容易发生至使制品温度虽已达到共晶点。
Experience proves, supercooling phenomenon is easy to occur to make products temperature has reached the eutectic point.
并且研究了非晶碳薄膜的场发射特性，计算了薄膜的功函数、实际发射面积和发射点密度。
The field emission properties were studied, and the work function, actual emission area and density of emission spot were calculated.
在升温的第一阶段(大量升华阶段)，制品温度要低于其共晶点一个范围。
In the first stage (large heating sublimation stage), product temperature lower than the eutectic point of a range.
本研究以新鲜香菇为实验材料，测定其共晶点和共熔点。
The article determined the eutectic point and eutectic point using fresh Letinus edodes as the material.
为了对苦瓜汁进行真空冷冻干燥，首先通过简单的电阻装置测定了苦瓜汁的共晶点与共融点。
The eutectic temperature and eutectic point of Momordica charantia juice were measured by using a simple apparatus.
产品的冷冻温度应低于它的共晶点。
Typically, the product is frozen at a temperature well below the eutectic point.
在一些案例里，生产商不知道产品的共晶点。
In some cases, manufacturers are unaware of the eutectic point.
电阻浆料存在最佳峰值烧成温度。理论分析表明，最佳峰值烧成温度应在软化点与峰值析晶温度之间，靠近起始析晶温度。
The best peak firing temperature was existed, which was between the softening temperature and the peak crystallization temperature, and near the incipient crystallization temperature of the glass.
提高PP塑胶制品的透明性及表面光泽度，在吹膜过程当中可减少薄膜表面晶点，并使薄膜制品表面具有平滑度高，光亮度佳的优点。
To improve the transparency and PP plastic products, in the film surface gloss process can reduce the film surface crystal, and make the film surface smoothness, high brightness is better.
本文介绍一种新颖的智能共晶点测试仪。
This paper introduces the intelligent measurement instrument for new eutectic.
随着晶场随机浓度的减小，三临界点被抑制，同时出现了二级相变线的重入现象；
When the random concentration of the crystal field decreases the tricritical point is depressed, at the same time the reentrant phenomenon occurs.
介绍以粉煤灰为主要原料代替传统的矿物原料，在化学计量比点成功地合成了堇青石微晶玻璃。
The cordierite glass ceramic is successfully synthesized using the coal ash as the primary starting material in lieu of the traditional mineral material at the proper chemical ingredient ratio.
不知道产品的共晶点，对于不正常的循环的评价是困难的。循环参数需要指导主干燥。
It would be difficult for a manufacturer to evaluate partial or abnormal cycles without knowing the eutectic point and the cycle parameters needed to facilitate primary drying.
介绍了激光重熔在面阵列封装钎料凸点成形中的研究进展，并且对PBGA共晶钎料球激光重熔进行了工艺研究。
Research status of laser reflow on solder bump forming of area array packages are introduced, and experimental analysis on laser reflow of PBGA solder ball is performed.
通过X射线粉晶衍射成分分析，结合岩石点荷载强度试验研究，查明国内外首次发现的此隧道部分砂质泥岩发生岩爆活动的内在原因。
Through the X-ray diffraction analysis and point loading strength test, intrinsic causes for the rockburst in some sandy mudstones in Erlang mountain highway tunnel has been ascertained.
通过正交试验对预冻时间和升华干燥时间进行了分析，测量了黄瓜的共晶点温度和干燥时间。
With the help of the orthogonal experimentation we analyse the academic number of the Pre-freezing and sublimation-drying time, measure co-crystal temperature and the drying time.
量子点，又叫做无机纳米晶，由于其作为荧光探针在生物领域中的巨大应用前景，已引起生物学家们的广泛关注。
Quantum dots (QDs), also known as semiconductor nanocrystals, have drawn significant attention for their potential as fluorescent probes in biological field.
钙钛矿型纳米晶可以克服传统无机半导体量子点的某些缺陷，以达到热电子的缓慢冷却和高效提取。
Colloidal perovskite nanocrystals can overcome the limitations of traditional inorganic quantum dots and achieve slow hot carrier cooling and efficient extraction.
而黄铜板的腐蚀形貌以表面颜色逐渐变红、腐蚀产物的增加、点蚀的增加、严重的晶界腐蚀为主。
The surface morphology of brass plate was changed too, the color of brass gradually turned red, the corrosion products and pitting increased, obvious intergranular corrosion appeared.
本文对（准）共晶系的融点和融解热进行了分析预测，得到了共晶混合物融点，融解热与组分物性（融点、融解热、比热）间的关系及两个推论。
Eutectic and co-melting point of different materials were determined by DSC, and the effect of different solutes on the Eutectic and co-melting point of materials were discussed.
在生产的初始阶段，薄膜表面会产生‘晶点’或杂质。
In the initial stage of production, the film surface will produce "crystal point or impurity."
晶点照明有限公司是上海一家专业的家居饰品及家居用品生产厂家，产品主要有：椰壳木花器、花插；
We are a professional company who major in South-east Asia style home accessories of design, manufacture and sale.
本发明还涉及利用该装置测量导热系数、共晶点和共熔点的方法。
The invention also relates to a method for measuring the heat conduction coefficient, the eutectic point and the congruent melting point by the device.
一串制程因子的实验设计，以晶圆薄膜厚度近九点量测。
A fairly large fractional factorial experiment on epi growth was performed, with spatial measurements of thickness and resistivity.
由于这些加工点大都处于偏僻的乡村，大大降低了各项生产成本，因而“晶缘”水晶一直具有较强的加工能力和较好的价格优势。
As a result of these processing in the most remote villages and greatly reduce the cost of production, Hence, "Crystal fate" Crystal has been a strong processing capacity and better price advantage.
由于这些加工点大都处于偏僻的乡村，大大降低了各项生产成本，因而“晶缘”水晶一直具有较强的加工能力和较好的价格优势。
As a result of these processing in the most remote villages and greatly reduce the cost of production, Hence, "Crystal fate" Crystal has been a strong processing capacity and better price advantage.
应用推荐