高灵敏度的氟里昂气体传感器是检测氟里昂泄漏的关键元件，本文叙述了氟里昂气敏器件的制作工艺、敏感原理、测试方法及测试结果。
Freon sensor with high sensitivity is key device for detecting freon leak. The manufacture technology, sensitivity mechanism, measure method and parameter of samples have beendiscribed in this paper.
针对某矿井主通风机，介绍了性能测试的方法及结果，总结了测定的特点。
The paper introduces the main ventilator in certain mine about test method for its properties and result, and concludes the characteristic of measuration.
测试结果表明，新的负载向量及新的阈值确定方法缩短了任务的响应时间，提高了集群的性能。
Experimental results show that the new load index and the new way to consider threshold decrease the executing time of tasks and improve the cluster's performance.
本文最后描述了该TPMS的软硬件调试、测试方法及相关结果。
Finally, the debugging, testing methods of TPMS and related testing results are depicted.
详细介绍了支架的结构、改造方法及性能测试分析结果。
In this paper, the construction, improving methods and the test of performance are introduced in detail.
介绍工作船码头采用轻型空心方块结构型式的断面模型试验方法、测试内容及试验结果，为设计提供依据。
It introduces the method, content and result of cross - sectional model test of light hollow block structure adopted for workboat wharf, which provides reference for design.
方法：记录28名ADHD患儿执行持续性操作测试的ERP和行为学结果，未服哌甲酯及服哌甲酯后2小时分别检测。
Methods: ERP elicited by the continuous performance test were recorded before and under methylphenidate treatment in 28 ADHD children and their behavioral performance were collected simultaneously.
本文介绍了一种采用4个厚膜功能模块构成的光纤数据传输中继器的设计方法，给出了具体电路及理论、测试结果。
The design of an optical fiber data transmitting repeater is described. This repeater is made of 4 special hybrid modules. The concrete circuits, measured and theoretical results are given.
目的探讨干扰血清镁测试结果的相关试剂及解决方法。
Objective: to investigate the interference of serum magnesium test results related to reagents and solutions.
本文从测试原理及方法入手，着重对测试结果的误差进行了分析与评估。
This paper lays emphasis on analysis and evaluation of the errors of test result in view of the measuring principle and method.
介绍了软密封闸阀的测试模型、方法及分析结果，对软密封和硬密封闸阀的结构及性能进行了比较和分析。
Introduce the test model, method and the analysis results of the soft faced gate valve, to carry on the comparison structure and functions of soft faced gate valve and hard faced gate valve.
在保证测试条件的前提下，两种方法所求得的刻线位置误差及由它得到的直径误差结果趋于一致。
With full testing conditions, the positional errors and the diameter error results obtained by beth methods are consistent.
详细地介绍了真空密封铸型抗压强度、抗剪强度、拉伸强度等的测试方法及用这种方法测得的结果。
The measuring methods and the measuring results of compressive strength, shearing strength and tensile strength of vacuum sealed mould are introduced in detail in the paper.
体积功能模块的扩展及临床测试的结果验证了上述方法的可靠性和实用价值。
All the results of the extension in software functions for organ volume determination and of the measurements for living animals have proved the correctness and reliability of the method.
文章提供了实验方法和实验细节，讨论了测试误差及测试结果。
In this paper, the experimental pattern and details were presented and the errors and results of the measurement were discussed.
阐述了用聚焦法在菲涅尔区测试相控阵天线的理论依据及实现方法，用实验结果对近远场方向图进行了比较。
There are many methods to measure the pattern of phased array antenna, such as the technique of plane scanning in near field, focusing method in Fresnel zone, general method in far field, etc.
文中介绍了模拟件的结构及试验方法，给出了测试结果和有关结论。
Compression strength testing of rocket interstage structure simulators which were composed by those circular tubes were carried out. Testing methods and results were given.
测试及分析结果表明，应用数字图像相关法测定瓦楞原纸的方法是可行的，具有较佳的应用价值，能为研究纸张的泊松比提供一个新途径。
Test and analytic results showed that DIC was feasible, and had actual using value, and was a new approach to test and investigate Poisson′s ratio of paper.
重点介绍脉冲式染料激光器的波长覆盖范围及用光栅和法布里-珀罗标准具压缩谱线宽度等研究工作、实验结果及测试方法。
Emphasis is put on the experimental research on its tunable range and the bandwidth narrowing with a diffraction grating and a Fabry-Perot etalon.
介绍了中国建筑材料燃烧性能的评价（分级）体系，其中包括被测材料性能的界定，测试采用的方法及对测试结果的评判等。
The evaluation (graduated) system of burning behavior of building materials, including boundaries methods for determination and evaluation of determined results, were introduced.
最后讨论了通信协议的测试，简单介绍了协议测试内容及方法，分析了测试结果，得出了测试结论。
The end of the paper discusses the test of the communication protocol, simply introduces the content and method of the test, analyzes the result of the test and achieves the conclusion of the test.
介绍了高性能的宽带检波器的CAD设计方法及测试结果。
In this paper, CAD design and experiment results for a high performance broadband detector are presented.
根据测试程序及方法完成测试任务，并及时提供测试结果反馈。
Fulfill assigned testing tasks according to Testing Process & Methodology and provide feedback timely.
之后重点阐述了接收机的设计方法及过程，最后给出了高温超导信道化接收机主要部件以及整体系统的测试结果。
The method and process of the receiver designing are described. Finally, the testing results of the main components of the receiver and the overall system are presented.
方法对102名性传播疾病高危人群个体及100名大学生进行艾森克人格问卷(EPQ)测试，将性传播疾病高危人群组的测试结果分别与常模及大学生组进行比较。
MethodsEysenck personality questionnaire (EPQ) survey was conducted in 102 persons of STD high-risk group and 100 college students, and a comparison between them was made.
最后，根据系统的测试方案给出了具体的误差模型及误差的校准方法、校准步骤，使得测量结果更为准确可靠。
At the end of this dissertation, we present the model of calibrating the error and calibration steps, which is on the basis of the design proposal.
论文介绍了整个硬件和软件的测试平台、驱动程序的调试方法、驱动程序的测试流程，并给出了测试结果及测试结论。
This dissertation briefly introduces the test platform for the hardware and software, the method of debugging the driver, as well as test course, and gives the result of the test.
这一测试结果与利用自由落杆测试系统得出的测试结果基本吻合，表明本文所采用的测试系统及实验数据处理方法是可信的。
The test results are coincident with the previous results by dropping-bar test system, which shows that the characterization system and the data processing method used in this paper are reliable.
测试结果表明，用该方法研究快速继电保护特性及现场事故分析能够满足工程要求。
The experimental result showed the system can meet the requirements of monitoring on the braking system of the locomotive in real time.
测试结果表明，用该方法研究快速继电保护特性及现场事故分析能够满足工程要求。
The experimental result showed the system can meet the requirements of monitoring on the braking system of the locomotive in real time.
应用推荐