其方法代替了传统的手工测量，而且易于机器自动反馈控制玻璃棒的直径变化。
The method not only can substitute traditional manual measurement, but also can control the change of the diameter by machine conveniently.
分析齿轮主要参数，提出用测量跨棒（）和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法，并推导出螺旋角的计算公式。
In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.
已经设计出专门的探头来测量半导体晶圆片和半导体棒的电阻率。
Special probes have been designed for making resistivity measurements on semiconductor wafers and bars.
介绍了转子槽铣刀的对刀、成型棒铣刀的刀位调整、槽型的测量和质量控制方法。
This paper introduces the positioning of rotor milling cutter, adjusting position of shape milling cutter, the measuring method of slots and quality controlling.
文章介绍了在微型堆零功率实验装置上用脉冲法、断源法和周期法对原型微堆中心控制棒及反射层效率测量的结果，并进行了讨论。
The paper reports the measurement of the effectiveness of control rodreflectors on ZPR with pulse method, source cut method and period method. Theexperiment method and results are discussed.
通过鲁棒统计，提出了一个鲁棒估计算法处理测量结果和误差。
Through robust statistics, put forward a robust estimation algorithm to estimate measuring results and error.
本文介绍了一种简便的测量微波延迟线所用晶棒两端面间楔角大小的方法。
This Paper Presented a simple method for measuring wedge Angle between end-faces of crystal bar used in microwave delay lipe.
本文介绍了KDF2嘴棒成型机测控系统的工作原理，并给出了具体的测量控制电路。
This paper describes the principle of measurement and control system for KDF2 filter tip shaping machine, the detailed circuit of measurement and control is given.
测量结果表明，包括落棒时间在内的各种性能参数均满足试验要求。
The result of measurement proves that the drop property parameters meet the requirements of the design specification for Control Rod Drive Line.
提出了一种基于测量与校准功能合一的光学测棒的立体视觉坐标测量系统。
The paper proposes a stereo vision coordinate measurement system based on optical probe with the function of measuring and calibrating.
本论文提出一种采用光学测棒的三目视觉坐标测量系统，利用交汇成像原理实现三坐标测量。
This paper is mainly about a three-D coordinate measurement system, which is based on intersection converge imaging principle, using space probe.
提出了一种可应用于玻璃棒直径在线测量的图像测量方法。
This paper presents an on-line image measurement method that can be used to measure the diameter of glass rod.
实现了对棒位故障的判别、记录，实现了测量通道性能判定的自动化。
The identification and recordance of rod position fault, the performance validation of measure channel are realized also.
研究一类同时具有时变时延和测量数据丢失的不确定网络化系统的鲁棒无源滤波器设计问题。
The problem of robust passive filtering for a class of uncertain networked system with time varying delays and missing measurements is studied.
可以比较快的测量控制棒的刻度曲线。
To measure the calibrating curve of control rod more speedily.
用自适应过程减小参数不确定性的影响，并通过动态滑模控制器的高鲁棒性抑制机器人模型中的未知非线性动力学及测量噪声等的影响。
The adaptive process extenuates the influence of parameter uncertainty, and the robustness of the dynamic sliding mode control inhibits the influence of unknown dynamics and measurement noise.
预制棒至少一个几何参数的测量，包括确定软化区域至少一部分的轮廓，如颈部区域轮廓的图像。
Measuring at least a geometrical parameter of the preform may comprise determining the profile of at least a portion of the softened region e. g. an image of the neck region profile.
与单分辨率动态轮廓线面积测量方法相比，该方法具有鲁棒性强，平均值误差、单次测量误差及重复性误差小等优点。
Compared to the area measurement by a mono-resolution dynamic contour, this scheme is more robust with the smaller average error, single measurement error and iteration error.
提出一种采用刚性圆柱棒形测头测量渐开线齿形误差的新方法，介绍了测量原理及测量结果。
A new method employing rigid cylinder-shaped stylus for measuring the errors of involute tooth profiles of gears is presented. Its principle and measuring results are introduced.
提出几种计算和测量激光棒负透镜等效焦距的方法。
The authors have reported two methods for measuring the efficient focal distance of the laser rod lenses.
根据几个模型相加可提高模型的预测精度及鲁棒性的思想，提出了一种非线性软测量建模的新方法。
Inspired by the idea of combining models to improve prediction accuracy and robustness, a new method for nonlinear soft sensing modeling of chemical processes is proposed.
针对数字工业摄影测量中像片自动定向问题，提出了一种基于自动定向棒和编码标志的概略定向算法。
Aiming at the auto orientation of images in digital industrial photogrammetry, a preliminary orientation method based on AutoBar and codes is introduced in the paper.
根据棒、线材在线测径及外形轮廓测量的基本需求，有两种主要外径测量方法、三类轮廓测量方式。
According to the basic requirements of rods and wires in diameter online measurement and shape measurement , there are two main outer diameter measurement methods and three ways of shape measurement.
光纤预制棒相对于光纤而言，由于其尺寸大的特点，折射率分布的测量方法具有独特性。
Compared with optical fiber, optical fiber preform is characterized by its bigger size, so the measurement method for its refractive index profile has uniqueness.
广泛适用于铝、铜、钨、镍、铁、不锈钢等多种金属片、丝、棒的焊接以及电池，电真空器件，电子元件，小五金和热工测量仪表内部结构的装配和焊接。
Widely used in the welding of aluminum, copper, iron, stainless steel, and some vacuum wares, electronic components and the inner structures of the thermal measuring instruments.
本文测量了不同直径的PMMA燃料棒在逆风和静止环境中的火焰传播速度、裂解长度和火焰形状。
In this paper the flame spreading rate (Vf), pyrolysis length (lp) and flame structure of PMMA fuel rod in an opposed air flow and quiescent environment were investigated.
针对激光雷达提出一种鲁棒测量模型。
A robust measurement model for laser range finder was proposed for these purposes.
本文主要研究了一种新的测量方法——细光束扫描来测量光线预制棒的折射率分布。
In this paper a new measure method is described — the technique of thin beam scan to measure the distributing of refraction ratio of section plane of polymer optical fiber.
本文提出了测量自聚焦棒透镜周期长度的一种新方法。
A new method used for measuring the periodic length of Solfoc lens is presented.
本文提出了测量自聚焦棒透镜周期长度的一种新方法。
A new method used for measuring the periodic length of Solfoc lens is presented.
应用推荐