进口工业网的VIP系列可见视图投影仪是可见光和NIR照相机的一套完整测试和校准系统。
The VIP series of Visible Image Projectors are complete test and calibration systems for Visible and NIR cameras.
通过对标准高速光探测器的测试和校准，得到的结果与制造商提供的数据表相当符合，证明了该测试方法的准确性和有效性。
Results calibrated by our method agree well with data provided by the manufacturer, thereby demonstrating the accuracy and effectiveness of this method.
加利福尼亚仪器公司作为其电子企业集团(EIG)的一部分加入AMETEK，该集团是先进监视、测试、校准和显示仪器的提供商。
California instruments joins AMETEK as part of its Electronic instruments Group (EIG) — a provider in advanced monitoring, testing, calibrating, and display instruments.
但在搜寻正式开始之前，这架世界上最为复杂的仪器还需要由众多将对其进行操作的研究人员进行校准和测试。
Before the search can begin in earnest, though, the world's most complicated machine has to be calibrated and fathomed by the legions of researchers who will operate it.
维护，校准和升级测试系统。
给系统添加制冷剂，检查和测试的调节器，校准系统，并进行日常维护或维修。
Recharge system with refrigerant, check and test regulators, calibrate system and perform routine maintenance or servicing.
制定全部质量检查、测量和测试设备的校准程序。
Develop procedures to calibrate all of your quality-oriented inspection, measuring, and test equipment.
同时利用单片机和微计算机对传感器输出信号进行实时动态处理，使本传感器系统具备了参数和测试精度的自校准功能。
Meanwhile, using SMC and computer to dealing the real time dynamic to the out put signal makes this transducer system has parameter and the proofread function of measure the precision.
与光学，机械和出厂测试团队密切合作，以便建立生产线测试与校准站点。
Work closely with optical, mechanical and factory test team to bring up production line test and calibration stations.
该系统在现场条件下可对多种不同型号的ATE、专用测试设备进行自动化综合计量校准，提高了计量保障效率和质量。
The system can perform automatic synthesis calibration of much more types of ATE and Special Purpose Test Equipment. Servicing efficiency and quality of measurement support is improved.
你是否有保持校准每个单位的计量和测试设备记录？
Do you maintain records of calibration for each unit of measurement and test equipment?
密切关注制造工艺和新产品工程师，以便架构，界定和传输光学特性设备和各项测试及校准装置。
Work closely with manufacture process and NPI engineer to architect, define and deliver optical characterization equipment and various test and calibration fixtures.
脉冲火花机的校准是把数位电压表直接接在测试电极和地之间。
The impulse test equipment shall be calibrated by means of a peak detecting electronic voltmeter connected directly between the electrode head and ground.
然而，两组通道必须被用于进行开路和短路校准，所以，系统最多仅能测试8个电容器。
However, two sets of channels should be used to perform open and short calibration, so the system can only test up to eight capacitors.
所有量规和测试设备有效校准。
为了能够对DCCT的性能进行检测和校准，设计研制了高精度直流传感器DCCT标准测试系统。
High Precision Standard Testing System for DCCT is designed and developed in order to detect and adjust the capability of DCCT.
安装和执行，组件，系统和校准测试。解释测试结果以确保在检验产品符合有关规范。
Setup and perform board level, subassembly, system and calibration tests. Interpret test results ensuring products being tested meet pertaining specifications.
介绍了近区场强仪的核准原理和方法，着重介绍了近区场强议的自动校准测试系统和软件的研究。
The calibration principle and method of the near region field strength meter are described, especially its auto calibration and test system and the study of software.
主要课程包括：仪器校准、设计和安装测试、系统安全与维护、采购和安装程序以及报告的编写。
Some course topics may include: instrument calibration. design and installation testing. system safety and maintenance procedures. procurement and installation procedures. and report preparation.
校准设备和测试设备需按《检验、测量和试验设备控制程序》规定进行预防、搬运、储存。
The calibration and test equipment shall be preserved, handled and stored in accordance with the "Inspection, Measuring and test equipment Control Procedure".
主要课程包括：电子电路指令、原型开发和测试、系统分析和测试、系统维护、仪器校准、报告的编写。
Includes instruction in electrical circuitry. prototype development and testing. systems analysis and testing. systems maintenance. instrument calibration. and report preparation.
该系统主要完成两大类功能：测试低噪声器件的噪声温度和校准固态噪声源的超噪比。
The system provides two major functions including measuring noise temperature of low noise devices and calibrating the Excess noise Ratio (ENR) of solid-state noise sources.
集成电路测试系统的校准关系到集成电路测试结果的准确性和可靠性。
Calibration of IC test system is critical to the precision and reliability of IC test results.
探讨实验室在使用测试软件时，为保证其在检测和校准活动中的适用性，对测试软件的控制原则。
This paper discussed the control principles of testing software when laboratories using it in their testing or calibration activities.
介绍了自校准、低功耗气体测试仪的硬件和软件设计。
This paper introduces the hardware and software design of the gas detector with self-calibrated and low power.
我们通过长期的实践摸索，对各种类型的酶标仪进行了系统的测试和论证，初步建立了一套为保证酶标分析仪工作可靠而制定的性能评价和校准方法。
We test and demonstrate all type of enzyme micro-plate reader, and finally establish a calibration method for guaranteeing the stability and reliability of enzyme micro-plate reader.
它被用作轨道上的卫星校准和测试远程感应系统的目标。
It is used as a target for 10 calibrating and testing 11 remote sensing systems on satellites in orbit.
最终，使用校准后的载荷因子和位移因子去测试标准样品熔融石英，测试结果远远优于未经校准的值。
At last, the calibrated value of LSF and DSF are used for testing the fused quartz sample with known modulus.
结合本单位软件评测实验室GJB 2725A-2001《测试实验室和校准实验室通用要求》的认可工作，对软件测试质量管理体系的构建和运行进行了研究和实践，具有指导作用。
Combining the authentication of GJB 2725A-2001, how to carry the software testing process was discussed in this paper, it does a practical role in software testing area.
测试出了低温下该滤光片中心波长漂移参数，并给出和分折了校准后的测试结果。
The shifting of center wavelength with the temperature is analyzed and tested. The shifting-adjusted filter is given out.
应用推荐