根据需要，炉内气氛可以是普通气氛、保护气氛或真空。
According to need, furnace atmosphere, protective atmosphere or vacuum can be a normal atmosphere.
得出结论：降低出炉温度、缩短在炉时间及控制了炉内气氛是关键。
It is concluded that to reduce temperature from furnace, shorten time in furnace and control atmosphere in furnace are the key points.
研究表明，分别以丙烷气和天然气为原料气制备吸热式可控气氛炉气时，天然气要优于丙烷气。
The results showed the natural gas is better than propane when natural gas or propane is used for controllable atmosphere.
研制的氮基可控气氛连续钎焊炉，成功地解决了钢质零件的铜钎焊问题。
It dealed with the problem of brazing of steel hardware and copper that nitrogen base controlled atmosphere continuous brazing furnace.
由工业控制计算机实现的浸没熔炼过程控制系统能有效地控制炉内的氧化还原性气氛。
The control system for the sirosmelt furnace process which implemented by industrial control computer can control the atmosphere of oxidizing-reducing process in the furnace effectively.
应用环保设计思想，进行了一种可控气氛多用途精密电热炉的设计。
Environmental protection design concept was introduced in this article to design a controllable atmosphere multipurpose precision electrothermal furnace's design development.
化学表面改性处理通常在气体介质炉中进行，温度、保温时间及气氛的控制很关键。
The chemical surface modifying heat treatment is usually undertaken in a gas medium furnace with the temperature, soaking time and atmosphere control being as key points.
介绍氮基气氛辊底炉热处理生产线的设计特点。
The design features of roller hearth furnace heat treat production line with nitrogen based atmosphere are introduced.
针对传统气氛炉的温度均匀性差、自动化程度低、冷却速度慢等一系列问题提出全面优化设计方案，并取得了良好的效果。
Comprehensively optimal design plans for the conventional controlled atmosphere furnace were proposed to counter its bad temperature uniformity, low automatic control level and low cooling speed.
本文是采用氮、甲醇基渗碳气氛渗碳，对炉内气氛进行计算。
The furnace atmosphere was calculated under the condition of carburizing in the nitrogen-methanol based atmosphere in this paper.
控制气氛热处理的炉气成分对热处理后钢的表面成分有很大影响。
The gas composition of the controlled atmosphere for the heat treatment affects greatly the surface contents of the steel after heat treatment.
在热处理的过程中，工件相互间无碰撞，均衡的通过炉膛加热，加上可控气氛的作用下，阻止空气进入炉内。
In the heat treatment process, no collision between the workpiece and balanced by furnace heating, plus under the influence of controlled atmosphere to prevent air entering the furnace.
天然气锅炉燃烧控制系统的任务是节约能源、改善炉内气氛、减少环境污染。
The task of gas boiler combustion control system is energy-saving, atmosphere improvement in boiler chamber and reducing pollution.
主要研究在多气氛真空烧结炉中，通入不同的气氛对合金烧结后性能的影响，从而为烧结工艺的改进提供参考。
It is studied that sintering atmosphere effect on properties of cemented carbide, and giving some reference for improvement of sintering process.
调质热处理工艺对原材料、炉温控制、炉内气氛控制、淬火介质等都有严格的要求。
Quenching and tempering heat treatment process for raw materials, temperature control, controlled atmosphere furnace, quenching medium, such as strict requirements.
可控气氛箱式炉的质量管理，首先要建立包含各类制度、规范的全面的管理程序。
As for the quality management of controlled atmosphere box furnaces, the overall management procedure should first be set up which includes various rules, regulations and standards.
炉内气氛可控，温度均匀，炉内可通入氢气，氮气，氩气等。
Even temperature, You can pass over the hydrogen, the nitrogen, the argon in the stove.
针对可控气氛发生炉炉气成分对热处理炉内碳势的影响，对吸热式可控气氛发生炉不同的原料气进行分析比较。
Based on the influence of the producing gas components made for the carbon content, the changing for the content of the atmosphere components is analyzed.
将其中试样A通过氧化-还原处理，表面具有层状结构，与另一脱碳试样B一起放入改造后的电阻炉内在通氢气的气氛中进行渗碳淬火。
Sample A whose surface has layer structure via oxidize-deoxidize treatment and sample B which is decarbonization are put into resistance furnace for carbonization and quencher under hydrogen.
介绍了气氛烧端炉的设计思路、结构特点、主要技术参数及应用范围。
This paper introduces the design idea, structure characteristic, major technology parameter and application of gas shielded shoe sintering furnace.
用自制一氧化碳发生炉提供的还原气氛，在管式炉中仿制了铜红釉试片。
The sample of red copper glaze was imitated in pipe furnace under the reduction atmosphere offered by self-making co reaction furnace.
介绍明火燃气加热炉的结构及炉内气氛控制系统，分析炉内气氛对钢丝热处理工艺的影响。
To introduce the structure and atmosphere control system of oil burning open fire furnace. The effect of atmosphere in the furnace on heat treatment process is analyzed.
对多用炉的气氛方案和管道系统进行技术改造，在各方面都产生明显的变化，创造了可观的效益。
After gas program and piping system of multi purpose gas furnace were reformed technically, remarkable changes have taken place in many aspects and considerable benefit has been created.
针对传统可倾式渗碳转筒炉无法精确控制碳势的缺点，设计制作了可控气氛转炉并进行了试生产。
Considerate that normal rotary hearth furnace can't control the carbon potential precisely, we designed rotary hearth furnace with controlled atmosphere and then managed to use it in manufacturing.
介绍了新研制的预抽真空式可控气氛气体渗碳炉。
A newly developed BBH pre - vacuum - pumping carburizing furnace has been introduced in this paper.
负压渗碳的设备是对真空炉进行改造，使得真空炉能够进行真空烧结和气氛负压渗碳。
The vacuum furnace is adapted to meet both vacuum sintering and carburizing at negative pressure.
目前对煤的转化系统和CS_2反应炉等接触含硫介质设备的设计，要求提供合金在含硫气氛中的腐蚀数据。
Corrosion data was required in coal inversion system or CS2 furnace for commercial alloys used in sulfur-containing gas.
旋转炉外炉体密封、抽真空和通入保护性气氛。
The furnace body of the outside furnace of a rotary furnace is sealed, the air is vacuumized and protection atmosphere is input.
优点：耐高温，抗腐蚀，荷重软化点高，适合在各种气氛条件下的高温炉中使用。
Advantage: Bear the heat, the anti - decay, refractoriness under load is high. It is suitable to be used in different high temperature kiln stove.
优点：耐高温，抗腐蚀，荷重软化点高，适合在各种气氛条件下的高温炉中使用。
Advantage: Bear the heat, the anti - decay, refractoriness under load is high. It is suitable to be used in different high temperature kiln stove.
应用推荐