液压振动,液压转向,动力换挡驱动。
Hydraulicvibrating and steering, Back wheel mechanical drive.
全液压转向系统具有明显的不足转向特性。
The characteristic of the full hydraulic steering system characteristic has obvious insufficiency.
液压转向,铰接车架。
本实用新型适用于可电控汽车液压转向助力泵。
The utility model is suitable for the electric vehicle hydraulic power steering pump.
全液压转向系统一般用在斗容量较小的装载机上。
Full hydraulic steering system is generally used on loaders of small capacities while its application on medium sized units is introduced in this article.
液压转向泵装在空气压缩机的后面,通过十字块驱动。
Hydraulic steering pump is assembled behind of air compressor and is driven by cross block.
液压振动,液压转向,操作简单,灵活自如,性能稳定。
Hydraulic vibration, hydraulic steering, the operation is simple, flexible, stable performance.
齿轮侧传动行走,液压振动,液压转向,三挡速度,转场方便;
Mechanical travel drive of side transmission, hydraulic vibration and steering with three-gears travel speed for convenient transport between construction sites.
采用双泵合流全液压转向系统,操作轻便、灵活,性能稳定可靠。
6 double pump confluence full hydraulic steering system, easy operation, flexible, stable and reliable performance.
本文首先分析了全液压转向系统的工作原理和各液压元件之间的关系。
Firstly, the working principle of FHPSS and the relationship among those components are analyzed.
全液压转向装置,中间铰接折腰转向,转弯半径小,操纵灵活,作业效率高。
Full hydraulic steering equipment, central hinge in connection to roll-waist, small turning radius, flexible operation, high work efficiency.
全液压转向装置,中间铰接折腰转向,转弯半径小,操纵灵活,作业效率高。
The full-hydraulic steering mechanism, with retractable steering articulated in the middle, at small turning radius, features flexible and efficient operation.
分流液压转向系液压机组的台架试验,是对系统设计和装车前的重要研究手段。
The bed test of the hydraulic unit of the hydro-steering gear in the power split transmission is the crucial research method for system design and prior to road test.
采用全液压转向系统、钢圈压配式实心轮胎和具有报警功能的新型中央式仪表板。
The tractor adopts fully hydraulic steering system, steel ring press-fitted solid tires and central control panel with alarming function.
转弯半径小,更加灵活,液压转向系统,转向灵活。先导操作液压体统,操作方便。
The small turning radius, more flexible, hydraulic steering system, flexible steering. The pilot operation of hydraulic system, easy to operate.
全液压转向系统是由液压泵、优先阀、转向器、转向油缸以及相关的转向机构组成。
FHPSS consists of hydraulic pump, initiative valve, steering control unit, steering cylinder and so on.
依据功率键合图原理,研究BZZ5型液压转向器和负荷传感全液压转向系统的建模方法。
Based on the principle of power bond graphs, the modeling method for the hydraulic steering control unit type BZZ5 with the load sensing hydraulic steering system is introduced.
CAN总线技术能够解决其液压转向系统协同工作的控制问题,实现平板车行车的智能控制。
With CAN-bus technology, problem to control cooperated operation of its hydraulic steering system can be settled and intelligent control for the trailer travel is realized.
因而,对BZZ系列全液压转向器的工作原理和常见故障的了解,有助于提高生产工作效率。
Thus, to work principle and common trouble of the BZZ series hydraulic redirector understanding, that is helpful to enhance production working efficiency.
本文介绍了工程车辆全液压转向系统的设计,应用adams软件建立了转向系统的动力学模型。
This paper introduces the design of full-hydraulic steering system used in construction vehicles and USES the ADAMS software to set up a dynamic model of steering system.
液压转向机构在使用中容易出现的问题主要有转向沉重、转向跑偏、转向发摆和转向时有异响噪声等。
Hydraulic steering easier in use problems are mainly the heavy steering, steering deviation, steering and steering made from time to time before the noise, such as abnormal sound.
根据液压转向助力器的结构和转向系统的工作原理,介绍了一种转向助力器检测回路的设计和测试原理。
According to the structure of hydraulic steering boosters and the work principle of steering system, design of the test circuit and test principle for a steering booster are introduced in the article.
该系统由转向电子控制单元(ecu)、全液压转向器、步进电机、步进电机驱动器、角位移传感器等组成。
This system consists of steering electronic control unit (ECU), all hydraulic steering, stepping motor, stepping motor driver and angular displacement sensor, etc.
液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求,为此需要一套表面超精加工工艺及加工参数设定。
Requirements for hydraulic steering rack cylinder are very high, the rack cylinder should be durable, lubricants preservable and of seal. So, finish machining and parameter-set are necessary.
转向时,不可将方向“打死”,特别是在原地转向时,要留有一定的余量,保证液压转向系统处于正常工作状态。
Shift, the direction can not be "killed", especially when turning in place, it is necessary to leave some margin to ensure that the hydraulic steering system is in normal working condition.
文摘:液压转向机对齿条杆部表面有很高的耐磨、储油、封存要求,为此需要一套表面超精加工工艺及加工参数设定。
Abstract: requirements for hydraulic steering rack cylinder are very high the rack cylinder should be durable lubricants preservable and of seal. So finish machining and parameter-set are necessary.
设有液压输出接口,用户可以根据需要进行液压输出;轮距可调;转向系统分机械转向和液压转向,用户可以根据需要自由选择。
PTO according with international standard, hydraulic output interfaceadjustable treadmechanical or hydraulic steering are equipped with it for user's selection.
CCCD 3 B侧面叉车是一种新型的起重运输车辆,它采用液力传动,全液压转向,滚动式门架,具有造型美观大方,操作大件方便等特点。
CCCD3B side forklift is a new type of lifting transport vehicles, which USES hydraulic transmission, full hydraulic steering, rolling doors, with a nice shape, convenient operation.
CCCD 3 B侧面叉车是一种新型的起重运输车辆,它采用液力传动,全液压转向,滚动式门架,具有造型美观大方,操作大件方便等特点。
CCCD3B side forklift is a new type of lifting transport vehicles, which USES hydraulic transmission, full hydraulic steering, rolling doors, with a nice shape, convenient operation.
应用推荐