介绍了阀体三通管注射模的结构。
The structure of the injection mould for the valve tee was introduced.
本论文介绍了电子钟后盖的注射模设计过程。
This paper introduced the electronic clock back of the injection mold design process.
详细介绍了注射模结构和热流道系统的设计。
The design of the mould structure and hot runner system was introduced in detail.
对透明塑料罩壳注射模结构，采用点浇口进料。
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
分析了一种型芯较长的注射模结构及成型特点。
The structure and shaping characters of injection mold with long core get analyzed.
可进行冷冲模和注射模等各类模具的设计与制造。
Designing and manufacturing sheet metal tool, injection mould, and more.
主要阐述了注射模的分型面以及它的顺序、定距分型。
The injection mould parting line and its sequence as sizing space split were described.
本毕业设计说明书详细介绍订书机外壳塑件的注射模设计。
This graduate design instruction book has introduced the design of the book sewer outside shell injecting molding in detail.
简要介绍了异型线圈骨架注射模哈夫结构的设计和制造要点。
Design and manufacture points of injection mold of the special-shape coil skeleton were briefly introduced.
分析了发夹的工艺特性，介绍了发夹注射模的结构设计和工作原理。
Analyzed the technology characteristics of the barrette, introduced the injection mold structure and work principle.
详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。
The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.
介绍了清净管体注射模的设计与制造方法，并阐述了模具的工作过程。
Design and manufacture methods of injection mold for the defecator body were introduced, and working process of mold was stated.
介绍当塑料件留在动或定模中时，注射模双脱模结构的设计及其特点。
The design and characteristics for the double stripper mechanism of the injection mold arc introduced.
本文主要阐述了塑料模具之一注射模在注射机上的安装之后的调试过程。
This article mainly expounds the debugging process of injection mould after installing it on the injection machine.
本文论述卧式塑料注射模中非刚性嵌件安放机构的设计及工作实现原理。
Present article discussed the design and working mechanism of the insertion in the horizontal injection mould.
介绍了医用软管塑件结构、工艺分析、注射模结构设计及模具工作过程。
Introduced the structure of medical soft plastic tube; and technology analysis; and structure design of injection mold and mold work principle.
运用可靠性设计原理， 对塑料注射模常用的斜导柱式抽芯机构进行分析。
By using the principle of reliability design, the withdrwal core mechanism with bevel lead column in plastic injection mould is analyzed.
详细介绍了剃须刀头架注射模设计过程，重点介绍了滑块抽芯机构设计特点。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
注射模冷却系统的设计不但关系到塑件质量而且也关系到注射成型生产效率。
The cooling system greatly influences both the quality of plastic production and efficiency of the injection molding.
介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。
Introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.
分析了笔尖和笔杆的结构特点与成型工艺，介绍了该类零件的注射模结构特点。
Analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.
分析了绝缘器零件的结构及工艺要求，介绍了绝缘器注射模的结构特点及工作过程。
The structure and process requirement of the parts of the insulator was analysized, and the structure and working process of the injection mould for insulator was presented.
介绍了推杆自动切断浇口机构在热固性塑料注射模中的具体结构、 模具工作过程。
The structure, operating principle and action of mechanism of automatic sprue cutting by ejector pin in thermosetting plastics injection mould was described.
介绍注射模冷却模拟技术的基本原理及在注射模冷却系统和工艺参数设计中的应用。
The basic principle of cooling simulation technology and its application in the injection mold cooling system and the design of the processing parameters are introduced.
叙述了外壳注射模在试模中出现的问题，分析了问题产生的原因并改进了模具结构。
The questions of testing outer covering injection mold are stated, analysis on the reason and the mold structure is improved.
从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。
The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.
针对注射模中滑块结构的广泛应用，详细介绍了注射模滑块的各种结构类型与设计要点。
According to the wide application of slide block design in injection mold, introduced in detail structure types and design points of injection mold slide block.
根据接线盒盒体的功能、结构与尺寸，进行了材料性能、注射工艺等分析，设计了注射模。
According to the function and structure and dimension of junction box, the material capability and injecting technology were analyzed, the structure of injection mold was designed.
分析了数码相机后盖塑料件的工艺特点，介绍了数码相机后盖注射模结构设计和工作过程。
The technological characteristics of back cap of digital camera were analyzed, and the structural design and operating process of the injection mould were introduced.
介绍了开闭器的结构及其工作原理，分析了开闭器在注射模开模过程和推出机构中的应用。
The structure and working principle of switching ware are introduced, the application of switching ware in opening process and rejecting mechanism of injection mold are analyzed.
应用推荐