其常用的方法有真空低温加热法、液氮法、胶囊法、风味配对法、泡沫法、分解法等。
The commonly employed approaches include vacuum low-temperature heating, liquid nitrogen method, capsule method, flavor pairing method, bubble method, decomposition method, and so on.
在所有这些之上,多德·弗兰克法还给监管者布置了另一项工作,那就是识别并对危及金融市场稳定的苗头做出反应,特别是资产泡沫。
On top of all this, Dodd-Frank gives regulators another new job, of identifying and responding to emerging threats to financial stability, particularly asset bubbles.
它巨大的财政刺激机成功的阻止了20世纪90年代泡沫破裂后的经济萧条,今日其他国家沿行这一方法无疑是正确的。
Its large fiscal stimulus succeeded in preventing a depression in the 1990s after its bubble burst-and others are surely correct to follow today.
我们有很多种烫法:普通烫、冷烫、直发烫和泡沫烫。
We have many kinds of permanent: regular, cold perm, straight perm, and foam.
用梯温炉法确定了泡沫玻璃的发泡温度。
This article obtained foam temperature of foam glass by means of gradient furnace.
选用不同的降解剂,采用醇—磷酸酯法降解废旧聚氨酯泡沫,对降解产物进行性能测试。
In this paper, different kinds of alcohols and phosphates are chose to degrade scrap polyurethane foam and the performance of catabolite is tested.
本文研究的是粉体致密化发泡法(PCF)制备铁基泡沫工艺。
The paper described Fe foam produced by a Powder-Compact Foaming (PCF) process.
粉末冶金发泡法是目前泡沫金属研究领域的一个热点方向。
Powder metallurgical foaming method becomes an important research aspect in the field of metallic foams.
前言:目的:为找到泡沫浮选法去除废水中铬离子活性较好的表面活性剂,对表面活性剂种类进行探索。
Objective: to find good activity surface activity dose which eliminating chromium ion in the waste water by using foam flotation method to determine the kinds of the surface activity.
熔体发泡法生产泡沫铝合金,因其生产工艺相对简单、成本低,因而最具有工业化规模生产的前途。
Melting bubble method perpetrating foam aluminum alloy is one of the most the industrialization scale production in the future because its production craft relatively simple, the cost is low.
并提出了泡沫浮选法,分析了其应用的可行性。
A bubble floatation method is proposed, of which the application potential is analyzed.
采用空间回路网法计算得到填充吸波泡沫的碳纤维复合材料格栅结构的电磁散射性能。
The spatial network method is used to calculate the electromagnetic wave scattering characteristic of carbon fiber composite grid structures filled with Absorbing foams.
介绍了焦炉煤气氨法H PF脱硫装置的操作经验,并对硫泡沫的处理工艺进行了改造。
The operating experience of HPF coke oven gas desulfurization system based on ammonia process is described in this paper, and the modification on sulfur foam treatment process has been made.
采用化学沉积法和电化学沉积法制备出了泡沫镍。
The foamed nickel manufactured by electroless and electro-deposition is introduced.
我们有很多种烫法:普通烫、冷烫、直发烫和泡沫烫。
Hairdresser: Oh, we have quite a variety: regular, cold perm, straight perm, and foam.
粉末实体发泡法泡沫铝制备工艺包括混合、压制和发泡三个过程。
Powder compact foaming process for producing aluminum foams consists of mixing, compacting and foaming.
提取泡沫或罐式香槟法是在高压炉里的第二次发酵,能够使酒起泡沫,因为酵母产生了二氧化碳。
The taking of foam or Charmat Method is the second fermentation in autoclave that makes the wine sparkling, because of the carbon dioxide generated by the yeasts.
污泥膨胀和生物泡沫现象是众多泥法污水厂常见的运行难题。
Sludge bulking and biological foams of activated sludge process are usual problem in the operation of wastewater treatment plant.
并探讨了物理气相沉积涂层法对泡沫橡胶表面进行处理的可行性。
The feasibility of the foam rubber surface processing by physical vapor deposit coating was discussed.
在此基础上,对渗流铸造法中影响泡沫铝合金孔结构的其他工艺因素也进行了研究。
Based on these, the technique factors that influence the foam aluminum pore structure in the infiltration casting were studied.
介绍了多孔泡沫金属材料常用的传统制备方法(铸造法、发泡法、烧结法和沉积法)及具体应用。
This paper reviews the conventional preparation techniques that include casting, forming, sintering and deposition and practical application for every technique of foam metal.
本论文采用液体法、固体法和硅橡胶法三种不同的方法制备有机硅泡沫材料,分析了三种制备方法的反应机理。
There are three ways, which include liquid, solid and rubber, to make silicone foam, analyzing the reaction principles in preparation of silicone foam.
采用施工现场混凝土立方体非绝热温升试验和反演分析相结合的方法,对聚苯乙烯泡沫塑料板外贴法的保温能力进行分析研究。
With an approach of combination of thermal rising test of cubic block in-situ and back analysis, the thermal retardation capability of polystyrene foam board is analyzed.
介绍了泡沫铅材料的主要制备方法——渗流铸造法、粉体发泡法和电沉积法。
The primary preparing methods of lead foam material such as infiltration casting process, powder foaming process and electrodeposition process were introduced.
本论文阐述了一种新的泡沫铝制备方法——粉体发泡法。
In this paper, a new method-powder foaming method-was bringing forward.
开发了一种新的低成本防团聚方法——泡沫悬浮法。
A new anti-agglomeration method with low cost was developed.
采用水喷雾法,通过稀释和机械作用破坏泡沫。
Water sprays are used to break the foam by dilution and mechanical action.
泡沫分离法以及大孔吸附树脂法都能够达到较高的收率。
Foam separation and macroporous resin was up to a higher recovery rate.
通过分析认为目前泡沫陶瓷最理想的制备方法是有机前驱体浸渍法;在陶瓷粉料中适当加入陶瓷纤维,会改善发泡反应法制品性能;
It was pointed out that the organic precursor method is a good choice at present and addition of ceramic fibers into ceramic powders may improve the process of the foaming method.
通过分析认为目前泡沫陶瓷最理想的制备方法是有机前驱体浸渍法;在陶瓷粉料中适当加入陶瓷纤维,会改善发泡反应法制品性能;
It was pointed out that the organic precursor method is a good choice at present and addition of ceramic fibers into ceramic powders may improve the process of the foaming method.
应用推荐