本设计进行了一款开关座的注塑模设计，对零件结构进行了工艺分析。
This paper presents the design of a molding model of switch and its process analysis.
介绍了一个注塑模冷却分析软件系统。
A software for cooling analysis in injection molding is introduced.
将灵敏度分析方法引入注塑模温度场CAE中，是如何实现冷却系统自动优化设计的核心，也是冷却系统设计的一个重要方向。
It is a key to introduce sensitivity analysis method into injection mould CAE for cooling system automatic and optimum design. It also becomes an important content in cooling system design.
以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。
Moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.
摘要：通过对塑料洗衣机把手工艺的分析，设计了一副一模两腔的注塑模具。
Abstract: Designed a one-mode two-cavity injection mold through the analysis of the handle of washing machine.
通过对洗衣机波轮轴承的结构特点与模具设计方案的分析，介绍了洗衣机波轮轴承注塑模的结构与工作过程。
Based on the analysis of the structure characteristics of wave wheel of washing machine and the mould design project, an injection mould for this part was designed.
通过用注塑模CAE软件MOLDFLOW对塑件进行模流分析，选择聚丙烯的成型工艺参数，设计了一模一腔的注射模具。
An injection die with a mold cavity was designed though using the injection mold CAE software MOLDFLOW to simulate plastic flow and choosing the molding parameters of polypropylene.
本文在分析注塑模充模流动的基础上，通过具体实例，阐述了计算机辅助分析在模具设计中的作用。
Based on the analysis of polymer flow in mold filling, the important role of computer aided analysis in injection mold design is presented through concrete examples.
利用专业模流分析软件MPI对大型注塑模具的滞流效应进行了分析、研究。
The hesitation effects of large injection mould are researched and analysed based on MPI.
本课题主要是针对盒盖的模具设计，通过对塑件进行工艺的分析和比较，最终设计出一副注塑模。
Through the process of plastic parts for analysis and comparison, the final design of an injection mold.
利用注塑模cae技术可在模具制造之前对模具设计方案进行模拟分析，预测潜在的缺陷并及时修改。
The mould design can be analyzed and simulated in computer and potential defect can be predicted and corrected before mold is made by using injection mould CAE technique.
本设计对肥皂盒进行的注塑模设计，利用Mcam软件对塑件进行了实体造型，对塑件结构进行了工艺分析。
The design of injection mould for soap box Mcam software design, use of plastic parts of the entity model, plastic process analysis.
通过对洗衣机排水阀塑料件的分析，设计了洗衣机排水阀注塑模。
Through the analysis of the drain valve of washing machine, an injection mould for the drain valve was designed.
本设计进行了聚丙烯套的注塑模设计，对零件结构进行了工艺分析。
This design has carried on the polypropylene set of note mold design, has carried on the craft analysis to the components structure.
分析了打印机导纸器塑件工艺特点，介绍了注塑模结构、浇口设计方案和模具工作过程。
It analyzed the technological characteristics of plastics article of leading paper device of printer, and introduced the structure of injection mould, the gate design, and the work process of mould.
分析了螺盖的结构特点，介绍了螺盖注塑模的结构和工作过程。
The forming character of screw cap is analyzed, and screw cap injection mold is designed.
传统的注塑模CAE分析可以事先发现注塑成型中的潜在问题，如翘曲等，但是不能实现注塑工艺参数优化。
The traditional CAE analysis of plastic injection molding can only reveal potential problems in plastic injection, such as warp, but it does not optimize the process parameters.
本设计进行了一款拉线盘的注塑模设计，对零件结构进行了工艺分析。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
本设计进行了一款手机翻盖上盖的注塑模设计，对零件结构进行了工艺分析。
The design of the mobile phone owner section superstructure cast mould design, structural parts for the craft analysis.
本文首先对注塑模结构CAD的重要性及尚存在的问题进行分析。
The importance of the structure CAD of plastic injection mold and existing problems are reviewed first.
分析了PET瓶坯的成型工艺，包括PET树脂的干燥、模具工作部分的温度控制等，阐述了热流道注塑模的结构及工作原理。
The forming technology was analyzed, including drying of PET resin and the temperature control of mold work section. The construction of a hot runner mold and its mechanism were described.
分析了PET瓶坯的成型工艺，包括PET树脂的干燥、模具工作部分的温度控制等，阐述了热流道注塑模的结构及工作原理。
The forming technology was analyzed, including drying of PET resin and the temperature control of mold work section. The construction of a hot runner mold and its mechanism were described.
应用推荐