成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。
Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.
热流系统的作用就是把材料送到模内的每一浇口。
The function of the Heat flow system is to sent materials to sprue gate.
透明塑料盒盖注射模采用点浇口进料，脱模机构采用推板推出时，增设引气辅助推出机构，可确保制件顺利脱模。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。
In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.
算例表明所提出的方法适用于注塑模浇口位置优化，并且有较好的计算效率和精度。
Numerical examples show that the method is suitable for designing optimal gate location and gives high efficiency and accuracy.
介绍了推杆自动切断浇口机构在热固性塑料注射模中的具体结构、 模具工作过程。
The structure, operating principle and action of mechanism of automatic sprue cutting by ejector pin in thermosetting plastics injection mould was described.
前言：为了保证一种既有斜齿轮又有直齿轮零件在注塑成形后能顺利脱模，给出了一套一模两位，点浇口进料，旋转脱模，胶套式二次分型的双分型面注射模的设计。
To make sure that a plastic part with helical gear and spur gear can be demoulded successfully, an injection mould is designed with double parting faces, point gate feeding and rotating demould.
在一模二腔的厨具塑料配件注塑模结构中，采用扇形浇口进料，提高了进料的均匀性并降低了塑件的内应力。
A fan-shaped gate was used for feeing in the injection mold with two cavities for kitchenware fitting, enhancing uniformity of material feeding and reducing internal stress of the plastic parts.
预测可能存在的气泡位置及锁模力的大小，确定最佳浇口位置。
In order to obtain the best gate location addition, the position of air bubble and the clamp force were forecasted.
预测可能存在的熔接痕位置及锁模力的大小，确定最佳浇口位置。
In order to obtain the best gate location addition, the position of weld lines and the clamp force were forecasted.
三板模；点浇口；模外定距分型；定模限位顶出；模具结构。
Three-plate mold; Pointed gate; Mold ranging parting; Restricted ejector of fixed-die; Mold structure.
对透明塑料罩壳注射模结构，采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
分析了打印机导纸器塑件工艺特点，介绍了注塑模结构、浇口设计方案和模具工作过程。
It analyzed the technological characteristics of plastics article of leading paper device of printer, and introduced the structure of injection mould, the gate design, and the work process of mould.
介绍了光盘注射模冷却系统的设计方法，以及动镜面、定镜面、浇口与凸模的冷却水路等。
The design manner of cooling system of CD injection mold was mainly introduced, and the cooling water channel of moving plate, stationary plate, sprue and punch etc were detailed.
对于中心位置浇口，由于产品顶出后模具配件和浇品处披锋阻碍很难去掉而造成动模与定模不能分开。
In the case of center-positioned gate, moving die is not separated from fixed die due to the interference of the biscuit part and the cutting of gate is ery difficult after pulling out the product.
同时当浇口均设置为保压结束时关闭，成型中的注射压力、锁模力以及制件质量较为理想。
When the close time of the nozzles was set at the end of packing, the injection pressure, clamp force and parts quality were all better.
以某继电器的推动卡为例，介绍注射模上一种实用的自动切浇口结构。
Taking the card of certain relay as an example, introduced a practical structure witch can cut the gate automatically on the injection mold.
介绍了注射模结构，浇口设计方案和模具工作过程。
The structure of the injection mould, the design plan of the gate and the working course of the mould are introduced.
论述了塑料注塑模直浇口式主流道参数的设计与计算方法，倾斜式主流道的形式、尺寸选取，最后举例说明了倾斜式主流道的应用。
The design and the calculation methods of the parameter of the routine main sprue and the style and the dimension selections of the leaning main sprue are discussed.
本实用新型属于铸造用辅助部件，特别是一种使用时操作简单、且可重 复使用的消失模铸造用浇口杯。
The utility model belongs to an auxiliary part for casting, in particular to a runner cup for lost foam casing, which has the advantages of simple operation and repeated use during usage.
使用时只需将浇口杯底部的内台阶孔插在消失模的直浇道上即可。
When the runner cup is used, the inner stepped hole arranged at the bottom of the runner cup is inserted into the downsprue of the lost foam.
懂得通过在模壳上包裹耐火石棉来达到高效率的浇口系统和梯度冷却效果。
Understands high efficiency gating and gradient cooling techniques via mold insulation wrapping.
懂得通过在模壳上包裹耐火石棉来达到高效率的浇口系统和梯度冷却效果。
Understands high efficiency gating and gradient cooling techniques via mold insulation wrapping.
应用推荐